Aalberg Audio trym TR-1 User Manual

Manual is about: Tremolo Pedal

Summary of trym TR-1

  • Page 1

    1 user manual trym tr-­‐1 user manual rev. 1.0.1, july 1 st , 2015 congratulations! You are now the owner of the trym tr-­‐1 tremolo pedal! Trym is a high-­‐quality, custom aluminum housing tremolo pedal with true bypass. It can be controlled like a stand-­‐alone effects pedal or use the aero tm ae-...

  • Page 2: Contents

    2 contents 1. Getting started ............................................................................. 3 2. Controls ........................................................................................ 3 3. Overview ..............................................................................

  • Page 3: 1.  Getting  Started

    3 1. Getting started to get your pedal up and running you need a standard 9v dc, 2.1 mm plug, center negative power supply (minimum 250 ma). You will find the connector at the back of your pedal. The pedal supports both mono and stereo connections. Combinations of these will lead to different proper...

  • Page 4: 3.  Overview

    4 3. Overview *set active parameter for aero tm ae-­‐1 wireless controller.

  • Page 5

    5 4. Technical specifications power supply (not included) 9v dc, 2.1 mm plug (center negative) current draw 250 ma input impedance@1khz ~1m ohm output impedance@1khz maximum input signal 3.22 vp-­‐p (2.28 vrms) sound quality (sample-­‐/bit rate) 48 khz/24-­‐bits connectors -­‐ input (mono/stereo) -­...

  • Page 6: 5.  Software  Update

    6 5. Software update update app estimated ready: after summer 2015 performing software updates on your wireless aalberg audio product is easy: 1. To set your device in software update mode: • for aero: i. Turn off the aero (slide switch set to ‘0’) ii. Press and hold rotary knob button and preset bu...

  • Page 7

    7 4. The aalberg audio device set to update mode will now show up in a list in the aalberg updater, and you can check the current revision of the software found on the device. 5. You can now choose if you want to update to the latest software available. 6. A status bar indicates the upload process a...

  • Page 8

    8 * 6. Wireless control -­‐ pairing currently: one aero-­‐one pedal communication only! One aero – multiple pedals ready after summer 2015 in order to control your aalberg effects pedal using the aero wireless controller (optional) you need to pair the devices. Below is a step-­‐by-­‐step guide: 1. ...

  • Page 9

    9 iv. The lowermost led in all of the three ledbars lights up when aero in pairing mode is detected v. Repeat step i-­‐iv for any additional aalberg effects pedals 2. Confirm pairing: i. When you have repeated the above steps for all of your aalberg pedals, you need to press and hold the rotary knob...

  • Page 10: 7.  Input/output  Setups

    10 7. Input/output setups the aalberg trym tm tr-­‐1 tremolo pedal offers the following mono/stereo configurations: 1. Mono in/mono out 2. Stereo panning 3. Dry/wet split 4. Dual mono 1. Mono in/mono out connect your instrument to mono in and the amplifier to mono out. 2. Panning stereo connect your...

  • Page 11

    11 3. Dry/wet split connecting your instrument to stereo in will split the dry/wet signal as follows: • mono out: 100% wet signal • stereo out: 100% dry signal 4. Dual mono this is useful if you want to maintain the stereo path for pedals in the signal chain. Connect the stereo outs from the previou...

  • Page 12: 8.  Disclaimers

    12 8. Disclaimers all use of our products is undertaken at your own risk and expense and aalberg audio cannot be held liable for any direct or indirect losses or cost incurred through use, default or malfunction of our products. Repair or replacement of defective units under our warranty provisions ...

  • Page 13

    13 product needs to be accompanied by a copy of your receipt, serial number, return address, phone number, e-­‐mail address and a brief explanation of the problem. If the product is altered or repaired by someone unauthorized by aalberg audio the warranty is no longer valid. Stores and distributors ...

  • Page 14: 10.  History

    14 10. History the inspiration for the delay pedals with wireless controller came to guitar player and inventor rune aalberg alstad back in 2009, when he was tired of having to run over to the pedals and bend down all the time to change the effect settings. In 2012 he met the engineer torkild indstø...

  • Page 15: 11.  Ipr-­‐Related

    15 11. Ipr-­‐related design protection pending in eu & usa international patent pending pct/no2014/050236 12. Compliance aalberg audio accept and follow these regulations and directives. 13. About aalberg audio aalberg audio as is located in trondheim, norway. We produce wireless guitar effects with...

  • Page 16

    16 www.Aalbergaudio.Com trondheim norway ™ and © 2015 aalberg audio as. All rights reserved. The information in this manual is subject to changes without further notice..