Standalone mechanical card reader model #’s 11-024 & 11-024i user/installation manual www.Americanaccess.Com “your partner in access con trol”.
Page 2 american access systems / security brands, inc. Aas 2-year limited warranty this warranty applies to all product or equipment specifically and solely designed for and manufactured by american access systems, inc. Any equipment used in aas products that is not manufactured by american access s...
Page 3 american access systems / security brands, inc. Technical/customer support 1-303-799-9757 or techsupport@securitybrandsinc.Com 1675 west yale ave. Englewood, co 80110 phone: 303-799-9757 fax: 303-799-9756 sales@securitybrandsinc.Com www.Securitybrandsinc.Com security brands inc.
Page 4 american access systems / security brands, inc. Black white to gate operator reader module 100 ohm 10 watt use resistor if voltage source is 24 volts. 12 or 24 volt source from gate operator night light hookup wiring diagram.
Page 5 american access systems / security brands, inc. The idle mode the idle mode is the mode of operation in which the unit sits and waits for data from the keypad. When a key is pressed you will have approximately 3 seconds between keypresses before the unit resets. The led’s the yellow led serve...
Page 6 american access systems / security brands, inc. Mounting bracket brass nut program cartridge card reader module instructions remove the brass screws and slip the reader module from mounting bracket place the program cartridge between the reader module and the mounting brackets and reassemble ...
Page 7 american access systems / security brands, inc. Customer service and tech support customer service: 303-799-9757 customer service is available free of charge. Hours are 8:00 a.M. To 4:30 p.M. Mst. If you call, please have your model and serial number to help our technicians assist you. E-mail...
“your partner in access control” www.Securitybrandsinc.Com security brands inc.
