- DL manuals
- AAS
- Intercom System
- PROX 2000 II 23-206
- User & Installation Manual
AAS PROX 2000 II 23-206 User & Installation Manual
Summary of PROX 2000 II 23-206
Page 1
Prox 2000 ii model 23-206(i) user/installation manual www.Americanaccess.Com your “ partner ” in access control.
Page 2: 1675 West Yale Ave.
Page 2 american access systems / security brands, inc. Aas 2year limited warranty what item(s) this warranty applies to: american access systems “prox 2000 ii (23-xxxx series)” access controls. What is covered: any defect in materials or workmanship. For how long: two years from date of purchase. Wh...
Page 3: Parts Checklist
Page 3 american access systems / security brands, inc. Parts checklist enclosed with this box you should have the following items. Qty description 1 post mount station 1 16.5 vac 20va transformer if any of the above items are missing from this box, contact american access systems tools needed for ba...
Page 4: Before Proceeding
Page 4 american access systems / security brands, inc. Before proceeding to take full advantage of the 24 month limited warranty, you must be registered with american access systems. Please read the enclosed warranty statement, (pg 2), fill out the warranty registration card provided and send it to:...
Page 5: Step
Page 5 american access systems / security brands, inc. Step 2-system connections hookup steps (a). Make all your prox slave connections before you apply power to the master unit. To connect power to your new post mount unit plug the tranformer into an outlet and connect the other end to the power pl...
Page 6
Page 6 american access systems / security brands, inc. Using a slave with the prox 2000 ii the prox 23-206 communicates with one additional slave proximity reader utilizing wiegand technology. . Please see instruction manual included with the 23-006. Note: connect additional proximity reader to slav...
Page 7: Function Codes
Page 7 american access systems / security brands, inc. Function code description “master code” this is a 4 digit programmable code between 0000 and 9999 used for gaining access to the program mode. The factory default is “ 1 2 5 1”. “relay a latch card” this is a user programmable card(s) used to lo...
Page 8
Page 8 american access systems / security brands, inc. Master reset follow these steps precisely. If you make an entry error, the unit will error and you will have to start over. (1). Disconnect power from the master board (2). Reconnect power to the board while holding down the reset button (3). Re...
Page 9: Programming
Page 9 american access systems / security brands, inc. Programming a person desiring access to the program mode will enter the present master code. If the master code is valid the yellow led will come on and the individual will be prompted with a quickbeep to enter a 3 digit number corresponding to ...
Page 10
Page 10 american access systems / security brands, inc. Group 100 (programming codes) “100” submode 100 (program access cards) (block format) helpful hint: page 18 in this manual is an access card log sheet which may be photo-copied for keeping track of all cards in the system. Description: access c...
Page 11
Page 11 american access systems / security brands, inc. “103” submode 103 (program latch a card(s)) (block format) description: the latch a card(s) is used to toggle the output state of relay a. In most cases this card will be used to hold a gate or door open. This card is accepted into the system f...
Page 12: Group 200 (Deleting Cards)
Page 12 american access systems / security brands, inc. “108” submode 108 (program master code) description: the master code is used to gain access to the program mode. The factory default master code is 1251. The master code is only accepted into the system from the master unit. The master code can...
Page 13: Group 300 (Miscellaneous)
Page 13 american access systems / security brands, inc. “quick delete mode” description: quick delete mode is another way to delete individual access cards from the system. The factory default quick delete master code is 1 2 5 3. (to change the quick delete master code see sub-mode 110. To delete ac...
Page 14
Page 14 american access systems / security brands, inc. “303” submode 303 (set clock date) description: the prox 2000 ii unit incorporates an on board 365 day a year calendar and also adjusts for leap year. Years can be entered up to 2025. To set the clock date enter the 4 digit “master code” follow...
Page 15
Page 15 american access systems / security brands, inc. “309” submode 309 (quiet mode) note: from the factory, quiet mode is enabled. Description: if you want to hear the good or bad beeps at your desk when an access code is entered at the slave keypad you can disable the quiet mode. This sub-mode c...
Page 16
Page 16 american access systems / security brands, inc. “404” submode 404 (red printing on invalid codes) this option is only available if you are using an aas idp562 citizen printer. The option will print out every invalid code in red. This feature is disabled by default. To toggle this feature on ...
Page 17
Page 17 american access systems / security brands, inc. Access name.
Page 18: Master Board
Page 18 american access systems / security brands, inc. Connection for 12 volt bulb reset button master board connector for communications and relays board printer power transformer plug-in communications and relays board see page 6 wiegand color codes for slave interface.
Page 19: 1675 West Yale Ave.
Page 19 american access systems / security brands, inc. Customer service and tech support customer service: 303-799-9757 customer service is available free of charge. Hours are 8:00 a.M. To 4:30 p.M. Mst. If you call, please have your model and serial number to help our technicians assist you. E-mai...
Page 20: Your “
Your “ partner” in access control www.Securitybrandsinc.Com security brands inc.