1. DL manuals
  2. Aastra
  3. IP Phone
  4. 53i IP Phone
  5. Administrator's Manual

Aastra 53i IP Phone Administrator's Manual

Other manuals for 53i IP Phone: Release Note, User Manual, Installation Manual, User Manual
Manual is about: SIP IP PHONE Administrator Guide Release 2.0

Summary of 53i IP Phone

  • Page 1

    Administrator guide release 2.0 si sip i ip phone phone 53i, 55i, 57i, 57i c 53i, 55i, 57i, 57i ct 41-001160-00 rev 01.

  • Page 2

    Aastra telecom will not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use. While every effort has been made to ensure accuracy, aastra telecom will not be liable for technical or editorial errors or omissions contained within this docum...

  • Page 3: Software License Agreement

    41-001160-00, rev 01 release 2.0 iii software license agreement aastra telecom inc., hereinafter known as "seller", grants to customer a personal, worldwide, non-transferable, non-sublicenseable and non-exclusive, restricted use license to use software in object form solely with the equipment for wh...

  • Page 5: Contents

    41-001160-00, rev 01 release 2.0 v contents contents preface about this guide ...............................................................................................................Xiii . Introduction ..............................................................................................

  • Page 6: Contents

    Vi 41-001160-00, rev 01 release 2.0 contents http/https support .............................................................................................2-7 . Using https via the aastra web ui .......................................................................2-9 . Accessing the aastra web u...

  • Page 7: Contents

    41-001160-00, rev 01 release 2.0 vii contents configuration server protocol ......................................................................................4-13 . Configuring the configuration server protocol .......................................................4-13 . Advanced network settin...

  • Page 8: Contents

    Viii 41-001160-00, rev 01 release 2.0 contents call forwarding ......................................................................................................5-90 . Callers list .............................................................................................................5-96 ....

  • Page 9: Contents

    41-001160-00, rev 01 release 2.0 ix contents chapter 8 firmware upgrade . About this chapter ...........................................................................................................8-1 . Upgrading the firmware ..........................................................................

  • Page 10: Contents

    X 41-001160-00, rev 01 release 2.0 contents type of service (tos)/dscp settings ................................................................... A-27 . Time server settings ............................................................................................. A-28 . Time and date settings ...

  • Page 11: Contents

    41-001160-00, rev 01 release 2.0 xi contents handset feature key settings for the 57i ct ..................................................... A-126 . Expansion module key settings for 536m (53i/55i) and 560m (57i/57i ct) .................................................................................

  • Page 12: Contents

    Xii 41-001160-00, rev 01 release 2.0 contents appendix e sample blf softkey settings . About this appendix ....................................................................................................... E-1 . Sample blf softkey settings ..........................................................

  • Page 13: Preface

    41-001160-00, rev 01 release 2.0 xiii preface preface about this guide introduction this sip ip phone administrator guide provides information on the basic network setup, operation, and maintenance of the ip phones, models 53i, 55i, 57i, and 57i cordless (57i ct). It also includes details on the fun...

  • Page 14: Preface

    About this guide xiv 41-001160-00, rev 01 release 2.0 ip phone administrator guide preface other documentation the ip phone documentation consists of: • sip ip phone installation guide – contains installation and set-up instructions, information on general features and functions, and basic options l...

  • Page 15: Preface

    41-001160-00, rev 01 release 2.0 xv preface chapters and appendixes in this guide this guide contains the following chapters and appendixes: for go to an overview of the ip phone firmware installation information chapter 1 ip phone interface methods chapter 2 administrator option information chapter...

  • Page 17: Overview

    41-001160-00, rev 01 release 2.0 1-1 overview chapter 1 overview about this chapter introduction this chapter briefly describes the ip phone models, and provides information about installing the ip phone firmware. It also describes the firmware and configuration files that the ip phone models use fo...

  • Page 18: Overview

    Ip phone models 1-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide overview ip phone models description the ip phone models 53i, 55i, 57i, and 57i ct communicate over an ip network allowing you to receive and place calls in the same manner as a regular business telephone. All phone mo...

  • Page 19: Overview

    Ip phone models 41-001160-00, rev 01 release 2.0 1-3 overview overview the following illustration shows ip phone optional accessories for the 55i, 57i, and 57i ct ip phones. The 536em module adds 36 additional softkeys to the ip phone models 55i, 57i, and 57i ct. The 536em provides paper labels for ...

  • Page 20: Overview

    Firmware installation information 1-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide overview firmware installation information description the firmware setup and installation for the ip phone can be done using any of the following: • phone keypad menu (phone ui) • aastra web-based us...

  • Page 21: Overview

    Firmware installation information 41-001160-00, rev 01 release 2.0 1-5 overview overview installation requirements the following are general requirements for setting up and using your sip ip phone: • a sip-based ip pbx system or network installed and running with a number created for the new ip phon...

  • Page 22: Overview

    Firmware installation information 1-6 41-001160-00, rev 01 release 2.0 ip phone administrator guide overview configuration server requirement a basic requirement for setting up the ip phone is to have a configuration server. The configuration server allows you to: • store the firmware images that yo...

  • Page 23: Overview

    Firmware and configuration files 41-001160-00, rev 01 release 2.0 1-7 overview overview firmware and configuration files description when the ip phone is initialized for the first time, dhcp is enabled by default. Depending on the type of configuration server setup you may have, the ip phone may dow...

  • Page 24: Overview

    Firmware and configuration files 1-8 41-001160-00, rev 01 release 2.0 ip phone administrator guide overview configuration file precedence aastra ip phones can accept two sources of configuration data: • the server configuration most recently downloaded/cached from the configuration server files, aas...

  • Page 25: Overview

    Firmware and configuration files 41-001160-00, rev 01 release 2.0 1-9 overview overview references for setting up and configuring the ip phone using either the ip phone ui, the aastra web ui, or the configuration files, see chapter 4, “network configuration of the ip phones.” for information about t...

  • Page 27: Chapter 2

    41-001160-00, rev 01 release 2.0 2-1 configuration interface methods chapter 2 configuration interface methods about this chapter introduction this chapter describes the methods you can use to configure the ip phones.. Topics this chapter covers the following topics: note: features, characteristics,...

  • Page 28: Ip Phone Ui

    Ip phone ui 2-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuration interface methods ip phone ui the ip phone user interface (ui) provides an easy way to access features and functions for using and configuring the ip phone. You can use the following hardkeys to perform speci...

  • Page 29

    Ip phone ui 41-001160-00, rev 01 release 2.0 2-3 configuration interface methods configuration interface methods by default, specific softkeys/programmable keys on each phone model can also access the directory list and callers list, and initiate transfers and conference calls. Reference for more in...

  • Page 30: Options Key

    Ip phone ui 2-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuration interface methods options key the options key allows you to access the "options list" on the ip phone. Accessible options in this list are for both user and administrator use. An administrator must enter a pa...

  • Page 31

    Ip phone ui 41-001160-00, rev 01 release 2.0 2-5 configuration interface methods configuration interface methods the following illustration indicates the location of the options key on each phone model. 53i 55i 57i/57i ct 57i ct handset options key options key.

  • Page 32

    Ip phone ui 2-6 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuration interface methods using the options key from the 53i, 55i, or 57i/57i ct: from the 57i ct handset: step action 1 press on the phone to enter the options list. 2 use the r and s to scroll through the list of o...

  • Page 33: Aastra Web Ui

    Aastra web ui 41-001160-00, rev 01 release 2.0 2-7 configuration interface methods configuration interface methods aastra web ui description an administrator can setup and configure the ip phone using the aastra web ui. The aastra web ui supports internet explorer and gecko engine-based browsers lik...

  • Page 34

    Aastra web ui 2-8 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuration interface methods http/https client and server support the aastra ip phones allow for http request processing and associated data transfers to perform over a secure connection (https). The ip phones support...

  • Page 35

    Aastra web ui 41-001160-00, rev 01 release 2.0 2-9 configuration interface methods configuration interface methods using https via the aastra web ui https is enabled by default on the ip phones. When you open a browser window and enter an ip address or host name for a phone using http, a server redi...

  • Page 36: Accessing The Aastra Web Ui

    Accessing the aastra web ui use the following procedure to access the aastra web ui. Step action 1 open your web browser and enter the phone’s ip address or host name into the address field. If the browser is using http, the following redirect screen displays, followed by the “security alert” window...

  • Page 37

    Aastra web ui 41-001160-00, rev 01 release 2.0 2-11 configuration interface methods configuration interface methods the following illustration is an example of a network status screen for the 55i ip phone. The following categories display in the side menu of the aastra web ui: status, operation, bas...

  • Page 38: Status

    Aastra web ui 2-12 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuration interface methods status the status section displays the network status and the mac address of the ip phone. It also displays hardware and firmware information about the ip phone. The information in the ne...

  • Page 39: Basic Settings

    Aastra web ui 41-001160-00, rev 01 release 2.0 2-13 configuration interface methods configuration interface methods basic settings the basic settings section provides the following options: advanced settings the advanced settings section provides the following options: heading description preference...

  • Page 40

    Aastra web ui 2-14 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuration interface methods enabling/disabling the aastra web ui the aastra web ui is enabled by default on the ip phones. A system administrator can disable the aastra web ui on a single phone or on all phones if r...

  • Page 41: Administrator Options

    41-001160-00, rev 01 release 2.0 3-1 administrator options chapter 3 administrator options about this chapter introduction the ip phones provide specific options on the ip phone ui that allow an administrator to change or set features and configuration information as required. For all models, you ca...

  • Page 42: Administrator Options

    About this chapter 3-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide administrator options configuration server settings page 3-23 firmware update features page 3-25 topic page.

  • Page 43: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-3 administrator options administrator options administrator level options description there are specific options available only to an administrator on the ip phones. For the ip phone ui, you can access the administrator options via the “...

  • Page 44: Administrator Options

    Administrator level options 3-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide administrator options aastra web ui options the following are administrator options in the aastra web ui: • restore to factory defaults • basic settings (local dial plan, dial planterminator, digit timeout,...

  • Page 45: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-5 administrator options administrator options using the configuration files when you use the configuration files to configure the ip phones, you must use a text-based editing application to open the configuration file (aastra.Cfg or .Cfg...

  • Page 46: Administrator Options

    Administrator level options 3-6 41-001160-00, rev 01 release 2.0 ip phone administrator guide administrator options phone status the phone status on the ip phone displays the network status and firmware version of the ip phone. This option also allows you to restart the phone, and set the phone to f...

  • Page 47: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-7 administrator options administrator options • network port 1 (53i) displays the ip address on port 1 of the phone. • network port 2 (53i) displays the ip address on port 2 of the phone. • network status (55i, 57i, and 57i ct) displays ...

  • Page 48: Administrator Options

    Administrator level options 3-8 41-001160-00, rev 01 release 2.0 ip phone administrator guide administrator options phone status via aastra web ui in the aastra web ui, the "network attributes", "hardware information", and "firmware information" options are read only and available for viewing by the...

  • Page 49: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-9 administrator options administrator options • factory default feature a user and administrator can restart the phone at operation->reset->phone. However, only an administrator has access to restoring factory defaults to the ip phone at...

  • Page 50

    Basic preferences (aastra web ui) an administrator can configure the following basic preferences using the aastra web ui: • general preferences — local dial plan a dial plan that describes the number and pattern of digits that a user dials to reach a particular telephone number. — dial plan terminat...

  • Page 51: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-11 administrator options administrator options • incoming/outgoing intercom calls specifies whether the ip phone or the server is responsible for notifying the recipient that an intercom call is being placed. Also specifies the prefix co...

  • Page 52: Administrator Options

    Administrator level options 3-12 41-001160-00, rev 01 release 2.0 ip phone administrator guide administrator options network the following paragraphs describe the network parameters you can configure on the ip phone. Network settings are in two categories: • basic network settings • advanced network...

  • Page 53: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-13 administrator options administrator options • primary dns primary domain name service. A service that translates domain names into ip addresses. To assign static dns addresses, disable dhcp. • secondary dns secondary domain name servi...

  • Page 54: Administrator Options

    Administrator level options 3-14 41-001160-00, rev 01 release 2.0 ip phone administrator guide administrator options • ntp time servers enables or disables the time server. This parameter affects time server1, time server2, and time server3. Valid values are 0 (enable) and 1 (disable). Default is 1 ...

  • Page 55: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-15 administrator options administrator options sip settings the following paragraphs describe the sip parameters you can configure on the ip phone. Sip configuration consists of configuring: • basic sip authentication settings • basic si...

  • Page 56: Administrator Options

    Administrator level options 3-16 41-001160-00, rev 01 release 2.0 ip phone administrator guide administrator options • password password used to register the ip phone with the sip proxy. Valid values are up to 20 alphanumeric characters. Passwords are encrypted and display as asterisks when entering...

  • Page 57: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-17 administrator options administrator options • outbound proxy port the proxy port on the proxy server to which the ip phone sends all sip messages. Default is 0. Configurable on a global and per-line basis. • registrar server (registra...

  • Page 58: Administrator Options

    Administrator level options 3-18 41-001160-00, rev 01 release 2.0 ip phone administrator guide administrator options • explicit mwi subscription period the requested duration, in seconds, before the mwi subscription times out. The phone re-subscribes to mwi before the subscription period ends. • sen...

  • Page 59: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-19 administrator options administrator options • registration renewal timer the length of time, in seconds, prior to expiration, that the phone renews registrations. • blf subscription period specifies the time period, in seconds, that t...

  • Page 60: Administrator Options

    Administrator level options 3-20 41-001160-00, rev 01 release 2.0 ip phone administrator guide administrator options line settings an administrator can configure multiple lines on the ip phone with the same sip network configuration (global) or a different sip network configuration (per-line). The f...

  • Page 61: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-21 administrator options administrator options softkeys/programmable keys a user or administrator can assign a line to a specific softkey or programmable key (53i has programmable keys only). The available softkeys also depend on the ip ...

  • Page 62

    The functions you can configure are: • none • line • speeddial • do not disturb • blf • blf/list • xml • flash • sprecode • park • pickup • last call return • directory • callers list • intercom • services • empty references for information about configuring softkeys, see chapter 5, the section, “so...

  • Page 63: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-23 administrator options administrator options configuration server settings the configuration server stores the firmware images, configuration files, and software when performing software upgrades to the ip phone. An administrator can c...

  • Page 64: Administrator Options

    Administrator level options 3-24 41-001160-00, rev 01 release 2.0 ip phone administrator guide administrator options • mode (not configurable via ip phone ui). Enables and disables the ip phone to be updated automatically (auto-resync) once a day at a specific time in a 24-hour period. Updating can ...

  • Page 65: Administrator Options

    Administrator level options 41-001160-00, rev 01 release 2.0 3-25 administrator options administrator options firmware update features the ip phone uses a tftp, ftp, http, or https server (depending on the protocol configured on the ip phone) to download configuration files and firmware. You can dow...

  • Page 66: Administrator Options

    Administrator level options 3-26 41-001160-00, rev 01 release 2.0 ip phone administrator guide administrator options.

  • Page 67: Configuring The Ip Phones

    41-001160-00, rev 01 release 2.0 4-1 configuring the ip phones chapter 4 network configuration of the ip phones about this chapter introduction this chapter provides the information required to configure the administrative options on the ip phones. It includes procedures for configuring via the conf...

  • Page 68: Configuring The Ip Phones

    About this chapter 4-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones universal plug and play (upnp) (for remote phones) page 4-28 virtual lan (optional) page 4-31 type of service (tos), quality of service (qos), and diffserv qos page 4-32 network time server...

  • Page 69: Configuring The Ip Phones

    Overview 41-001160-00, rev 01 release 2.0 4-3 network configuration of the ip phones configuring the ip phones overview an administrator can configure the ip phone network and sip options from the phone ui, from the aastra web ui, or the configuration files. Administrator level options are password ...

  • Page 70: Configuring The Ip Phones

    Basic network settings 4-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones basic network settings this section describes the basic network settings on the ip phone which include configuring for: • dhcp • ip address (of phone) • subnet mask (of phone) • gateway...

  • Page 71: Configuring The Ip Phones

    Basic network settings 41-001160-00, rev 01 release 2.0 4-5 network configuration of the ip phones configuring the ip phones the network administrator chooses which of these parameters (if any) are supplied to the ip phone by the dhcp server. The administrator must configure the phone manually to pr...

  • Page 72: Configuring The Ip Phones

    Basic network settings 4-6 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->basic network settings. 2 enable the "dhcp" field by checking the check box. (disable this field by unchecking the box...

  • Page 73: Configuring The Ip Phones

    Basic network settings 41-001160-00, rev 01 release 2.0 4-7 network configuration of the ip phones configuring the ip phones configuring network settings manually if you disable dhcp on your phone, you need to configure the following network settings manually: • ip address • subnet mask • gateway • ...

  • Page 74: Configuring The Ip Phones

    Basic network settings 4-8 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->basic network settings. 2 enter an ip address of the phone in the ip address field. 3 enter a subnet mask in the subne...

  • Page 75: Configuring The Ip Phones

    Basic network settings 41-001160-00, rev 01 release 2.0 4-9 network configuration of the ip phones configuring the ip phones configuring ethernet ports 0 and 1 negotiation ethernet is the computer networking technology for local area networks (lans). You use the ethernet ports to connect to a lan us...

  • Page 76

    Full-duplex (10mbps or 100mbps) full-duplex data transmission means that data can be transmitted in both directions on a signal carrier at the same time. For example, on a lan with a technology that has full-duplex transmission, one device can be sending data on the line while another device is rece...

  • Page 77: Configuring The Ip Phones

    Basic network settings 41-001160-00, rev 01 release 2.0 4-11 network configuration of the ip phones configuring the ip phones 6 select a negotiation method to use on port 1and press set. Valid values are: • autonegotiation • fullduplex 10mbps • fullduplex 100mbps • halfduplex 10mbps • halfduplex 100...

  • Page 78: Configuring The Ip Phones

    Basic network settings 4-12 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones aastra web ui step action 1 click on advanced settings->network->basic network settings. 2 in the “ethernet port 0” field, select a negotiation method to use on port 0. Valid values ar...

  • Page 79: Configuring The Ip Phones

    Configuration server protocol 41-001160-00, rev 01 release 2.0 4-13 network configuration of the ip phones configuring the ip phones configuration server protocol you can download new versions of firmware and confguration files from the configuration server to the ip phone using any of the following...

  • Page 80: Configuring The Ip Phones

    Configuration server protocol 4-14 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones 6 from the network settings menu, select tftp server, ftp server, http server, or https (depending on which protocol you configured in step 4). 7 enter the ip address of the pro...

  • Page 81: Configuring The Ip Phones

    Configuration server protocol 41-001160-00, rev 01 release 2.0 4-15 network configuration of the ip phones configuring the ip phones 7 (cont’d) note: to configure the https security method, http to https redirect, and https server blocking for http xml posts, see the section, “https client/server co...

  • Page 82: Configuring The Ip Phones

    Configuration server protocol 4-16 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones aastra web ui step action 1 click on advanced settings->configuration server..

  • Page 83: Configuring The Ip Phones

    Configuration server protocol 41-001160-00, rev 01 release 2.0 4-17 network configuration of the ip phones configuring the ip phones 2 select the protocol from the "download protocol" list box. The ip phone uses the protocol you select to download new firmware and configuration files from the config...

  • Page 84: Configuring The Ip Phones

    Advanced network settings 4-18 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones advanced network settings you can set advanced network settings on the ip phone such as, network address translation (nat), nortel nat, network time protocol (ntp) time servers, vir...

  • Page 85: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-19 network configuration of the ip phones configuring the ip phones nortel proxy/registrar the phone at ip address 10.10.10.10 is configured to register with the proxy at 63.251.195.10. Because it is a nortel proxy, the configuration must ...

  • Page 86: Configuring The Ip Phones

    Advanced network settings 4-20 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones nortel networks nat nortel networks provides a proprietary solution to support connectivity to their proxies from phones placed behind devices (such as routers or firewalls) that us...

  • Page 87: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-21 network configuration of the ip phones configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->advanced network settings. 2 select yes (enable) or no (disable) in the "nortel nat traversal enabled" f...

  • Page 88: Configuring The Ip Phones

    Advanced network settings 4-22 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones configuring nat address and port (optional) you can also configure a specific nat address and port on the ip phone using the configuration files, ip phone ui, or aastra web ui. Conf...

  • Page 89: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-23 network configuration of the ip phones configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->advanced network settings. 2 enter a nat ip address in the "nat ip" field. 3 enter a nat port in the "na...

  • Page 90: Configuring The Ip Phones

    Advanced network settings 4-24 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones https client/server configuration https is a web protocol that encrypts and decrypts user page requests as well as the pages that are returned by the web server. Https uses secure s...

  • Page 91: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-25 network configuration of the ip phones configuring the ip phones configuring https client and server settings use the following procedures to configure the https client and server for the ip phones. Note: to enable or disable tbe ip pho...

  • Page 92: Configuring The Ip Phones

    Advanced network settings 4-26 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->advanced network settings . 2 select an https client method to use from the https client method field. Valid value...

  • Page 93: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-27 network configuration of the ip phones configuring the ip phones 5 click to save your settings. Note: the session prompts you to restart the ip phone to apply the configuration settings. 6 select operation->reset and click .. Aastra web...

  • Page 94: Configuring The Ip Phones

    Advanced network settings 4-28 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones universal plug and play (upnp) (for remote phones) upnp is a standard that uses internet protocols to enable devices to be plugged into a network and automatically know about each o...

  • Page 95: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-29 network configuration of the ip phones configuring the ip phones configuring upnp (optional) use the following procedures to configure upnp on the ip phones. Configuration files for specific parameters you can set in the configuration f...

  • Page 96: Configuring The Ip Phones

    Advanced network settings 4-30 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->advanced network settings . 2 in the upnp field, place a check in the “enabled” box to turn on upnp. Note: to manu...

  • Page 97: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-31 network configuration of the ip phones configuring the ip phones virtual lan (optional) virtual local area network (vlan) is a feature on the ip phone that allows for multiple logical ethernet interfaces to send outgoing rtp packets ove...

  • Page 98: Configuring The Ip Phones

    Advanced network settings 4-32 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones type of service (tos), quality of service (qos), and diffserv qos tos is an octet as a field in the standard ip header. It is used to classify the traffic of the different qoss. Qos...

  • Page 99: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-33 network configuration of the ip phones configuring the ip phones dscp range/vlan priority mapping dscp bits in the tos field of the ip header are set for rtp, rtcp, and sip packets using either the default values or the values configure...

  • Page 100: Configuring The Ip Phones

    Advanced network settings 4-34 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones dscp range/vlan priority the following table identifies the default dscp of protocols. Configuring type of service (tos)/dscp (optional) use the following procedures to configure to...

  • Page 101: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-35 network configuration of the ip phones configuring the ip phones ip phone ui step action 1 press on the phone to enter the options list. 2 select network. 3 select type of service. 4 select sip, rtp, and/or rtcp and enter a value from 0...

  • Page 102: Configuring The Ip Phones

    Advanced network settings 4-36 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones . Configuring vlan (optional) use the following procedures to configure vlan on the ip phone. Aastra web ui step action 1 click on advanced settings->network->type of service,dscp ....

  • Page 103: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-37 network configuration of the ip phones configuring the ip phones configuration files for specific parameters you can set in the configuration files, see appendix a, the section, “network address translation (nat) settings” on page a-18....

  • Page 104: Configuring The Ip Phones

    Advanced network settings 4-38 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones 19 select vlan id and enter a value from 1 to 4094 to specify the vlan id of port 1. 20 press done to save the change. 21 select priority. 22 select a vlan priority value from 0 to ...

  • Page 105: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-39 network configuration of the ip phones configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->vlan. To globally enable/disable vlan and set priority for non-ip packets: 2 enable vlan by checking the...

  • Page 106: Configuring The Ip Phones

    Advanced network settings 4-40 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones 8 click to save your changes. Note: the session prompts you to restart the ip phone to apply the configuration settings. 9 select operation->reset and click .. Aastra web ui step ac...

  • Page 107: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-41 network configuration of the ip phones configuring the ip phones network time servers network time protocol (ntp) is a protocol that the ip phone uses to synchronize the phone clock time with a computer (configuration server) in the net...

  • Page 108: Configuring The Ip Phones

    Advanced network settings 4-42 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones use the following procedure to enable/disable and configure the ntp servers using the aastra web ui.. Aastra web ui step action 1 click on advanced settings->network->advanced netwo...

  • Page 109: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-43 network configuration of the ip phones configuring the ip phones session initiation protocol (sip) settings the ip phone uses the information in the session initiation protocol (sip) settings to register at the ip pbx. The ip phone conf...

  • Page 110: Configuring The Ip Phones

    Advanced network settings 4-44 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones sip per-line parameters specific sets of sip parameters are inter-dependent with each other. To prevent conflicting parameter values from being applied, per-line values always take ...

  • Page 111: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-45 network configuration of the ip phones configuring the ip phones sip precedence example the following example shows the sip proxy feature and example schema for storage and parsing of the sip configuration parameters. The following sip ...

  • Page 112: Configuring The Ip Phones

    Advanced network settings 4-46 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones backup proxy/registrar support the ip phones support a backup sip proxy and backup sip registrar feature. If the primary server is unavailable, the phone automatically swtiches to t...

  • Page 113: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-47 network configuration of the ip phones configuring the ip phones you can configure srv lookup using the configuration files (aastra.Cfg and .Cfg) only. The parameters to use are: • sip proxy ip • sip proxy port configuring basic sip set...

  • Page 114: Configuring The Ip Phones

    Advanced network settings 4-48 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones ip phone ui step action 1 press on the phone to enter the options list. 2 select sip settings. 3 select proxy server (or proxy ip for 57i/57i ct) and enter an ip address or fully qu...

  • Page 115: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-49 network configuration of the ip phones configuring the ip phones . Aastra web ui step action 1 for global configuration, click on advanced settings->global sip->basic sip settings..

  • Page 116: Configuring The Ip Phones

    Advanced network settings 4-50 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones or, for per-line configuration, click on advanced settings->line n (1-9) . To configure sip authentication settings: 2 in the "screen name" field, enter the screen name that display...

  • Page 117: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-51 network configuration of the ip phones configuring the ip phones 8 in the "line mode" field, select "generic" for normal mode, "broadsoft sca" for a broadworks network, or "nortel" for a nortel network. To configure sip network settings...

  • Page 118: Configuring The Ip Phones

    Advanced network settings 4-52 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones 19 in the "registration period" field, enter the requested registration period, in seconds, from the registrar. 20 click to save your changes. Aastra web ui step action.

  • Page 119: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-53 network configuration of the ip phones configuring the ip phones configuring advanced sip settings (optional) using the configuration files or the aastra web ui, you can set more advanced sip settings on the ip phone such as: refer to a...

  • Page 120: Configuring The Ip Phones

    Advanced network settings 4-54 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->global sip->advanced sip settings. 2 enable the "explicit mwi subscription" field by checking the check box. (disable this ...

  • Page 121: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-55 network configuration of the ip phones configuring the ip phones 6 in the "timer 1 and timer 2" fields, enter a time, in milliseconds, that will apply to an ip phone session. These timers are sip transaction layer timers defined in rfc ...

  • Page 122: Configuring The Ip Phones

    Advanced network settings 4-56 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones real-time transport protocol (rtp) settings real-time transport protocol (rtp) is used as the bearer path for voice packets sent over the ip network. Information in the rtp header t...

  • Page 123: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-57 network configuration of the ip phones configuring the ip phones aastra ip phones support the international telecommunications union (itu) transmission standards for the following codecs: • waveform codecs: g.711 pulse code modulation (...

  • Page 124: Configuring The Ip Phones

    Advanced network settings 4-58 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones customized codec preference list you can also configure the ip phones to use preferred codecs. To do this, you must enter the payload value (payload), the packetization time in mill...

  • Page 125: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-59 network configuration of the ip phones configuring the ip phones out-of-band dtmf the ip phones support out-of-band dual-tone multifrequency (dtmf) mode according to rfc2833. In the aastra web ui, you can enable or disable this feature ...

  • Page 126: Configuring The Ip Phones

    Advanced network settings 4-60 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones configuring rtp features use the following procedures to configure rtp, basic codecs, customized codecs, dtmf, and silence suppression on the ip phone. Configuration files for speci...

  • Page 127: Configuring The Ip Phones

    Advanced network settings 41-001160-00, rev 01 release 2.0 4-61 network configuration of the ip phones configuring the ip phones . Aastra web ui step action 1 click on advanced settings->global sip->rtp settings. 2 enter an rtp port base in the rtp port field. Default is 3000. 3 enable the "basic co...

  • Page 128: Configuring The Ip Phones

    Advanced network settings 4-62 41-001160-00, rev 01 release 2.0 ip phone administrator guide configuring the ip phones 5 enter a "customized codec preference list" which all payload=8;ptime=10; silsupp=on; payload=0;ptime=10; silsupp=off valid values are: 6 iselect a method to use from the dtmf meth...

  • Page 129: Chapter 5

    41-001160-00, rev 01 release 2.0 5-1 operational ip phone features chapter 5 operational ip phone features about this chapter introduction the ip phones have specific operational features you can configure to customize your ip phone. This chapter describes each feature and provides procedures for co...

  • Page 130

    About this chapter 5-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features directed call pickup (blf or xml call interception) page 5-50 do not disturb (dnd) page 5-65 bridged line appearance (bla) (57i/57i ct/53i only) page 5-67 park calls/pick up parked call...

  • Page 131: Operational Features

    Operational features 41-001160-00, rev 01 release 2.0 5-3 operational ip phone features operational ip phone features operational features description the ip phone has the following operational features: feature description user passwords allows you to change user passwords on the ip phone. Administ...

  • Page 132

    Operational features 5-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features do not disturb (dnd) key setting that allows you to set the phone to "do not disturb". Bridged line appearance (bla) (55i, 57i, 57i ct only) allows you to assign a phone number to lin...

  • Page 133

    Operational features 41-001160-00, rev 01 release 2.0 5-5 operational ip phone features operational ip phone features the following paragraphs describe each of these features. Priority alerting allows you to enable or disable priority alert settings. Priority alerting allows incoming calls to trigge...

  • Page 134: User Passwords

    Operational features 5-6 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features user passwords a user or an administrator can change the user passwords on the phone using the configuration files, the ip phone ui, or the aastra web ui. Use the following procedures...

  • Page 135

    Operational features 41-001160-00, rev 01 release 2.0 5-7 operational ip phone features operational ip phone features aastra web ui 1 click on operation->user password. 2 in the "current password" field, enter the current user password. 3 in the "new password" field, enter the new user password. 4 i...

  • Page 136: Administrator Passwords

    Operational features 5-8 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features administrator passwords an administrator can change the administrator passwords on the phone using the configuration files only. An administrator can also assign a password for using ...

  • Page 137

    Operational features 41-001160-00, rev 01 release 2.0 5-9 operational ip phone features operational ip phone features locking and unlocking the phone a user or administrator can lock a phone to prevent the phone from being used or configured. You can lock the phone using the ip phone ui or the aastr...

  • Page 138

    Aastra web ui 1 click on operation->phone lock. Lock the phone: 2 in the “lock the phone?” field, click . The phone locks dyanamically and displays the following message: “phone is locked”. Unlock the phone: 3 click on operation->phone lock. 4 in the “unlock the phone?” field, click . The phone unlo...

  • Page 139

    Operational features 41-001160-00, rev 01 release 2.0 5-11 operational ip phone features operational ip phone features resetting a user password if a user forgets his password, either the user or an administrator can reset it so a new password can be entered. The reset user password feature resets t...

  • Page 140

    Operational features 5-12 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features defining an emergency dial plan public telephone networks in countries around the world have a single emergency telephone number (emergency services number), that allows a caller to ...

  • Page 141

    Operational features 41-001160-00, rev 01 release 2.0 5-13 operational ip phone features operational ip phone features you can set the emergency dial plan via the configuration files or the aastra web ui. Use the following procedures to specify the numbers to use on your phone for dialing emergency ...

  • Page 142: Time and Date

    Operational features 5-14 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features time and date in addition to enabling/disabling the time server, you can also set the time and date, set the time and date format, set the time zone, and set daylight savings time on...

  • Page 143

    Operational features 41-001160-00, rev 01 release 2.0 5-15 operational ip phone features operational ip phone features 2 select time and date. 3 select set time. 4 using the keys on the keypad, enter a time to set on the ip phone. 5 press done to save the time you entered. 6 select time format. Vali...

  • Page 144

    Operational features 5-16 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 17 selecta time zone from the list of options. For valid values, see appendix a, the section, “time and date settings” on page a-30. Note: the default time zone is us-eastern. 18 pre...

  • Page 145

    Operational features 41-001160-00, rev 01 release 2.0 5-17 operational ip phone features operational ip phone features 3 in the “date format” field, select the date format you want to use on your phone. Valid values are: • www mmm dd (default) • dd-mmm-yy • yyyy-mm-dd • dd/mm/yyyy • dd/mm/yy • dd-mm...

  • Page 146: Hard Keys

    Operational features 5-18 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features hard keys there are hard keys on your phone, such as hold, redial, xfer, and conf that are configured by default for specific call-handling features. (see the product-specific user g...

  • Page 147

    Operational features 41-001160-00, rev 01 release 2.0 5-19 operational ip phone features operational ip phone features use the following procedure to enable/disable the redial, xfer, and conf keys. Mapping redial and conf keys as speedials you can map the redial and conference keys on the ip phone t...

  • Page 148

    Operational features 5-20 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features using redial key for “last number redial” the ip phones have an enhanced redial user interface that allows a user to quickly redial the last number that was dialed out from the phone...

  • Page 149

    Operational features 41-001160-00, rev 01 release 2.0 5-21 operational ip phone features operational ip phone features softkeys/programmable keys/feature keys you can configure the softkeys and programmable keys (53i has programmable keys only) to perform specific functions on the ip phones. Softkey...

  • Page 150

    Operational features 5-22 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features available configuration functions on the softkeys include: • none - indicates softkey is disabled (option for web ui only). • line - indicates softkey is configured for line use. • s...

  • Page 151

    Operational features 41-001160-00, rev 01 release 2.0 5-23 operational ip phone features operational ip phone features • last call return- indicates the softkey is set to be used as a “last call return” key. (for more information on lcr, see the section last call return (lcr) (sylantro servers only)...

  • Page 152

    Operational features 5-24 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features state-based softkeys (55i, 57i, 57i ct only) users and administrators can configure a specific state to display when a softkey is being used. Available states you can configure for e...

  • Page 153

    Operational features 41-001160-00, rev 01 release 2.0 5-25 operational ip phone features operational ip phone features you can enable or disable the softkey states using the configuration files or the aastra web ui. In the aastra web ui, you disable a state by unchecking the box for that operational...

  • Page 154

    Operational features 5-26 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features configuration example the following example illustrates the use of the "softkeyn states" parameter, and the "softkeyn type" parameter with a value of empty. For clarity purposes, onl...

  • Page 155

    Operational features 41-001160-00, rev 01 release 2.0 5-27 operational ip phone features operational ip phone features programmable keys (53i, 55i) the following table provides the number of softkeys and programmable keys you can configure, and the number of lines available for each type of phone. *...

  • Page 156

    Operational features 5-28 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features configuring softkeys and programmable keys use the following procedures to configure the softkeys and programmable keys on the ip phone. Configuration files for specific parameters y...

  • Page 157

    Operational features 41-001160-00, rev 01 release 2.0 5-29 operational ip phone features operational ip phone features for models with programmable keys: click on operation->programmable keys. 53i screen 55i, 57i, 57i ct screens aastra web ui.

  • Page 158

    Operational features 5-30 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 2 for softkeys, in the "type" field, select the type of softkey you want to configure. For programmable keys, in the “hard key” field, select the hard key type you want to configure....

  • Page 159

    Operational features 41-001160-00, rev 01 release 2.0 5-31 operational ip phone features operational ip phone features 57i cordless (ct) feature keys in addition to the softkeys on the 57i ct, this phone also has handset keys you can configure with specific features. You can use the aastra web ui to...

  • Page 160

    Operational features 5-32 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features feature key programming guidelines the following are guidelines to use when programming the feature keys on the handset: • all handsets paired with the same base station have the sam...

  • Page 161

    Operational features 41-001160-00, rev 01 release 2.0 5-33 operational ip phone features operational ip phone features configuring handset feature keys you can program up to 15 feature keys on the 57i ct ip phone using the configuration files or the aastra web ui. Use the following procedure to prog...

  • Page 162

    Operational features 5-34 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 3 click on operation->handset keys. 4 select the handset key you want to program. 5 select the function for that handset key from the "key function" field. 6 click to save the functi...

  • Page 163: Locking Ip Phone Keys

    Operational features 41-001160-00, rev 01 release 2.0 5-35 operational ip phone features operational ip phone features locking ip phone keys the ip phones allow you to lock or unlock programmable keys, softkeys, hard keys, cordless handset keys, and expansion keys (for expansion modules). When key l...

  • Page 164

    Operational features 5-36 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features locking the ip phone keys use the following procedures to lock the softkeys and programmable keys on the ip phone. Configuration files for specific parameters you can set in the conf...

  • Page 165: Suppressing Dtmf Playback

    Operational features 41-001160-00, rev 01 release 2.0 5-37 operational ip phone features operational ip phone features suppressing dtmf playback a feature on the ip phones allows users and administrators to enable or disable the suppression of dtmf playback when a number is dialed from the softkeys ...

  • Page 166

    Operational features 5-38 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->preferences->general. 2 enable the "suppress dtmf playback" field by checking the check box. (disable this field by unchecking the box). Defa...

  • Page 167: Display Dtmf Digits

    Operational features 41-001160-00, rev 01 release 2.0 5-39 operational ip phone features operational ip phone features display dtmf digits a feature on the ip phones allows users and administrators to enable or disable dtmf (dual-tone multi-frequency) digits to display to the ip phone when using the...

  • Page 168

    Operational features 5-40 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->preferences->general. 2 enable the "display dtmf digits" field by checking the check box. (disable this field by unchecking the box). Default...

  • Page 169: Busy Lamp Field (Blf)

    Operational features 41-001160-00, rev 01 release 2.0 5-41 operational ip phone features operational ip phone features busy lamp field (blf) the blf feature on the ip phones allows a specific extension to be monitored for state changes. Blf monitors the status (busy or idle) of extensions on the ip ...

  • Page 170

    Operational features 5-42 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features blf\list setting (for use with the broadsoft broadworks rel 13 or higher platform only) the blf\list feature on the ip phones is specifically designed to support the broadsoft broadw...

  • Page 171

    Operational features 41-001160-00, rev 01 release 2.0 5-43 operational ip phone features operational ip phone features asterisk blf configuration you can enable the blf feature on asterisk to enable monitoring for specific extensions. Blf on asterisk is possible through the “hint” extension paramete...

  • Page 172

    Operational features 5-44 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features configuring blfs use the following procedures to configure blf and blf\list on the ip phone. Configuration files to set blf or blf\list in the configuration files, see appendix a, th...

  • Page 173

    Operational features 41-001160-00, rev 01 release 2.0 5-45 operational ip phone features operational ip phone features 2 on the 55i: click on operation->softkeys and xml or on operation->programmable keys. Note: you can configure up to 20 softkeys and up to 6 programmable keys on the 55i. Aastra web...

  • Page 174

    Operational features 5-46 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 3 on the 57i/57ict: click on operation->softkeys and xml and select the “bottom keys” tab or the “top keys” tab. Note: you can configure up to 20 bottom softkeys and up to 10 top sof...

  • Page 175

    Operational features 41-001160-00, rev 01 release 2.0 5-47 operational ip phone features operational ip phone features 4 select a softkey or programmable key to configure. 5 in the "type" field, select "blf" (asterisk), "blf\list" (broadsoft broadworks). 6 for the 55i, 57i, and 57i ct softkeys: in t...

  • Page 176: Blf Subscription Period

    Operational features 5-48 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features blf subscription period on the ip phones, you can set the time period, in seconds, that the ip phone resubscribes the blf subscription service after a software/firmware upgrade or af...

  • Page 177

    Operational features 41-001160-00, rev 01 release 2.0 5-49 operational ip phone features operational ip phone features aastra web ui 1 click on advanced settings->global sip->advanced sip settings. 2 enter a value, in seconds, from 120 (2 min) to 3600 (1 hour) in the "blf subscription period" field....

  • Page 178

    Operational features 5-50 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features directed call pickup (blf or xml call interception) directed call pickup is a feature on the phones that allows a user to intercept a call on a ringing phone which is part of the sam...

  • Page 179

    Operational features 41-001160-00, rev 01 release 2.0 5-51 operational ip phone features operational ip phone features blf and xml softkeys/programmable keys monitor the states of an extension. The extension states can be one of three states: "busy", "ringing" and "idle". If the monitored extension ...

  • Page 180

    Operational features 5-52 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features enabling/disabling directed call pickup use the following procedure to enable or disable the directed call pickup feature on the ip phone. Configuration files to enable/disable direc...

  • Page 181

    Operational features 41-001160-00, rev 01 release 2.0 5-53 operational ip phone features operational ip phone features configuring blf/blf list for directed call pickup use the following procedure to configure blf/blf list for directed call pickup in the configuration files. 4 click to save your cha...

  • Page 182

    Operational features 5-54 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features use the following procedure to configure blf or blf/list for directed call pickup in the aastra web ui. Aastra web ui 1 click on basic settings->preferences->directed call pickup set...

  • Page 183

    Operational features 41-001160-00, rev 01 release 2.0 5-55 operational ip phone features operational ip phone features 4 on the 53i: click on operation->programmable keys. Note: you can configure up to 4 programmable keys on the 53i. Keys 1 and 2 are reserved for the “save” and “delete” functions, r...

  • Page 184

    Operational features 5-56 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 5 on the 55i: click on operation->softkeys and xml or on operation->programmable keys. Note: you can configure up to 20 softkeys and up to 6 programmable keys on the 55i. Aastra web ...

  • Page 185

    Operational features 41-001160-00, rev 01 release 2.0 5-57 operational ip phone features operational ip phone features 6 on the 57i/57ict: click on operation->softkeys and xml and select the “bottom keys” tab or the “top keys” tab. Note: you can configure up to 20 bottom softkeys and up to 10 top so...

  • Page 186

    Operational features 5-58 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 7 select a softkey or programmable key to configure. 8 in the "type" field, select "blf" (asterisk), "blf\list" (broadsoft broadworks). 9 for the 55i, 57i, and 57i ct softkeys: in th...

  • Page 187

    Operational features 41-001160-00, rev 01 release 2.0 5-59 operational ip phone features operational ip phone features configuring xml for directed call pickup use the following procedure to configure xml for directed call pickup in the configuration files. Notes: 1. Before implementing this procedu...

  • Page 188

    Operational features 5-60 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features use the following procedure to configure xml for directed call pickup in the aastra web ui. Aastra web ui 1 click on basic settings->preferences->directed call pickup settings. 2 ena...

  • Page 189

    Operational features 41-001160-00, rev 01 release 2.0 5-61 operational ip phone features operational ip phone features 4 on the 53i: click on operation->programmable keys. Note: you can configure up to 6 programmable keys on the 53i. Aastra web ui.

  • Page 190

    Operational features 5-62 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 5 on the 55i: click on operation->softkeys and xml or on operation->programmable keys. Note: you can configure up to 20 softkeys and up to 6 programmable keys on the 55i. Aastra web ...

  • Page 191

    Operational features 41-001160-00, rev 01 release 2.0 5-63 operational ip phone features operational ip phone features 6 on the 57i/57ict: click on operation->softkeys and xml and select the “bottom keys” tab or the “top keys” tab. Note: you can configure up to 20 bottom softkeys and up to 10 top so...

  • Page 192

    Operational features 5-64 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 7 select a softkey or programmable key to configure. 8 in the "type" field, select "xml”.. 9 for the 55i, 57i, and 57i ct softkeys: in the "label" field, enter the name of the person...

  • Page 193: Do Not Disturb (Dnd)

    Operational features 41-001160-00, rev 01 release 2.0 5-65 operational ip phone features operational ip phone features do not disturb (dnd) the ip phones have a feature you can enable called "do not disturb (dnd). You can configure dnd on softkeys and programmable keys using the aastra web ui or the...

  • Page 194

    Operational features 5-66 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features aastra web ui 1 click on operation->programmable keys. 2 select a hard key to configure. 3 in the "type" field, select "do not disturb". Note: you do not need to set the "value" for ...

  • Page 195

    Operational features 41-001160-00, rev 01 release 2.0 5-67 operational ip phone features operational ip phone features bridged line appearance (bla) (57i/57i ct/53i only) a sip bridge line appearance (bla) on the ip phones allows multiple devices to share a single directory address (da). For example...

  • Page 196

    Operational features 5-68 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features the following table shows the number of lines that can be set to bla for each model phone. Configuring bla you can configure bla on a global or per-line basis using the configuration...

  • Page 197

    Operational features 41-001160-00, rev 01 release 2.0 5-69 operational ip phone features operational ip phone features per-line bla you configure bla on a per-line basis in the configuration files using the following parameters: sip linen mode sip linen username sip linen bla number you configure bl...

  • Page 198

    Operational features 5-70 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features for inin server when configuring the bla feature on an inin server, the value set for the sip linen bla number parameter shall be the same value set for the sip linen user name param...

  • Page 199

    Operational features 41-001160-00, rev 01 release 2.0 5-71 operational ip phone features operational ip phone features aastra web ui 1 for global configuration of bla: click on advanced settings->global sip->basic sip authentication settings..

  • Page 200

    Operational features 5-72 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features for per-line configuration of bla: click on advanced settings->line n (1-9). In the "line mode" field, select the bla option. 2 in the "phone number" field, enter the phone number of...

  • Page 201

    Operational features 41-001160-00, rev 01 release 2.0 5-73 operational ip phone features operational ip phone features using a bla line on the ip phone if you have either a global or per-line bla configuration, and you want to share a call on the line with a bla group, you need to press the hold but...

  • Page 202

    Operational features 5-74 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features park/pickup static configuration (57i/57i ct only) you can configure a static configuration for parking and picking up a call using the aastra web ui at basic settings-> preferences....

  • Page 203

    Operational features 41-001160-00, rev 01 release 2.0 5-75 operational ip phone features operational ip phone features configuring park /pickup using static configuration (57i/57i ct only) use the following procedure to configure the park/pickup call feature using the static configuration method. No...

  • Page 204

    Operational features 5-76 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features park/pickup programmable configuration the programmable method of configuration creates park and pickup softkeys or programmable keys that you can configure on the ip phones (53i, 55...

  • Page 205

    Operational features 41-001160-00, rev 01 release 2.0 5-77 operational ip phone features operational ip phone features on 57i/57i ct on the ip phone ui, the park/pickup feature displays the following: • when a call comes in, and you pickup the handset, the custom label that you configured for the pa...

  • Page 206

    Operational features 5-78 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features programmable configuration using configuration files in the configuration files, you configure park/pickup using the softkey parameters. You must specify the"softkeyn value" and "prg...

  • Page 207

    Operational features 41-001160-00, rev 01 release 2.0 5-79 operational ip phone features operational ip phone features model 53i examples use the following procedure to configure the park/pickup call feature using the programmable configuration method and the configuration files. Programmable config...

  • Page 208

    Operational features 5-80 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features for example, if line 1 and line 6 are configured for park, the 57i ct handset uses the configuration set for line 1 to park a call. On the 53i, you configure a park and/or pickup key...

  • Page 209

    Operational features 41-001160-00, rev 01 release 2.0 5-81 operational ip phone features operational ip phone features 5 in the "value" field, enter the approriate value based on the server in your network. Note: for values to enter in this field, see the table “park/pickup call server configuration...

  • Page 210

    Operational features 5-82 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 1 click on operation->handset keys. 2 pick a handset key to configure for parking a call. 3 in the "key function" field, select park. 4 pick another handset key to configure for pick...

  • Page 211

    Operational features 41-001160-00, rev 01 release 2.0 5-83 operational ip phone features operational ip phone features 1 click on operation->programmable keys. 53i screen 2 pick a hard key to configure for parking a call. 3 in the "hard key" field, select park. 4 in the "value" field, enter the appr...

  • Page 212

    Operational features 5-84 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 11 click on operation->reset. 12 in the "restart phone" field click to restart the ip phone and apply the changes. Aastra web ui.

  • Page 213

    Operational features 41-001160-00, rev 01 release 2.0 5-85 operational ip phone features operational ip phone features using the park call/pickup parked call feature use the following procedures on the ip phones to park a call and pick up a parked call. Ip phone ui step action parking a call 1 while...

  • Page 214

    Operational features 5-86 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features last call return (lcr) (sylantro servers only) last call return (lcr) allows an administrator or user to configure a "last call return" function on a softkey or programmable key. Thi...

  • Page 215

    Operational features 41-001160-00, rev 01 release 2.0 5-87 operational ip phone features operational ip phone features aastra web ui for the 57i/57i ct: 1 click on operation->softkeys and xml. 2 pick a softkey to configure for last call return. 3 in the "type" field, select lcr. 4 in the "line" fiel...

  • Page 216

    Operational features 5-88 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features for the 57i ct handset: 1 click on operation->handset keys. 2 pick a handset key to configure for last call return. 3 in the "key function" field, select lcr. 4 click to save your ch...

  • Page 217

    Operational features 41-001160-00, rev 01 release 2.0 5-89 operational ip phone features operational ip phone features for the 53i 1 click on operation->programmable keys. 53i screen 2 pick a hard key to configure for last call return. 3 in the "type" field, select lcr. 4 for the 53i: in the "line" ...

  • Page 218: Call Forwarding

    Operational features 5-90 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features call forwarding the call forwarding feature on the ip phone allows incoming calls to be forwarded to another destination. The phone sends the sip message to the sip proxy, which then...

  • Page 219

    Operational features 41-001160-00, rev 01 release 2.0 5-91 operational ip phone features operational ip phone features the following table shows the ip phone model and the number of lines for which you can configure call forwarding. Enabling/disabling the ability to configure call forwarding using t...

  • Page 220

    Operational features 5-92 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features configuration method for call forwarding the method you use to configure call forwarding depends on the model phone you are configuring. You can set the phone-wide call forward setti...

  • Page 221

    Operational features 41-001160-00, rev 01 release 2.0 5-93 operational ip phone features operational ip phone features 4 for 53i: in the “cfwd mode” field, enter the mode that you want to set on your phones. For 55i/57i/57i ct: in the “mode” field, enter the mode that you want to set on your phones....

  • Page 222

    Operational features 5-94 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->call forward. For global configuration of call fowarding: 2 in the "mode" field, select the mode you want to set on your phone. Valid modes a...

  • Page 223

    Operational features 41-001160-00, rev 01 release 2.0 5-95 operational ip phone features operational ip phone features 4 in the "number of rings" field, enter the number of rings you want your phone to ring before the call is forwarded. Valid values are 1 to 9. Note: "number of rings" field applies ...

  • Page 224: Callers List

    Operational features 5-96 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features callers list the ip phones have a "callers list" feature that store the name, phone number, and incremental calls, for each call received by the phone. The following illustraton show...

  • Page 225

    Operational features 41-001160-00, rev 01 release 2.0 5-97 operational ip phone features operational ip phone features when you download the callers list, the phone stores the callerlist.Csv file to your computer in comma-separated value (csv) format. You can use any spreadsheet application to open ...

  • Page 226

    Operational features 5-98 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features enabling/disabling callers list you can enable and disable user access to the callers list on the ip phones using the following parameter in the configuration files: • callers list d...

  • Page 227

    Operational features 41-001160-00, rev 01 release 2.0 5-99 operational ip phone features operational ip phone features 5 to save a line item to a programmable key for speeddialing, press the 3 save softkey and enter the line number at the "save to?" prompt that is already configured for speeddialing...

  • Page 228

    Operational features 5-100 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features downloading the callers list use the following procedure to download the callers list using the aastra web ui. Aastra web ui 1 click on operation->directory. 2 in the callers list f...

  • Page 229: Missed Calls Indicator

    Operational features 41-001160-00, rev 01 release 2.0 5-101 operational ip phone features operational ip phone features missed calls indicator the ip phone has a "missed calls" indicator that increments the number of missed calls to the phone. This feature is accessible from the ip phone ui only. Yo...

  • Page 230

    Operational features 5-102 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features accessing and clearing missed calls use the following procedure to access and clear missed calls from the callers list. Once you display the callers list, the " new calls" indicator...

  • Page 231: Directory List

    Operational features 41-001160-00, rev 01 release 2.0 5-103 operational ip phone features operational ip phone features directory list the ip phones have a "directory list" feature that allows you to store frequently used names and numbers on the phone. You can also dial directly from the directory ...

  • Page 232

    Operational features 5-104 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features you can also sort multiple numbers according to preference and perform a quick-search feature that allows you to enter the first letter that corresponds to a name in the directory t...

  • Page 233

    Operational features 41-001160-00, rev 01 release 2.0 5-105 operational ip phone features operational ip phone features • you can use any spreadsheet application to open the file for viewing. The following is an example of a directory list in a spreadsheet application. This is an administrator and u...

  • Page 234

    Operational features 5-106 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features enabling/disabling directory list you can enable and disable user access to the directory list on the ip phones using the following parameter in the configuration files: • directory...

  • Page 235

    Operational features 41-001160-00, rev 01 release 2.0 5-107 operational ip phone features operational ip phone features server to ip phone download you can populate your ip phone directory list with server directory files. To activate this feature, you need to add the following parameters to the con...

  • Page 236

    Operational features 5-108 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features server to ip phone download behavior the software that reads directory files from the server, loads the file’s contents into the phone's nvram when the phone is booting. Directory e...

  • Page 237

    Operational features 41-001160-00, rev 01 release 2.0 5-109 operational ip phone features operational ip phone features using the directory list use the following procedures to access and use the directory list. Ip phone ui step action for the 53i: 1 press the services key on the phone to display th...

  • Page 238

    Operational features 5-110 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 3 to delete all entries in the directory list, press the deletelist softkey at the "directory list" header. To delete a line item from the directory list, select the line item you w...

  • Page 239

    Operational features 41-001160-00, rev 01 release 2.0 5-111 operational ip phone features operational ip phone features downloading from the server to the ip phone you can use the configuration files to download the directory list from the configuration server to the ip phone.. Use the following pro...

  • Page 240

    Operational features 5-112 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features use the following procedure to configure the download. Aastra web ui 1 click on operation->directory. 2 in the directory list field, click on . A “file download” message displays. 3...

  • Page 241

    Operational features 41-001160-00, rev 01 release 2.0 5-113 operational ip phone features operational ip phone features voicemail (55i, 57i, and 57i ct only) the voicemail feature on the 55i, 57i and 57i ct ip phones allow you to configure lines with phone numbers so the phone can dial out to connec...

  • Page 242

    Operational features 5-114 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features you can enter up to 9 voicemail numbers associated with each of the 9 lines on the phone. For example: sip line1 vmail: *97 sip line2 vmail: *95 use the following procedure to confi...

  • Page 243

    Operational features 41-001160-00, rev 01 release 2.0 5-115 operational ip phone features operational ip phone features using voicemail (57i57i ct only) use the following procedure to access and use voicemail. Ip phone ui step action for the 57i/57i ct: 1 press x on the phone to display the services...

  • Page 244: Xml Customized Services

    Operational features 5-116 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features xml customized services extensible markup language (xml) is a markup language much like html. Html was designed to display data and to focus on how data looks. Xml was designed to d...

  • Page 245

    Operational features 41-001160-00, rev 01 release 2.0 5-117 operational ip phone features operational ip phone features for a description and implementation of each xml object, see appendix g, “creating an xml application.” aastraipphonedirectory (for directory list screen) creates an online directo...

  • Page 246

    Operational features 5-118 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features you can also use the following attributes/options with the xml objects to further customize your xml applications: attribute/option description/usage valid values beep enables or di...

  • Page 247

    Operational features 41-001160-00, rev 01 release 2.0 5-119 operational ip phone features operational ip phone features enabling/disabling a beep for status message displays you can enable or disable a beep option using the status message object (aastraipphonestatus), the configuration files, or the...

  • Page 248

    Operational features 5-120 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features scroll delay option for status messages the ip phones support a scroll delay option that allows you to set the time delay, in seconds, between the scrolling of each status message o...

  • Page 249

    Operational features 41-001160-00, rev 01 release 2.0 5-121 operational ip phone features operational ip phone features configuring the phone to use xml you can configure the phone to request the xml objects you create by configuring specific parameters via the configuration files or the aastra web ...

  • Page 250

    Operational features 5-122 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features example configuration of xml application the following example shows the parameters you enter in the configuration files to configure an xml application: xml application uri: http:/...

  • Page 251

    Operational features 41-001160-00, rev 01 release 2.0 5-123 operational ip phone features operational ip phone features aastra web ui for the 57i/57i ct: 1 click on operation->softkeys and xml. 2 select a key from keys 1 through 20. 3 in the "type" field, select xml from the list box. 4 in the "labe...

  • Page 252

    Operational features 5-124 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 8 click to save your changes. The xml application is applied to the ip phone immediately. When the xml application is pushed to the phone via an http post, a host ip address or doma...

  • Page 253

    Operational features 41-001160-00, rev 01 release 2.0 5-125 operational ip phone features operational ip phone features aastra web ui for the 53i 1 click on operation->programmable keys. 53i screen 2 for the 53i, select a key from keys 3 through 6. 3 in the "hard key" field, select xml from the list...

  • Page 254

    Operational features 5-126 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features using the xml customized service after you create, save, and configure the ip phone with an xml application, the customized service is ready for you to use. 6 click on advanced sett...

  • Page 255

    Operational features 41-001160-00, rev 01 release 2.0 5-127 operational ip phone features operational ip phone features use the following procedure to use the xml feature on the ip phone. Ip phone ui step action for the 55i/57i/57i ct: 1 press the services key on the phone to display the services me...

  • Page 256

    Operational features 5-128 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features xml action uris the ip phones have a feature that allows an administrator to specify a uniform resource identifier (uri) that triggers a get when certain events occur. The ip phone ...

  • Page 257

    Operational features 41-001160-00, rev 01 release 2.0 5-129 operational ip phone features operational ip phone features the following table identifies the configurable action uri parameters in the configuration files and the aastra web ui. This table also identifies the variables that apply to speci...

  • Page 258

    Operational features 5-130 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features http://10.50.10.140/outgoing.Pl?Number=5551212 you can configure this feature via the configuration files or the aastra web ui. Configuring xml action uris use the following procedu...

  • Page 259

    Operational features 41-001160-00, rev 01 release 2.0 5-131 operational ip phone features operational ip phone features aastra web ui 1 click on advanced settings->action uri. 2 enter an xml uri for a startup event in the “startup” field. For example: http://10.50.10.140/startup this parameter pecif...

  • Page 260

    Operational features 5-132 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 4 enter an xml uri for an incoming call event in the “incoming call” field. For example: http://10.50.10.140/incoming.Php?Number=$$remotenumber$$ this parameter pecifies the uri for...

  • Page 261

    Operational features 41-001160-00, rev 01 release 2.0 5-133 operational ip phone features operational ip phone features xml softkey uri in addition to specifying variables for the action uris, you can also specify variables in the xml softkey uris that are bound when the key is pressed. These variab...

  • Page 262

    Operational features 5-134 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features configuring xml softkey uris use the following procedures to configure xml softkey uris using the configuration files or the aastra web ui. Configuration files for specific paramete...

  • Page 263

    Operational features 41-001160-00, rev 01 release 2.0 5-135 operational ip phone features operational ip phone features 3 in the "type" field, select xml from the list box. 4 in the "label" field, enter a label that displays on the ip phone for the xml softkey. For example, "aastra". 5 in the "value...

  • Page 264

    Operational features 5-136 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features aastra web ui for the 53i: 1 click on operation->programmable keys. 53i screen 2 on the 53i, select a key from keys 1 through 6. 3 in the "type" field, select xml from the list box....

  • Page 265: Sip Local Dial Plan

    Operational features 41-001160-00, rev 01 release 2.0 5-137 operational ip phone features operational ip phone features sip local dial plan a dial plan describes the number and pattern of digits that a user dials to reach a particular telephone number. Access codes, area codes, specialized codes, an...

  • Page 267

    Operational features 41-001160-00, rev 01 release 2.0 5-139 operational ip phone features operational ip phone features example if you enter the following dial string for a local dial plan: sip dial plan: 1+#,9 where “9” is the prepended digit, and you dial the following number: 15551212 the ip phon...

  • Page 268

    Operational features 5-140 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features configuring the sip local dial plan use the following procedures to configure the sip local dial plan using the configuration files or the aastra web ui. Configuration files for spe...

  • Page 269

    Operational features 41-001160-00, rev 01 release 2.0 5-141 operational ip phone features operational ip phone features 5 click to save your changes. You must restart your ip phone for the changes to take affect. 6 click on operation->reset. 7 in the "restart phone" field click to restart the ip pho...

  • Page 270

    Operational features 5-142 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features incoming/outgoing intercom with auto-answer the intercom feature allows you to press the configured intercom button on the ip phone and then enter the number you want to call to ini...

  • Page 271

    Operational features 41-001160-00, rev 01 release 2.0 5-143 operational ip phone features operational ip phone features incoming intercom calls on incoming intercom calls, you can enable (turn on) or disable (turn off) the microphone on the ip phone. You can also enable or disable “auto-answer” and ...

  • Page 272

    Operational features 5-144 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features aastra web ui outgoing intercom settings (55i, 57i anc 57i ct only): 1 click on basic settings->preferences->outgoing intercom settings. 2 select an intercom type for outgoing inter...

  • Page 273

    Operational features 41-001160-00, rev 01 release 2.0 5-145 operational ip phone features operational ip phone features incoming intercom settings: 1 click on basic settings->preferences->incoming intercom settings. 2 the "auto-answer" field is enabled by default. The automatic answering feature is ...

  • Page 274

    Operational features 5-146 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features audio transmit and receive gain adjustments the audio gain properties for the ip phone handset, headset, and speakerphone is adjusted to reduce side-tone and echo on the local and f...

  • Page 275

    Operational features 41-001160-00, rev 01 release 2.0 5-147 operational ip phone features operational ip phone features configuring audio transmit and receive gain adjustments you can configure the audio transmit and gain adjustments using the configuration files only. Use the following procedure to...

  • Page 276: Ring Tones and Tone Sets

    Operational features 5-148 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features ring tones and tone sets you can configure ring tones and ring tone sets on the ip phones. Ring tones there are several distinct ring tones a user or administrator can select from t...

  • Page 277

    Operational features 41-001160-00, rev 01 release 2.0 5-149 operational ip phone features operational ip phone features configuration method valid values default value aastra web ui global: tone 1 tone 2 tone 3 tone 4 tone 5 silent per-line: global tone 1 tone 2 tone 3 tone 4 tone 5 silent global: t...

  • Page 278

    Operational features 5-150 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features ring tone sets in addition to ring tones, you can configure ring tone sets on a global-basis on the ip phones. Ring tone sets consist of tones customized for a specific country. The...

  • Page 279

    Operational features 41-001160-00, rev 01 release 2.0 5-151 operational ip phone features operational ip phone features configuring ring tones and tone sets use the following procedures to configure ring tones and tone sets on the ip phones. Configuration files for specific parameters you can set in...

  • Page 280

    Operational features 5-152 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->preferences. For global configuration: 2 in the "ring tones" section, select a country from the "tone set" field. 3 select a value from the ...

  • Page 281: Priority Alerting

    Operational features 41-001160-00, rev 01 release 2.0 5-153 operational ip phone features operational ip phone features priority alerting priority alerting on the ip phones is a feature that allows incoming calls to trigger pre-defined ringing or call waiting alert tones. You can enable or disable p...

  • Page 282

    Operational features 5-154 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features sylantro servers the ring tone keywords that can display in the "alert-info" header for a sylantro server are: when the ring tone keywords appear in an "alert-info" header from a sy...

  • Page 283

    Operational features 41-001160-00, rev 01 release 2.0 5-155 operational ip phone features operational ip phone features if you enable priority alerting when using a sylantro server, you can specify the bellcore tone to be used for the following configurable criteria: ring tone pattern (sylantro serv...

  • Page 284

    Operational features 5-156 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features the following table identifies the different bellcore ring tone patterns and cadences. Bellcore tone pattern id pattern cadence minimum duration (ms) nominal duration (ms) maximum d...

  • Page 285

    Operational features 41-001160-00, rev 01 release 2.0 5-157 operational ip phone features operational ip phone features call waiting tones call waiting is a feature that tells you if a new caller is trying to contact you when you are already on the phone. A discreet tone alerts you to the new caller...

  • Page 286

    Operational features 5-158 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features configuring priority alerting use the following procedures to configure priority alerting on the ip phones. Configuration files for specific parameters you can set in the configurat...

  • Page 287

    Operational features 41-001160-00, rev 01 release 2.0 5-159 operational ip phone features operational ip phone features 3 select a ring tone pattern for each of the following fields: • group • internal • external • emergency • priority • auto call distribution • community-1 • community-2 • community...

  • Page 288: Stuttered Dial Tone

    Operational features 5-160 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features stuttered dial tone you can enable or disable the playing of a stuttered dial tone when there is a message waiting on the ip phone. You can configure this feature using the configur...

  • Page 289

    Operational features 41-001160-00, rev 01 release 2.0 5-161 operational ip phone features operational ip phone features 3 click to save your changes. You must restart your ip phone for the changes to take affect. 4 click on operation->reset. 5 in the "restart phone" field click to restart the ip pho...

  • Page 290: Call Waiting Tone

    Operational features 5-162 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features call waiting tone you can enable or disable the playing of a call waiting tone when a caller is on an active call and a new call comes into the phone. You can configure this feature...

  • Page 291

    Operational features 41-001160-00, rev 01 release 2.0 5-163 operational ip phone features operational ip phone features 3 click to save your changes. You must restart your ip phone for the changes to take affect. 4 click on operation->reset. 5 in the "restart phone" field click to restart the ip pho...

  • Page 292: Language

    Operational features 5-164 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features language the ip phones support several different languages. You can have the ip phone ui and the aastra web ui display in a specific language as required. When you set the language ...

  • Page 293

    Operational features 41-001160-00, rev 01 release 2.0 5-165 operational ip phone features operational ip phone features example the following is an example of the parameters you would enter in the .Cfg file to load a french, italian, german, and spanish language pack to the ip phone. Language 1: lan...

  • Page 294

    Operational features 5-166 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features loading language packs via the aastra web ui using the aastra web ui, you can specify a language pack to load using the parameters at basic settings->preferences->language settings....

  • Page 295

    Operational features 41-001160-00, rev 01 release 2.0 5-167 operational ip phone features operational ip phone features specifying the language to use once the language pack(s) have loaded, you must then specify which language to use on the phone. After the phone has booted up, you can specify which...

  • Page 296

    Operational features 5-168 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features ip phone ui step action 1 press on the phone to enter the options list. 2 select language. 3 select english (english), francais (french), espanol (spanish), deutsch (german), or ita...

  • Page 297

    Operational features 41-001160-00, rev 01 release 2.0 5-169 operational ip phone features operational ip phone features aastra web ui 1 click on basic settings->preferences->language settings. Loading the lanaguage pack 2 in the “language n” fields, enter the file name of the language pack you want ...

  • Page 298

    Operational features 5-170 41-001160-00, rev 01 release 2.0 ip phone administrator guide operational ip phone features 6 after restarting your phone, log back in using the aastra web ui. 7 click on basic settings->preferences->language settings. 8 in the “webpage language” field, select a language t...

  • Page 299: Chapter 6

    41-001160-00, rev 01 release 2.0 6-1 advanced operational features chapter 6 advanced ip phone operational features about this chapter introduction the ip phones have advanced operational features you can configure using the configuration files and/or the aastra web ui. This chapter describes each o...

  • Page 300

    Advanced operational features 6-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide advanced operational features advanced operational features this section provides the following information about advanced features of the ip phones: feature description mac address/line number in registe...

  • Page 301

    Advanced operational features 41-001160-00, rev 01 release 2.0 6-3 advanced ip phone operational features advanced operational features mac address/line number in register messages the ip phones can send the mac address and line number in the register packets making it easier for the call server whe...

  • Page 302

    Advanced operational features 6-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide advanced operational features . Aastra web ui step action 1 click on advanced settings->global sip->advanced sip setting. 2 enable the "send mac address in register message" field by checking the check bo...

  • Page 303

    Advanced operational features 41-001160-00, rev 01 release 2.0 6-5 advanced ip phone operational features advanced operational features sip message sequence for blind transfer the sip message sequence for blind transfer avoids the transfer target having two simultaneous calls. Prior to release 1.4, ...

  • Page 304

    Advanced operational features 6-6 41-001160-00, rev 01 release 2.0 ip phone administrator guide advanced operational features update caller id during a call it is possible for a proxy or call server to update the caller id information that displays on the phone during a call, by modifying the sip co...

  • Page 305: Boot Sequence Recovery Mode

    Advanced operational features 41-001160-00, rev 01 release 2.0 6-7 advanced ip phone operational features advanced operational features boot sequence recovery mode you can force the ip phone into recovery mode by pressing the 1 and # keys during boot up when the logo displays. This feature is enable...

  • Page 306: Auto-Discovery Using Mdns

    Advanced operational features 6-8 41-001160-00, rev 01 release 2.0 ip phone administrator guide advanced operational features auto-discovery using mdns the ip phones can perform an auto-discovery of all servers on a network using mdns. When the ip phone discovers a tftp server, it is automatically c...

  • Page 307

    Advanced operational features 41-001160-00, rev 01 release 2.0 6-9 advanced ip phone operational features advanced operational features single call restriction (57i ct only) on the 57i ct, an administrator can enable or disable a single call restriction between the 57i ct base unit and a call server...

  • Page 308

    Advanced operational features 6-10 41-001160-00, rev 01 release 2.0 ip phone administrator guide advanced operational features aastra web ui step action 1 click on advanced settings->global sip->rtp settings. 2 enable the "two call support" field by checking the check box. (disable this field by unc...

  • Page 309: Encryption and The Ip Phone

    41-001160-00, rev 01 release 2.0 7-1 encryption and the ip phone chapter 7 encryption and the ip phone about this chapter introduction this chapter provides information about encryption on the ip phones and provides methods an administrator can use to store encryped files to a server. Topics this ch...

  • Page 310: Encryption and The Ip Phone

    Encryption and the ip phone 7-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide encryption and the ip phone encryption and the ip phone an encryption feature for the ip phone allows service providers the capability of storing encrypted files on their server to protect against unauthori...

  • Page 311: Encryption and The Ip Phone

    Encryption and the ip phone 41-001160-00, rev 01 release 2.0 7-3 encryption and the ip phone encryption and the ip phone to make changes to the configuration files, the system administrator must decrypt the files, make the changes, and re-encrypt the files. The encrypted files must then be downloade...

  • Page 312: Encryption and The Ip Phone

    Encryption and the ip phone 7-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide encryption and the ip phone examples the following examples illustrate the use of the anacrypt.Exe file. Example 1 encrypt aastra.Cfg into aastra.Tuz using password 1234abcd: c:\> anacrypt aastra.Cfg -p 123...

  • Page 313: Encryption and The Ip Phone

    Encryption and the ip phone 41-001160-00, rev 01 release 2.0 7-5 encryption and the ip phone encryption and the ip phone example 7 use the "-v" variable to display version number. C:\> anacrypt -v the encryption tag format supported by this anacrypt is: tuzo v1.3 rev1 the corresponding ip phone firm...

  • Page 315: Firmware Upgrade

    41-001160-00, rev 01 release 2.0 8-1 firmware upgrade chapter 8 firmware upgrade about this chapter introduction this chapter provides information about upgrading the ip phone firmware. Topics this chapter covers the following topics: topic page upgrading the firmware page 8-2 manual firmware update...

  • Page 316: Firmware Upgrade

    Upgrading the firmware 8-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide firmware upgrade upgrading the firmware the ip phone uses a tftp, ftp, or http server (depending on the protocol configured on the ip phone) to download configuration files and firmware. The configuration server...

  • Page 317: Firmware Upgrade

    Upgrading the firmware 41-001160-00, rev 01 release 2.0 8-3 firmware upgrade firmware upgrade aastra web ui step action 1 click on advanced settings->firmware update. 2 enter the tftp server ip address or qualified domain name in the "tftp server ip" field. 3 enter the firmware file name (.St) that ...

  • Page 318: Firmware Upgrade

    Upgrading the firmware 8-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide firmware upgrade manual firmware and configuration file update restarting the phone forces the phone to check for both firmware and configuration files stored on the configuration server. Warning: do not reset o...

  • Page 319: Firmware Upgrade

    Upgrading the firmware 41-001160-00, rev 01 release 2.0 8-5 firmware upgrade firmware upgrade aastra web ui step action 1 click on operation->reset. 2 click . 3 click ok at the confirmation prompt. The firmware and configuration files download from the configuration server..

  • Page 320: Firmware Upgrade

    Upgrading the firmware 8-6 41-001160-00, rev 01 release 2.0 ip phone administrator guide firmware upgrade automatic update (auto-resync) the auto-resync feature on the ip phones allows an administrator to enable the phone to be updated automatically once a day at a specific time in a 24-hour period ...

  • Page 321: Firmware Upgrade

    Upgrading the firmware 41-001160-00, rev 01 release 2.0 8-7 firmware upgrade firmware upgrade configuring automatic update use the following procedures to configure automatic update of the ip phone firmware, configuration files, or both. Notes: 1. If a user is accessing the aastra web ui, they are n...

  • Page 322: Firmware Upgrade

    Upgrading the firmware 8-8 41-001160-00, rev 01 release 2.0 ip phone administrator guide firmware upgrade aastra web ui step action 1 click on advanced settings->configuration server->auto-resync. 2 select the auto-resync mode from the mode field. Valid values are none, configuration files, firmware...

  • Page 323: Firmware Upgrade

    Upgrading the firmware 41-001160-00, rev 01 release 2.0 8-9 firmware upgrade firmware upgrade reference for more information about setting automatic update on the ip phone, see the "auto resync mode" and "auto resync time" parameters, see appendix a, the section, “configuration server settings” on p...

  • Page 325: Roubleshooting

    About this chapter 41-001160-00, rev 01 release 2.0 9-1 troubleshooting t roubleshooting chapter 9 troubleshooting about this chapter introduction this chapter describes tasks that a system administrator can perform on the ip phones for troubleshooting purposes. It also includes answers to questions...

  • Page 326: Roubleshooting

    Troubleshooting 9-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide t roubleshooting troubleshooting this section describes tasks that a system administrator can perform on the ip phones for troubleshooting purposes. Using the aastra web ui, a system administrator can: • assign an ip a...

  • Page 327: Roubleshooting

    Troubleshooting 41-001160-00, rev 01 release 2.0 9-3 troubleshooting t roubleshooting module settings the aastra ip phones provide blog module support that allows enhanced severity filtering of log calls sent as blog output. The blog, as used on the ip phones, is a an online debugging tool that can ...

  • Page 328: Roubleshooting

    Troubleshooting 9-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide t roubleshooting you can set module debug levels using the configuration files or the aastra web ui. Support information you can save the local and/or server configuration files of the ip phone to the location specifie...

  • Page 329: Roubleshooting

    Troubleshooting 41-001160-00, rev 01 release 2.0 9-5 troubleshooting t roubleshooting performing troubleshooting tasks use the following procedure to perform troubleshooting on the ip phone via the configuration files.. Configuration files for specific parameters you can set in the configuration fil...

  • Page 330: Roubleshooting

    Troubleshooting 9-6 41-001160-00, rev 01 release 2.0 ip phone administrator guide t roubleshooting aastra web ui step action 1 click on advanced settings->troubleshooting. To set log settings: 2 in the "log ip" field, enter the ip address of where you want log files to be stored. 3 in the "log port"...

  • Page 331: Roubleshooting

    Troubleshooting 41-001160-00, rev 01 release 2.0 9-7 troubleshooting t roubleshooting reference for information that describes solutions to most common problems using the ip phones, see the next section, “troubleshooting solutions” on page 9-8. 4 click to save your settings. 5 click on operation->re...

  • Page 332: Roubleshooting

    Troubleshooting solutions 9-8 41-001160-00, rev 01 release 2.0 ip phone administrator guide t roubleshooting troubleshooting solutions description this section describes solutions to some most common problems that can occur while using the ip phones. Why does my phone display “application missing”? ...

  • Page 333: Roubleshooting

    Troubleshooting solutions 41-001160-00, rev 01 release 2.0 9-9 troubleshooting t roubleshooting please ensure that the tftp server is running and accessible on the network. If the firmware file is correctly located on the running tftp server, the phone will locate the file and reload the application...

  • Page 334: Roubleshooting

    Troubleshooting solutions 9-10 41-001160-00, rev 01 release 2.0 ip phone administrator guide t roubleshooting reason: neither of the .Tuz and aastra.Tuz files are present on the configuration server (tftp/ftp/http). Fix: create the encrypted files using anacrypt.Exe and copy them to the configuratio...

  • Page 335: Roubleshooting

    Troubleshooting solutions 41-001160-00, rev 01 release 2.0 9-11 troubleshooting t roubleshooting how do i restart the ip phone? Ip phone ui step action 1 for 53i: press i on the phone to enter the options list. For 55i/57i/57i ct: press on the phone to enter the options list. 2 selectphone status. 3...

  • Page 336: Roubleshooting

    Troubleshooting solutions 9-12 41-001160-00, rev 01 release 2.0 ip phone administrator guide t roubleshooting 2 click .. 3 click ok at the confirmation prompt. Aastra web ui step action.

  • Page 337: Roubleshooting

    Troubleshooting solutions 41-001160-00, rev 01 release 2.0 9-13 troubleshooting t roubleshooting how do i set the ip phone to factory default? Ip phone ui step action 1 for 53i: press i on the phone to enter the options list. For 55i/57i/57i ct: press on the phone to enter the options list. 2 select...

  • Page 338: Roubleshooting

    Troubleshooting solutions 9-14 41-001160-00, rev 01 release 2.0 ip phone administrator guide t roubleshooting 9 for 53i: press #=confirm. For 55i/57i/57i ct: press default. Note: press cancel to cancel the operaiton. 10 press restart when the phone prompts you to restart the phone. Aastra web ui ste...

  • Page 339: Roubleshooting

    Troubleshooting solutions 41-001160-00, rev 01 release 2.0 9-15 troubleshooting t roubleshooting to restore the local configuration file factory defaults only: 4 in the "remove local configuration settings" field, click . This restores all factory defaults to the local configuration file. It removes...

  • Page 340: Roubleshooting

    Troubleshooting solutions 9-16 41-001160-00, rev 01 release 2.0 ip phone administrator guide t roubleshooting how to reset a user’s password? Ip phone ui step action 1 for 53i: press i on the phone to enter the options list. For 55i/57i/57i ct: press on the phone to enter the options list. 2 selectu...

  • Page 341: Roubleshooting

    Troubleshooting solutions 41-001160-00, rev 01 release 2.0 9-17 troubleshooting t roubleshooting 4 in the "confirm password" field, enter the new user password again. 5 click to save your changes. Aastra web ui step action.

  • Page 343: Appendix A

    About this appendix 41-001160-00, rev 01 release 2.0 a-1 configuration parameters appendix a appendix a configuration parameters about this appendix introduction this appendix describes the parameters you can set in the configuration files for the ip phones. The configuration files include and confi...

  • Page 344: Appendix A

    About this appendix a-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a time and date settings page a-30 sip local dial plan settings page a-37 sip basic, global settings page a-40 sip basic, per-line settings page a-48 advanced sip settings page a-58 rtp, codec, dtmf global...

  • Page 345: Appendix A

    About this appendix 41-001160-00, rev 01 release 2.0 a-3 configuration parameters appendix a top softkey settings for 57i and 57i ct page a-121 handset feature key settings for the 57i ct page a-126 expansion module key settings for 536m (53i/55i) and 560m (57i/57i ct) page a-128 locking softkeys an...

  • Page 346: Appendix A

    Setting parameters in configuration files a-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a setting parameters in configuration files you can set specific configuration parameters in the configuration files for configuring you ip phone. The aastra.Cfg and .Cfg files are st...

  • Page 347: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-5 configuration parameters appendix a operational, basic, and advanced parameters the following sections provide the configuration parameters you can configure on the ip phone. Each parameter table includes the name of th...

  • Page 348: Appendix A

    Operational, basic, and advanced parameters a-6 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – subnet mask subnet mask (in web ui) ip phone ui options->network settings aastra web ui advanced settings->network-> basic network settings configuration files aastra....

  • Page 349: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-7 configuration parameters appendix a parameter – dns2 secondary dns (in web ui) ip phone ui options->network settings aastra web ui advanced settings->network-> basic network settings configuration files aastra.Cfg, .Cfg...

  • Page 350: Appendix A

    Operational, basic, and advanced parameters a-8 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a password settings parameter – ethernet port 1 ethernet port 1 (in web ui) aastra web ui advanced settings->network-> basic network settings configuration files aastra.Cfg, .Cfg de...

  • Page 351: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-9 configuration parameters appendix a emergency dial plan settings parameter – emergency dial plan configuration files aastra.Cfg, .Cfg aastra web ui operation->phone lock description allows you to specify an emergency nu...

  • Page 352: Appendix A

    Operational, basic, and advanced parameters a-10 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a aastra web ui settings parameter – options password enabled configuration files aastra.Cfg, .Cfg description enables or disables password protection of the options key on the ip ...

  • Page 353: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-11 configuration parameters appendix a configuration server settings parameter – download protocol download protocol (in web ui) ip phone ui options->network settings aastra web ui advanced settings->configuration server ...

  • Page 354: Appendix A

    Operational, basic, and advanced parameters a-12 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – alternate tftp server alternate tftp (in web ui) ip phone ui options->network settings->tftp server-> alernate tftp aastra web ui advanced settings->configuration ser...

  • Page 355: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-13 configuration parameters appendix a parameter – ftp server ftp server (in web ui) ip phone ui options->network settings->ftp server aastra web ui advanced settings->configuration server configuration files aastra.Cfg, ...

  • Page 356: Appendix A

    Operational, basic, and advanced parameters a-14 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – http server http server (in web ui) ip phone ui options->network settings->http server aastra web ui advanced settings->configuration server configuration files aastr...

  • Page 357: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-15 configuration parameters appendix a parameter – https server https server (in web ui) ip phone ui options->network settings->https-> https client->download server aastra web ui advanced settings->configuration server c...

  • Page 358: Appendix A

    Operational, basic, and advanced parameters a-16 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – auto resync mode mode (in web ui) aastra web ui advanced settings->configuration server-> auto-resync configuration files aastra.Cfg, .Cfg description enables and dis...

  • Page 359: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-17 configuration parameters appendix a parameter – auto resync time time (24-hour) (in web ui) aastra web ui advanced settings->configuration server-> auto-resync configuration files aastra.Cfg, .Cfg description sets the ...

  • Page 360: Appendix A

    Operational, basic, and advanced parameters a-18 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a network address translation (nat) settings parameter – sip nat ip nat ip (in web ui) ip phone ui options->sip settings aastra web ui advanced settings->network configuration file...

  • Page 361: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-19 configuration parameters appendix a parameter – sip nortel nat timer nortel nat timer (in web ui) aastra web ui advanced settings->network configuration files aastra.Cfg, .Cfg description the interval, in seconds, that...

  • Page 362: Appendix A

    Operational, basic, and advanced parameters a-20 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a https client and server settings parameter – https client method https client method (in web ui) ip phone ui options->network settings->https->https client aastra web ui advanced...

  • Page 363: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-21 configuration parameters appendix a parameter – https block http post xml https server - block xml http posts (in web ui) ip phone ui options->network settings->https-> https server->xml aastra web ui advanced settings...

  • Page 364: Appendix A

    Operational, basic, and advanced parameters a-22 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a upnp settings parameter – upnp manager upnp (in web ui) ip phone ui options->network settings->upnp aastra web ui advanced settings->network-> advanced network settings configura...

  • Page 365: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-23 configuration parameters appendix a parameter – sip nat rtp port rtp port base (in ip phone ui) nat rtp port (in web ui) ip phone ui options->sip settings->rtp port base aastra web ui advanced settings->network-> advan...

  • Page 366: Appendix A

    Operational, basic, and advanced parameters a-24 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a virtual local area network (vlan) settings parameter – tagging enabled vlan enable (in web ui) ip phone ui options->network settings->vlan->vlan enable aastra web ui advanced set...

  • Page 367: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-25 configuration parameters appendix a the following table identifies the default dscp-to-priority mapping structure. Parameter – tos priority map sip priority rtp priority rtcp priority (for port 0 in web ui) ip phone ui...

  • Page 368: Appendix A

    Operational, basic, and advanced parameters a-26 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – priority non-ip priority, non-ip packet (in web ui) ip phone ui options->network settings->vlan->phone-> priority->other aastra web ui advanced settings->network->vla...

  • Page 369: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-27 configuration parameters appendix a type of service (tos)/dscp settings parameter – tos sip ip phone ui options->network settings-> type of service->sip aastra web ui advanced settings->network-> type of service,dscp c...

  • Page 370: Appendix A

    Operational, basic, and advanced parameters a-28 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a time server settings parameter – time server disabled ntp time servers (in web ui) aastra web ui advanced settings->network-> advanced network settings configuration files aastra...

  • Page 371: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-29 configuration parameters appendix a parameter – time server2 time server 2 (in web ui) aastra web ui advanced settings->network-> advanced network settings configuration files aastra.Cfg, .Cfg description the secondary...

  • Page 372: Appendix A

    Operational, basic, and advanced parameters a-30 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a time and date settings parameter – time format time format (in phone ui) ip phone ui options->time and date->time format configuration files aastra.Cfg, .Cfg description this par...

  • Page 373: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-31 configuration parameters appendix a parameter – dst config daylight savings (in phone ui) ip phone ui options->time and date->daylight savings configuration files aastra.Cfg, .Cfg description enables/disables the use o...

  • Page 374: Appendix A

    Operational, basic, and advanced parameters a-32 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a time zone name/time zone code table time zone name time zone code ad-andorra ag-antigua ai-anguilla al-tirane an-curacao ar-buenos aires as-pago pago at-vienna au-lord howe au-ta...

  • Page 375: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-33 configuration parameters appendix a ca-newfoundland ca-atlantic ca-eastern ca-saskatchewan ca-central ca-mountain ca-pacific ca-yukon ch-zurich ck-rarotonga cl-santiago cl-easter cn-china co-bogota cr-costa rica cu-hav...

  • Page 376: Appendix A

    Operational, basic, and advanced parameters a-34 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a hk-hong kong hn-tegucigalpa hr-zagreb ht-port-au-prince hu-budapest hks cst cet est cet ie-dublin is-reykjavik it-rome gmt gmt cet jm-jamaica jp-tokyo est jst ky-cayman est lc-st...

  • Page 377: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-35 configuration parameters appendix a pa-panama pe-lima pl-warsaw pr-puerto rico pt-lisbon pt-madeira pt-azores py-asuncion est pes cet ast wet wet azo pys ro-bucharest ru-kaliningrad ru-moscow ru-samara ru-yekaterinburg...

  • Page 378: Appendix A

    Operational, basic, and advanced parameters a-36 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a va-vatican cet yu-belgrade cet time zone name time zone code.

  • Page 379: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-37 configuration parameters appendix a sip local dial plan settings ) parameter – displayname1 idle display name 1 (in web ui) aastra web ui basic settings->preferences configuration files aastra.Cfg, .Cfg description the...

  • Page 380: Appendix A

    Operational, basic, and advanced parameters a-38 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – sip dial plan local dial plan (in web ui) aastra web ui basic settings->preferences configuration files aastra.Cfg, .Cfg description a dial plan describes the number ...

  • Page 381: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-39 configuration parameters appendix a parameter – sip dial plan terminator send dial plan terminator (in web ui) aastra web ui basic settings->preferences configuration files aastra.Cfg, .Cfg description the ip phone all...

  • Page 382: Appendix A

    Operational, basic, and advanced parameters a-40 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a sip basic, global settings sip global authentication settings parameter – sip screen name screen name (in web ui) ip phone ui options->sip settings aastra web ui advanced setting...

  • Page 383: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-41 configuration parameters appendix a parameter – sip display name caller id (in web ui) ip phone ui options->sip settings aastra web ui advanced settings->global sip-> basic sip settings configuration files aastra.Cfg, ...

  • Page 384: Appendix A

    Operational, basic, and advanced parameters a-42 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – sip bla number bla number (in web ui) aastra web ui advanced settings->global sip-> basic sip settings configuration files aastra.Cfg, .Cfg description allows you to ...

  • Page 385: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-43 configuration parameters appendix a sip global network settings. Parameter – sip proxy ip proxy server (in web ui) ip phone ui options->sip settings aastra web ui advanced settings->global sip-> basic sip settings conf...

  • Page 386: Appendix A

    Operational, basic, and advanced parameters a-44 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – sip backup proxy ip backup proxy server (in web ui) aastra web ui advanced settings->global sip-> basic sip network settings configuration files aastra.Cfg, .Cfg desc...

  • Page 387: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-45 configuration parameters appendix a parameter – sip outbound proxy port outbound proxy port (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration files aastra.Cfg, .Cfg descripti...

  • Page 388: Appendix A

    Operational, basic, and advanced parameters a-46 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – sip registrar port registrar port (in web ui) ip phone ui options->sip settings aastra web ui advanced settings->global sip-> basic sip settings configuration files a...

  • Page 389: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-47 configuration parameters appendix a parameter – sip backup registrar port backup registrar port (in web ui) aastra web ui advanced settings->global sip-> basic sip network settings configuration files aastra.Cfg, .Cfg ...

  • Page 390: Appendix A

    Operational, basic, and advanced parameters a-48 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a sip basic, per-line settings the following parameters are sip per-line settings. The value of "n" is 1 - 9 for 53i, 55i, 57i, and 57i ct. Sip per-line authentication settings par...

  • Page 391: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-49 configuration parameters appendix a parameter – sip linen display name caller id (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description used in the display name fiel...

  • Page 392: Appendix A

    Operational, basic, and advanced parameters a-50 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – sip linen password password (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description the password that will be used...

  • Page 393: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-51 configuration parameters appendix a parameter – sip linen bla number bla number (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description allows you to assign a phone n...

  • Page 394: Appendix A

    Operational, basic, and advanced parameters a-52 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – sip linen mode line mode (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description allows you to configure the mode ...

  • Page 395: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-53 configuration parameters appendix a sip per-line network settings. Parameter – sip linen proxy ip proxy server (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description...

  • Page 396: Appendix A

    Operational, basic, and advanced parameters a-54 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – sip linex backup proxy ip backup proxy server (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description the ip addre...

  • Page 397: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-55 configuration parameters appendix a parameter – sip linen outbound proxy port outbound proxy port (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description the proxy po...

  • Page 398: Appendix A

    Operational, basic, and advanced parameters a-56 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – sip linen registrar port registrar port (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description the registrar's po...

  • Page 399: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-57 configuration parameters appendix a parameter – sip linex backup registrar port backup registrar port (in web ui) aastra web ui advanced settings->linen-> basic sip network settings configuration files aastra.Cfg, .Cfg...

  • Page 400: Appendix A

    Operational, basic, and advanced parameters a-58 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a advanced sip settings parameter – sip explicit mwi subscription explicit mwi subscription (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configur...

  • Page 401: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-59 configuration parameters appendix a parameter – sip session timer session timer (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration files aastra.Cfg, .Cfg description the time,...

  • Page 402: Appendix A

    Operational, basic, and advanced parameters a-60 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – sip t2 timer t2 timer (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration files aastra.Cfg, .Cfg description this timer is a...

  • Page 403: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-61 configuration parameters appendix a parameter – sip transport protocol transport protocol (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration files aastra.Cfg, .Cfg description...

  • Page 404: Appendix A

    Operational, basic, and advanced parameters a-62 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – sip registration timeout retry timer registration timeout retry timer (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration fi...

  • Page 405: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-63 configuration parameters appendix a rtp, codec, dtmf global settings parameter – sip use basic codecs basic codecs (in web ui) aastra web ui advanced settings->global sip->rtp settings configuration files aastra.Cfg, ....

  • Page 406: Appendix A

    Operational, basic, and advanced parameters a-64 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – sip out-of-band dtmf force rfc2833 out-of-band dtmf (in web ui) aastra web ui advanced settings->global sip->rtp settings configuration files aastra.Cfg, .Cfg descrip...

  • Page 407: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-65 configuration parameters appendix a dtmf per-line settings parameter – sip dtmf method dtmf method (in web ui) aastra web ui advanced settings->global sip->rtp settings configuration files aastra.Cfg, .Cfg description ...

  • Page 408: Appendix A

    Operational, basic, and advanced parameters a-66 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a silence suppression settings parameter – sip silence suppression silence suppression (in web ui) aastra web ui advanced settings->global sip->rtp settings configuration files aas...

  • Page 409: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-67 configuration parameters appendix a voicemail settings parameter – sip linen vmail note: the value of "n" is 1 - 9 for 53i, 55i, 57i, 57i ct. Configuration files aastra.Cfg, .Cfg description use this parameter in the ....

  • Page 410: Appendix A

    Operational, basic, and advanced parameters a-68 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a directory settings parameter – directory 1 directory list (in web ui) aastra web ui operation->directory configuration files aastra.Cfg, .Cfg description the name of a directory ...

  • Page 411: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-69 configuration parameters appendix a callers list settings call forward settings parameter – callers list disabled configuration files aastra.Cfg, .Cfg description enables or disables the callers list. If this parameter...

  • Page 412: Appendix A

    Operational, basic, and advanced parameters a-70 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a missed calls indicator settings parameter – missed calls indicator disabled configuration files aastra.Cfg, .Cfg description enables or disables the missed calls indicator. If th...

  • Page 413: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-71 configuration parameters appendix a xml settings parameter – xml application uri xml application uri (in web ui) aastra web ui operation->softkeys and xml->services configuration files aastra.Cfg, .Cfg description this...

  • Page 414: Appendix A

    Operational, basic, and advanced parameters a-72 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – xml application post list xml push server list (approved ip addresses) (in web ui) aastra web ui advanced settings->configuration server configuration files aastra.Cf...

  • Page 415: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-73 configuration parameters appendix a parameter – xml status scroll delay status scroll delay (seconds) (in web ui) aastra web ui basic settings->preferences configuration files aastra.Cfg, .Cfg description specifies the...

  • Page 416: Appendix A

    Operational, basic, and advanced parameters a-74 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a action uri settings parameter – action uri startup startup (in web ui) aastra web ui advanced settings->action uri configuration files aastra.Cfg, .Cfg description specifies the ...

  • Page 417: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-75 configuration parameters appendix a parameter – action uri incoming incoming call (in web ui) aastra web ui advanced settings->action uri configuration files aastra.Cfg, .Cfg description specifies the uri for which the...

  • Page 418: Appendix A

    Operational, basic, and advanced parameters a-76 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – action uri offhook offhook (in web ui) aastra web ui advanced settings->action uri configuration files aastra.Cfg, .Cfg description specifies the uri for which the ph...

  • Page 419: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-77 configuration parameters appendix a ring tone and tone set global settings parameter – ring tone global ring tone (in web ui) aastra web ui: basic settings->preferences->ring tones ip phone ui options->tones->set ring ...

  • Page 420: Appendix A

    Operational, basic, and advanced parameters a-78 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a ring tone per-line settings parameter – linen ring tone line n (in web ui) aastra web ui: basic settings->preferences->ring tones configuration files aastra.Cfg, .Cfg description...

  • Page 421: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-79 configuration parameters appendix a stuttered dial tone setting call waiting tone setting parameter – stutter disabled stuttered dial tone (in web ui) aastra web ui: basic settings->preferences->general configuration f...

  • Page 422: Appendix A

    Operational, basic, and advanced parameters a-80 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a priority alert settings for sylantro server only parameter – prioity alerting enabled enable priority alerting (in web ui) aastra web ui: basic settings->preferences-> priority a...

  • Page 423: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-81 configuration parameters appendix a parameter – alert community 1 community-1 (in web ui) aastra web ui: basic settings->preferences-> priority alerting settings configuration files aastra.Cfg, .Cfg description when an...

  • Page 424: Appendix A

    Operational, basic, and advanced parameters a-82 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – alert community 3 community-3 (in web ui) aastra web ui: basic settings->preferences-> priority alerting settings configuration files aastra.Cfg, .Cfg description whe...

  • Page 425: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-83 configuration parameters appendix a parameter – alert external alert external (in web ui) aastra web ui: basic settings->preferences-> priority alerting settings configuration files aastra.Cfg, .Cfg description when an...

  • Page 426: Appendix A

    Operational, basic, and advanced parameters a-84 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – alert group alert group (in web ui) aastra web ui: basic settings->preferences-> priority alerting settings configuration files aastra.Cfg, .Cfg description when an "...

  • Page 427: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-85 configuration parameters appendix a parameter – alert priority alert priority (in web ui) aastra web ui: basic settings->preferences-> priority alerting settings configuration files aastra.Cfg, .Cfg description when an...

  • Page 428: Appendix A

    Operational, basic, and advanced parameters a-86 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a language settings parameter – language webpage language (in web ui) ip phone ui options->language aastra web ui basic settings->preferences-> language settings->webpage language ...

  • Page 429: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-87 configuration parameters appendix a language pack settings parameter – language n language n (in web ui) where “n” can be 1, 2, 3, or 4 aastra web ui basic settings->preferences-> language settings configuration file ....

  • Page 430: Appendix A

    Operational, basic, and advanced parameters a-88 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a the following table identifies the language code to use for the ip phone language packs. Language codes (from standard iso 639) the following table identifies the country codes t...

  • Page 431: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-89 configuration parameters appendix a bahamas bahrain bangladesh barbados belarus belgium belize benin bermuda bhutan bolivia bosnia and herzegovina botswana bouvet island brazil british indian ocean territory brunei dar...

  • Page 432: Appendix A

    Operational, basic, and advanced parameters a-90 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a denmark djibouti dominica dominican republic dk dj dm do ecuador egypt el salvador equatorial guinea eritrea estonia ethiopia ec eg sv gq er ee et falkland islands (malvinas) far...

  • Page 433: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-91 configuration parameters appendix a iceland india indonesia iran, islamic republic of iraq ireland isle of man israel italy is in id ir iq ie im il it jamaica japan jersey jordan jm jp je jo kazakhstan kenya kiribati k...

  • Page 434: Appendix A

    Operational, basic, and advanced parameters a-92 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a macao macedonia, the former yugoslav republic of madagascar malawi malaysia maldives mali malta marshall islands martinique mauritania mauritius mayotte mexico micronesia, federa...

  • Page 435: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-93 configuration parameters appendix a pakistan palau palestinian territory, occupied panama papua new guinea paraguay peru philippines pitcairn poland portugal puerto rico pk pw ps pa pg py pe ph pn pl pt pr qatar qa rÉu...

  • Page 436: Appendix A

    Operational, basic, and advanced parameters a-94 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a saint helena saint kitts and nevis saint lucia saint pierre and miquelon saint vincent and the grenadines samoa san marino sao tome and principe saudi arabia senegal serbia seych...

  • Page 437: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-95 configuration parameters appendix a uganda ukraine united arab emirates united kingdom united states united states minor outlying islands uruguay uzbekistan ug ta ae gb us tm uy uz vanuatu vatican city state venezuela ...

  • Page 438: Appendix A

    Operational, basic, and advanced parameters a-96 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a suppress dtmf playback setting parameter – suppress dtmf playback suppress dtmf playback (in web ui) aastra web ui basic settings->preferences configuration files aastra.Cfg, .Cf...

  • Page 439: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-97 configuration parameters appendix a display dtmf digits setting parameter – display dtmf digits display dtmf digits (in web ui) aastra web ui basic settings->preferences->general configuration files aastra.Cfg, .Cfg de...

  • Page 440: Appendix A

    Operational, basic, and advanced parameters a-98 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a intercom and auto-answer settings outgoing intercom settings parameter – sip intercom type type (in web ui) aastra web ui basic settings->preferences-> outgoing intercom settings...

  • Page 441: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-99 configuration parameters appendix a parameter – sip intercom prefix code prefix code (in web ui) aastra web ui basic settings->preferences-> outgoing intercom settings configuration files aastra.Cfg, .Cfg description t...

  • Page 442: Appendix A

    Operational, basic, and advanced parameters a-100 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a incoming intercom setting auto-answer setting parameter – sip intercom mute mic microphone mute (in web ui) aastra web ui basic settings->preferences-> incoming intercom setting...

  • Page 443: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-101 configuration parameters appendix a audio transmit and receive gain adjustment settings parameter – headset tx gain configuration files aastra.Cfg, .Cfg description this is the increased (+db) or decreased (-db) amoun...

  • Page 444: Appendix A

    Operational, basic, and advanced parameters a-102 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – handset tx gain configuration files aastra.Cfg, .Cfg description this is the increased (+db) or decreased (-db) amount of signal transmitted from the handset microph...

  • Page 445: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-103 configuration parameters appendix a parameter – handsfree tx gain configuration files aastra.Cfg, .Cfg description this is the increased (+db) or decreased (-db) amount of signal transmitted from the base microphone t...

  • Page 446

    Directed call pickup (blf or xml call interception) settings parameter – directed call pickup directed call pickup (in web ui) aastra web ui basic settings->preferences ->directed call pickup settings configuration files aastra.Cfg, .Cfg description enables or disables the use of "directed call pick...

  • Page 447: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, rev 01 release 2.0 a-105 configuration parameters appendix a blf subscription period settings parameter – sip blf subscription period blf subscription period (in web ui) aastra web ui advanced settings->global sip ->advanced sip settings conf...

  • Page 448: Appendix A

    Hard key parameters a-106 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a hard key parameters this section provides the hard key settings you can use to enable and disable the redial, conf, and xfer keys on the ip phone. Parameter – redial disabled configuration files aastra...

  • Page 449: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-107 configuration parameters appendix a parameter – call transfer disabled configuration files aastra.Cfg, .Cfg description enables or disables the xfer key on the ip phone. If this parameter is set to 0, the key is active and can be pressed by ...

  • Page 450: Appendix A

    Hard key parameters a-108 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a — softkey/programmable key/feature key parameters this section provides the softkey and programmable key parameters you can configure on the ip phones. The following table provides the number of softke...

  • Page 451: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-109 configuration parameters appendix a *the 536em expansion module consists of 36 softkeys. You can have up to 3 expansion modules on an ip phone totaling 108 softkeys. Valid for 55i, 57i, and 57i ct phones. **the 560em expansion module consist...

  • Page 452: Appendix A

    Hard key parameters a-110 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a softkey settings for 55i, 57i, 57i ct the value of "n" for the following parameters is dependent on the number of softkeys available on the55i, 57i, and 57i ct models. See the table above for applicabl...

  • Page 453: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-111 configuration parameters appendix a callers list - indicates the softkey and/or programmable key is set for accessing the callers list. Directory - indicates the softkey and/or programmable key is set for accessing the directory list. Interc...

  • Page 454: Appendix A

    Hard key parameters a-112 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – softkeyn label label (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description the text label that displays on the ip phone for the softkey. The...

  • Page 455: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-113 configuration parameters appendix a parameter – softkeyn value value (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description this is the value you assign to the softkey. The “softkeyn value” par...

  • Page 456: Appendix A

    Hard key parameters a-114 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – softkeyn line line (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description this is the line associated with the softkey you are configuring. T...

  • Page 457: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-115 configuration parameters appendix a parameter – softkeyn states idle, connected, incoming, outgoing, busy (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description displays the status of the phone...

  • Page 458: Appendix A

    Hard key parameters a-116 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a range valid values are: idle the phone is not being used. Connected the line currently being displayed is in an active call (or the call is on hold) incoming the phone is ringing. Outgoing the user is ...

  • Page 459: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-117 configuration parameters appendix a programmable key settings for 53i and 55i • the value of "n" for the following parameters is dependent on the number of programmable keys available on the 53i models. See the table on page 108 for the appl...

  • Page 460: Appendix A

    Hard key parameters a-118 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a default value not applicable range none line speeddial dnd ("do not disturb" in the aastra web ui) blf list xml flash sprecode park pickup lcr directory callers list conf xfer example prgkey1 type: spe...

  • Page 461: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-119 configuration parameters appendix a parameter – prgkeyn value value (in web ui) aastra web ui operation->programmable keys configuration files aastra.Cfg, .Cfg description this is the value you assign to the programmable key. The “prgkeyn va...

  • Page 462: Appendix A

    Hard key parameters a-120 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter– prgkeyn line line (in web ui) aastra web ui operation->programmable keys configuration files aastra.Cfg, .Cfg description this is the line associated with the programmable key you are config...

  • Page 463: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-121 configuration parameters appendix a top softkey settings for 57i and 57i ct parameter – topsoftkeyn type top softkeys->type (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description the type of so...

  • Page 464: Appendix A

    Hard key parameters a-122 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a • callers list - indicates the softkey is set for accessing the callers list. • directory - indicates the softkey is set for accessing the directory list. • intercom - indicates the softkey is set to b...

  • Page 465: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-123 configuration parameters appendix a parameter – topsoftkeyn label top softkeys->label (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description the text label that displays on the ip phone for the...

  • Page 466: Appendix A

    Hard key parameters a-124 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – topsoftkeyn value top softkeys->value (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description this is the value you assign to the softkey. The...

  • Page 467: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-125 configuration parameters appendix a parameter – topsoftkeyn line top softkeys->line (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description this is the line associated with the softkey you are c...

  • Page 468: Appendix A

    Hard key parameters a-126 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a handset feature key settings for the 57i ct parameter – featurekeyn type type (in web ui) aastra web ui operation->handset keys configuration files aastra.Cfg, .Cfg description the type of feature key ...

  • Page 469: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-127 configuration parameters appendix a range none line transfer conference public intercom directory callers list park pickup flash example featurekey1 type: line featurekey2 type: public featurekey3 type: park featurekey4 type: pickup paramete...

  • Page 470: Appendix A

    Hard key parameters a-128 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a expansion module key settings for 536m (53i/55i) and 560m (57i/57i ct) parameter – expmodx keyn type type (in web ui) aastra web ui operation->expansion module n configuration files aastra.Cfg, .Cfg de...

  • Page 471: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-129 configuration parameters appendix a parameter – expmodx keyn value value (in web ui) aastra web ui operation->expansion module n configuration files aastra.Cfg, .Cfg description this is the value you assign to the softkey. The “expmodx keyn ...

  • Page 472: Appendix A

    Hard key parameters a-130 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter – expmodx keyn line line (in web ui) aastra web ui operation->expansion module n configuration files aastra.Cfg, .Cfg description this is the line associated with the softkey you are configur...

  • Page 473: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-131 configuration parameters appendix a locking softkeys and programmable keys parameter– softkeyn locked configuration files aastra.Cfg, .Cfg description locks the specified sotkey on the 55i, 57i, or 57i ct ip phone. Locking the key prevents a...

  • Page 474: Appendix A

    Hard key parameters a-132 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a parameter– prgkeyn locked configuration files aastra.Cfg, .Cfg description locks the specified top sotkey on the 53i or 55i ip phone. Locking the key prevents a user from changing or configuring the pr...

  • Page 475: Appendix A

    Hard key parameters 41-001160-00, rev 01 release 2.0 a-133 configuration parameters appendix a parameter– expmodx key n locked configuration files aastra.Cfg, .Cfg description locks the specified top sotkey on the 5-series expansion module attached to the ip phone. Locking the key prevents a user fr...

  • Page 476: Appendix A

    Advanced operational parameters a-134 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a advanced operational parameters the following parameters in this section allow the system admininstrator to set advanced operational features on the ip phones. Mac address/line number this ...

  • Page 477: Appendix A

    Advanced operational parameters 41-001160-00, rev 01 release 2.0 a-135 configuration parameters appendix a blind transfer setting. Parameter – sip send line send line number in register message (in web ui) aastra web ui: advanced settings->global sip-> advanced sip settings configuration files aastr...

  • Page 478: Appendix A

    Advanced operational parameters a-136 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a update caller id setting. Boot sequence recovery mode. Parameter – sip update callerid configuration files aastra.Cfg, .Cfg description enables or disables the updating of the caller id inf...

  • Page 479: Appendix A

    Advanced operational parameters 41-001160-00, rev 01 release 2.0 a-137 configuration parameters appendix a single call restriction parameter – two call support two call support (in web ui) aastra web ui advanced settings->global sip->rtp settings configuration files aastra.Cfg, .Cfg description enab...

  • Page 480: Appendix A

    Troubleshooting parameters a-138 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a troubleshooting parameters the following parameters in this section allow the system admininstrator to set logging and support settings for troubleshooting purposes. Log settings parameter – log...

  • Page 481: Appendix A

    Troubleshooting parameters 41-001160-00, rev 01 release 2.0 a-139 configuration parameters appendix a parameter – log level module aastra web ui advanced settings->troubleshooting->module configuration files aastra.Cfg, .Cfg description specifies the severity level of the logs to be reported to a lo...

  • Page 482: Appendix A

    Troubleshooting parameters a-140 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix a.

  • Page 483: Appendix B

    41-001160-00, rev 01 release 2.0 b-1 appendix b appendix b configuration server setup about this appendix introduction this appendix describes how to setup the tftp protocol configuration server in your network. Topics this appendix covers the following topics: topic page configuration server protoc...

  • Page 484: Appendix B

    Configuration server protocol setup b-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix b configuration server protocol setup tftp server set-up there are a number of tftp servers available. Pumpkin is one of such tftp servers. Use the keywords “pumpkin tftp server” on google ...

  • Page 485: Appendix B

    Configuration server protocol setup 41-001160-00, rev 01 release 2.0 b-3 configuration server setup appendix b if you want to prevent users from writing files to the directory select the “deny all requests” in the “write request behavior” category. Click the ok button after you have entered all the ...

  • Page 487: Appendix C

    41-001160-00, rev 01 release 2.0 c-1 appendix c appendix c configuring the ip phone at the asterisk ip pbx about this appendix introduction this appendix describes how to setup a user’s phone with an extension to make and receive calls using the asterisk as the pbx. Topics this appendix covers the f...

  • Page 488: Appendix C

    Ip phone at the asterisk ip pbx c-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix c ip phone at the asterisk ip pbx the following configuration illustrates how to create a user with an extension to make and receive calls using the asterisk as the pbx. This configuration is d...

  • Page 489: Appendix C

    Ip phone at the asterisk ip pbx 41-001160-00, rev 01 release 2.0 c-3 configuring the ip phone at the asterisk ip pbx appendix c ;able to use it. In this example' sip' is used. You can use ;whatever you like, but make sure they are the same, you will ;need to make an entry in your extensions.Conf fil...

  • Page 491: Appendix D

    41-001160-00, rev 01 release 2.0 d-1 appendix d appendix d sample configuration files about this appendix introduction this appendix provides sample configuration files for the 57i, 57i ct, and 53i. Topics this appendix covers the following topics: topic page sample configuration files page d-2 57i ...

  • Page 492: Appendix D

    Sample configuration files d-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d sample configuration files this section consists of the sample configuration files necessary to configure the ip phones. The general format is similar to configuration files used by several unix-b...

  • Page 493: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-3 sample configuration files appendix d # the aastra 57i, 57ict, and 53i phones will download 2 # configuration files from the tftp server while restarting, the # "aastra.Cfg" file and the ".Cfg" file. These two configuration # files can ...

  • Page 494: Appendix D

    Sample configuration files d-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d # network settings ## = = = = = = = = # notes: if dhcp is enabled, you do not need to set these network # settings. Although depending on you dhcp server configuration you # may still have to set ...

  • Page 495: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-5 sample configuration files appendix d # nat device between the server and the phone, then you must set the # following two parameters for the phone to function correctly. #sip nortel nat support: 1 # 1 = enabled #sip nortel nat timer: 6...

  • Page 496: Appendix D

    Sample configuration files d-6 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d ## = = = = = = = = = = = = = = = # notes: this section defines which server the phone retrieves new # firmware images and configuration files from. Three protocols are # supported tftp, ftp and ht...

  • Page 497: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-7 sample configuration files appendix d # # (1) the entered number is an exact match in the dial plan # (2) the "#" symbol has been pressed # (3) a timeout occurs # # the dial plan is a regular expression that supports the following # syn...

  • Page 498: Appendix D

    Sample configuration files d-8 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d #sip dial plan terminator: 1 # enable sending of the "#" symbol to # to the proxy in the dial string #------------------------------------------------------------------ # general sip settings # = ...

  • Page 499: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-9 sample configuration files appendix d sip screen name: joe smith # the name display on the phone's screen sip user name: 4256 # the phone number sip display name: joseph smith # the caller name sent out when making # a call. Sip vmail: ...

  • Page 500: Appendix D

    Sample configuration files d-10 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d sip line3 vmail: *78 # configure line 5 (a soft key line) as an ordinary line # of a test server sip line5 screen name: test 1 sip line5 user name: 5551001 sip line5 display name: test 1 sip line...

  • Page 501: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-11 sample configuration files appendix d # with it as seen here in the default softkey settings. # softkey types: "line", "speeddial", "blf", "list", "dnd" # softkey label: alpha numeric name for the softkey. The maximum # number of chara...

  • Page 502: Appendix D

    Sample configuration files d-12 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d softkey8 line: 1 # list softkey11 type: list softkey12 type: list 57i ct sample configuration file # sample configuration file # ========================= # date: october 26th, 2005 # phone model...

  • Page 503: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-13 sample configuration files appendix d # "aastra.Cfg" file and the ".Cfg" file. These two configuration # files can be used to configure all of the settings of the phone with # the exception of assigning a static ip address to a phone a...

  • Page 504: Appendix D

    Sample configuration files d-14 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d # network settings # ================ # notes: if dhcp is enabled, you do not need to set these network # settings. Although depending on you dhcp server configuration you # may still have to set...

  • Page 505: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-15 sample configuration files appendix d #ip: # this value is unique to each phone on a server # and should be set in the ".Cfg" file if # setting this manually. #subnet mask: #default gateway: #dns1: #dns2: # time server settings # =====...

  • Page 506: Appendix D

    Sample configuration files d-16 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d #sip nortel nat timer: 60 # seconds between keep alive messages # option 2: # # if you are using a session border controller, you should set the # outbound proxy to the session border controller ...

  • Page 507: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-17 sample configuration files appendix d # notes: this section defines which server the phone retrieves new # firmware images and configuration files from. Three protocols are # supported tftp, ftp and http download protocol: tftp # valid...

  • Page 508: Appendix D

    Sample configuration files d-18 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d # as you dial a number on the phone, the phone will initiate a call # when one of the following conditions are meet: # # (1) the entered number is an exact match in the dial plan # (2) the "#" sy...

  • Page 509: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-19 sample configuration files appendix d # with a 0 or 1, any 5 digit number # beginning with a number between 2 and 8 # (inclusive) or a 12 digit number # beginning with 91 #sip dial plan terminator: 1 # enable sending of the "#" symbol ...

  • Page 510: Appendix D

    Sample configuration files d-20 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d # l1 to l4 on the 57i and 57ict # l1 to l3 on the 53i # # these can be over-ridden on a per-line basis using the per-line # settings. # # see the admin guide for a detailed explaination of how th...

  • Page 511: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-21 sample configuration files appendix d # configure line 3 as the support broadsoft sca line # - the proxy and registrar settings are taken from the global # settings above sip line3 screen name: support sip line3 user name: 4000 sip lin...

  • Page 512: Appendix D

    Sample configuration files d-22 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d # softkeys can be set either server wide or unique to each phone. # setting softkeys as line/call appearances should be done in the # ".Cfg" file, since these are unique to each phone. # notes: #...

  • Page 513: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-23 sample configuration files appendix d softkey2 type: speeddial softkey2 label: "call return" softkey2 value: *69 # dnd key softkey4 type: dnd softkey4 label: dnd # line appearance softkey6 type: line softkey6 label: test 1 softkey6 lin...

  • Page 514: Appendix D

    Sample configuration files d-24 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d # aastra.Cfg or the .Cfg files. # # the feature keys are displayed when the user presses the f button # on the cordless phone's hand set. If any changes to the features # keys are made using thes...

  • Page 515: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-25 sample configuration files appendix d feature key 0 gr label: "gr-line 1" # german label for the key. Displayed when the phone's language # is set to use german feature key 0 it label: "it-line 1" # italian label for the key. Displayed...

  • Page 516: Appendix D

    Sample configuration files d-26 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d # 58 - menu (options) # 59 - feature key # 60 - redial # 61 - directory # 62 - callers' list # 63 - services # 86 - icom #feature key 0 base event: 1 # indicates a corresponding action to perform...

  • Page 517: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-27 sample configuration files appendix d feature key 0 hs event: 7 feature key 0 base event: 1 feature key 1 en label: "conf." feature key 1 fr label: "fr-conf." feature key 1 sp label: "sp-conf." feature key 1 control: 1 feature key 1 hs...

  • Page 518: Appendix D

    Sample configuration files d-28 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d feature key 5 hs event: 62 feature key 5 control: 1 feature key 5 base event: 13 feature key 6 en label: "top" feature key 6 fr label: "fr-top" feature key 6 sp label: "sp-top" feature key 6 hs e...

  • Page 519: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-29 sample configuration files appendix d 53i sample configuration file # sample configuration file #= = = = = = = = = = = = = = = = = = = = = # date: october 26th, 2005 # phone model: 53i # notes: # # the general format used here is simil...

  • Page 520: Appendix D

    Sample configuration files d-30 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d # the "aastra.Cfg" file configures the settings server wide, while # the ".Cfg" file configures only the phone with the mac # address for which the file is named (for example, # "00085d0304f4.Cfg...

  • Page 521: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-31 sample configuration files appendix d #ip: # this value is unique to each phone on a server # and should be set in the ".Cfg" file if # setting this manually. #subnet mask: #default gateway: #dns1: #dns2: # time server settings # =====...

  • Page 522: Appendix D

    Sample configuration files d-32 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d #sip nortel nat timer: 60 # seconds between keep alive messages.

  • Page 523: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-33 sample configuration files appendix d # option 2: # # if you are using a session border controller, you should set the # outbound proxy to the session border controller address #sip outbound proxy: sbc.Aastra.Com #sip outbound proxy po...

  • Page 524: Appendix D

    Sample configuration files d-34 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d.

  • Page 525: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-35 sample configuration files appendix d ## tftp server settings tftp server: 192.168.0.130 #alternate tftp server: #use alternate tftp server: 1 # if your dhcp server assigns # a tftp server address which # you do not use, you can use # ...

  • Page 526: Appendix D

    Sample configuration files d-36 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d #.

  • Page 527: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-37 sample configuration files appendix d # 0,1,2,3,4,5,6,7,8,9,*,# : matches the keypad symbols # x : matches any digit (0...9) # + : matches 0 or more repetitions of the # : previous expression # [] : matches any number inside the bracke...

  • Page 528: Appendix D

    Sample configuration files d-38 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d # general sip settings # ====================== #sip session timer: 30 # enable support of rfc4028, the default # value of 0 disables this functionality #sip transport protocol: 0 # use udp (1), ...

  • Page 529: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-39 sample configuration files appendix d sip auth name: jsmith # account used to authenticate user sip password: 12345 # password for authentication account sip mode: 0 # line type: # 0 - generic, # 1 - broadsoft sca line # 2 - nortel lin...

  • Page 530: Appendix D

    Sample configuration files d-40 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix d sip line5 screen name: test 1 sip line5 user name: 5551001 sip line5 display name: test 1 sip line5 auth name: 5551001 sip line5 password: 5551001 sip line5 mode: 0 sip line5 proxy ip: 10.50.10.1...

  • Page 531: Appendix D

    Sample configuration files 41-001160-00, rev 01 release 2.0 d-41 sample configuration files appendix d # prgkey value: if prgkey type is a speeddial, any dtmfs (from # 0 - 9, *, "#") or a comma (,) for 500ms pause and # 'e' for on-hook can be set for the value. # if prgkey type is blf it is the exte...

  • Page 533: Appendix E

    41-001160-00, rev 01 release 2.0 e-1 appendix e appendix e sample blf softkey settings about this appendix introduction this appendix provides sample blf softkey settings for both the asterisk server and the broadsoft broadworks server. Topics this appendix covers the following topics: topic page sa...

  • Page 534: Appendix E

    Sample blf softkey settings e-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix e sample blf softkey settings asterisk blf the following are sample softkey and programmable key configurations to enable asterisk blf support on aastra ip phones. 57i and 57i ct configuration para...

  • Page 535: Appendix E

    Sample blf softkey settings 41-001160-00, rev 01 release 2.0 e-3 sample blf softkey settings appendix e broadsoft broadworks blf the following are sample softkey and programmable key configurations to enable broadsoft broadworks busy lamp field support on aastra ip phones. 57i and 57i ct configurati...

  • Page 537: Appendix F

    41-001160-00, rev 01 release 2.0 f-1 appendix f appendix f sample multiple proxy server configuration about this appendix introduction this appendix provides a sample multiple proxy server configuration. Topics this appendix covers the following topics: topic page multiple proxy server configuration...

  • Page 538: Appendix F

    Multiple proxy server configuration f-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix f multiple proxy server configuration multiple proxy servers can be configured in the aastra.Cfg file or the .Cfg file. In the example below, the default proxy setting is used if no specifi...

  • Page 539: Appendix F

    Multiple proxy server configuration 41-001160-00, rev 01 release 2.0 f-3 sample multiple proxy server configuration appendix f continued..... #line 2 sip line2 auth name: sip line2 password: sip line2 mode: 0 sip line2 user name: sip line2 display name: sip line2 screen name: #line 3 sip line3 auth ...

  • Page 541: Appendix G

    41-001160-00, rev 01 release 2.0 g-1 appendix g appendix g creating an xml application about this appendix introduction this appendix provides information required to create an xml application for use on the ip phones. Topics this appendix covers the following topics: topic page how to create an xml...

  • Page 542: Appendix G

    About this appendix g-2 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g xml image objects (55i, 57i/57i ct only) page g-31 attributes/options to use with xml objects page g-25 http post page g-45 xml schema file page g-48 topic page.

  • Page 543: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-3 creating an xml application appendix g how to create an xml application overview this appendix describes how to create an xml application for your ip phones. Sections in this appendix include: • xml format • creating xml objects •...

  • Page 544: Appendix G

    How to create an xml application g-4 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g creating xml objects this section describes how to create xml objects. The ip phone xml api supports the following proprietary objects that allow for the customization of the ip phone’s disp...

  • Page 545: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-5 creating an xml application appendix g creating custom softkeys developers can link arbitrary uris to softkeys in the xml screens and can invoke softkey behavior to each xml screen type (text menu, text screen, user input, directo...

  • Page 546: Appendix G

    How to create an xml application g-6 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g text menu object (menu screens) the text menu object allows application developers to create a numerical list of menu items on the ip phones. The go-to line support, arrow indicator, and scr...

  • Page 547: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-7 creating an xml application appendix g xml example: traffic reports rss_to_xml.Pl employee list employees.Xml weather http://10.50.10.52/weather.Pl xml screen example: note: the maximum number of items to be included in a text men...

  • Page 548: Appendix G

    How to create an xml application g-8 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g text screen object (text screens) the screen object can be used to display text. The screen word wraps appropriately and can scroll to display a message longer then four lines. Implementatio...

  • Page 549: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-9 creating an xml application appendix g xml screen example: text screen format object (for text screens) the aastraipphoneformattedtextscreen object allows you to specify a format for the text that displays in the lcd window on the...

  • Page 550: Appendix G

    How to create an xml application g-10 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g • the third block displays below the second block. By default, the third block displays static text, and takes up whatever lines remain blank on the lcd screen. Using the aastraipphoneforma...

  • Page 551: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-11 creating an xml application appendix g xml example: the following is an example of using the aastraipphoneformattedtextscreen object with a static line at the top and bottom blocks and 2 scrolling lines in the middle block. A lin...

  • Page 552: Appendix G

    How to create an xml application g-12 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g ip phone 53i note: you can view all 5 lines at once on the 55i, 57i and 57i ct ip phones. You can view only 2 lines at a time (up to 5 lines) on the 53i ip phone. A line of static text this...

  • Page 553: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-13 creating an xml application appendix g userinput object (user input screens) the userinput object allows application developers create screens for which the user can input text where applicable. (line 1 is a title, line 4 is an i...

  • Page 554: Appendix G

    How to create an xml application g-14 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g xml description: "yes/no" destroyonexit = "yes/no"> title string, usually same as menu title "yes/no" destroyonexit = "yes/no"> enter ip address or host name target receiving the input para...

  • Page 555: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-15 creating an xml application appendix g xml example: server ip: http://10.50.10.53/script.Pl proxy xml screen example: proxy server backspace done server ip: dot cancel.

  • Page 556: Appendix G

    How to create an xml application g-16 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g implementation (number) the following is how you would implement the userinput object using numbers. Softkeys: • 1=backspace, • 5=cancel, • 6=done xml example: port: http://10.50.10.53/scri...

  • Page 557: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-17 creating an xml application appendix g implementation (string) the following is how you would implement the userinput object using strings in xml. Softkeys: • 1=backspace, • 2=dot, • 3=tri-mode key, • 4=nextspace, • 5=cancel, • 6...

  • Page 558: Appendix G

    How to create an xml application g-18 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g userinput object for time and date formats (user input screens) the aastraipphoneinputscreen object allows you to specify us ( (hh:mm:ss am/pm and mm/dd/yyyy) or international (hh:mm:ss and...

  • Page 559: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-19 creating an xml application appendix g ip phones 55i, 57i/57i ct ip phone 53i international time enter current time: time 14:23:22 ip phones 55i, 57i/57i ct ip phone 53i note: if you don’t specify a time, the xml script uses the ...

  • Page 560: Appendix G

    How to create an xml application g-20 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g united states date enter birthday: date 12/22/1980 ip phones 55i, 57i/57i ct ip phone 53i international date enter birthday: date ip phones 55i, 57i/57i ct ip phone 53i us date done enter b...

  • Page 561: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-21 creating an xml application appendix g directory object (directory list screen) (57i only) the directory object allows you to browse an online directory in real time. It displays an automatically numbered list of contacts. By sel...

  • Page 562: Appendix G

    How to create an xml application g-22 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g xml example: 57i - john doe 1 10.50.10.49 53i - john doe 2 4326 57i ct - john doe 3 9982691234 xml screen example:: note: the maximum number of items to be included in a directory object is...

  • Page 563: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-23 creating an xml application appendix g status message object (idle screen) the ip phones support an xml aastraipphonestatus object for displaying status messages on a single designated line on the phone’s idle screen. The message...

  • Page 564: Appendix G

    How to create an xml application g-24 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g xml examples example 1: the following is an example of using the aastraipphonestatus object: abc12345 server side call forwarding disabled in this example, the aastraipphonestatus object se...

  • Page 565: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-25 creating an xml application appendix g execute commands object (for executing xml commands) an aastraipphoneexecute object on the ip phones allows the phone to execute commands using xml. The phones support the following execute ...

  • Page 566: Appendix G

    How to create an xml application g-26 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g the following example shows an aastraipphoneexecute object using the reset command: the following example shows the aastraipphoneexecute object using a url: when the phone receives this obj...

  • Page 567: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-27 creating an xml application appendix g dynamic configuration object (to push a configuration to the phone) the ip phones provide an xml feature that allows you to make configuration changes to the phone that take affect immediate...

  • Page 568: Appendix G

    How to create an xml application g-28 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g xml example: the following is an example of an xml configuration script that creates a softkey you can press on the ip phone to push the configuration from the server to the phone: softkey1...

  • Page 569: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-29 creating an xml application appendix g dynamic configuration parameters the following table identifies which configuration parameters change dynamically when using xml configuration scripts to push the configuration to the phone....

  • Page 570: Appendix G

    How to create an xml application g-30 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g *changes to subscriptions (blf or bla) require a reboot. **this parameter is dynamic so a user can’t access it or add to it. However, you need to reboot the phone to clear the list. *** you...

  • Page 571: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-31 creating an xml application appendix g xml image objects (55i, 57i/57i ct only) the 55i and 57i/57i ct ip phones provide an xml feature that allows you to load images in xml applications that display to the lcd screen. The follow...

  • Page 572: Appendix G

    How to create an xml application g-32 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g you can include images with an xml object in two ways: • using pixel data stored with specified tags • using an internal bitmap loaded via a specified uri the following paragraphs describe ...

  • Page 573: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-33 creating an xml application appendix g xml example: the xml script for the aastraipphoneimagescreen object is as follows: horizontalalign = "left,middle,right,'pixel'" height="'integer'", width="'integer'"> ff00f800ff00ffffffffff...

  • Page 574: Appendix G

    How to create an xml application g-34 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g aastraipphoneimagemenu the aastraipphoneimagemenu object allows you to use a bitmap image to display as a menu. Each menu item is linked to a keypad key (0-9, *, #). You can use this type o...

  • Page 575: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-35 creating an xml application appendix g each uri is appended to the “base” uri if one exists. The default softkey is a “done” key at the bottom right position. It is a parse error if two uris specify the same index. Xml screen exa...

  • Page 576: Appendix G

    How to create an xml application g-36 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g aastraipphonetextmenu (icon menu) the aastraipphonetextmenu (icon menu) object is identical to the “text menu object (menu screens)” described on page 6 , except a small icon image appears ...

  • Page 577: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-37 creating an xml application appendix g xml screen example: using the you can incorporate the use of an attribute in the xml script to define the images you will use with the aastraipphonetextmenu object. After you define the icon...

  • Page 578: Appendix G

    How to create an xml application g-38 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g you can use one or both ways to load images within the same xml script. The softkey icons display at the edge of the screen. Any xml object that supports softkeys can support the optional t...

  • Page 579: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-39 creating an xml application appendix g xml screen example: ip phone internal icon images the ip phones have internal icon images you can use when specifying the “icon:” attribute in the . The following table lists the internal ic...

  • Page 580: Appendix G

    How to create an xml application g-40 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g arrowup arrowdown arrowsupanddown filledcircle emptycircle envelope prohibit square ellipse tailarrowup tailarrowdown uri name displays this:.

  • Page 581: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-41 creating an xml application appendix g attributes/options to use with xml objects beep attribute (configurable via xml objects, config files, or aastra web ui) you can enable or disable a “beep”option to indicate a status on the ...

  • Page 582: Appendix G

    How to create an xml application g-42 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g timeout attribute (configurable via xml objects only) the xml “timeout” attribute allows you to specify a timeout value for the lcd screen display. You must use the “timeout” aattribute in ...

  • Page 583: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-43 creating an xml application appendix g lockin attribute (configurable via xml objects only) the xml “lockin” attribute allows you to specify whether or not the information on the lcd screen stays displayed when other events occur...

  • Page 584: Appendix G

    How to create an xml application g-44 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g cancelaction attribute (configurable via xml objects only) the xml “cancelaction” attribute allows you to specify a uri that a get is executed on when the user presses the default cancel ke...

  • Page 585: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-45 creating an xml application appendix g http post in addition to initiating a request to an xml application from the services menu, an http server can push an xml object to the phone via http post. The phone parses this object imm...

  • Page 586: Appendix G

    How to create an xml application g-46 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g example 2: below is a sample php source code which sends an xml object to an aastra phone. # function push2phone($server,$phone,$data) { # url-encode the xml object $xml = "xml=".Urlencode(...

  • Page 587: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-47 creating an xml application appendix g http refresh header you can use an http refresh header with the xml screen objects on the ip phones. This feature provides the following: • all current xml screen objects have the ability to...

  • Page 588: Appendix G

    How to create an xml application g-48 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g http language header you can use an http language header with the xml screen objects on the ip phones. By including the language information in the http header, the http get includes the ph...

  • Page 589: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-49 creating an xml application appendix g.

  • Page 590: Appendix G

    How to create an xml application g-50 41-001160-00, rev 01 release 2.0 ip phone administrator guide appendix g.

  • Page 591: Appendix G

    How to create an xml application 41-001160-00, rev 01 release 2.0 g-51 creating an xml application appendix g.

  • Page 593: Limited W

    41-001160-00, rev 01 release 2.0 -1 limited w arranty limited warranty aastra telecom warrants this product against defects and malfunctions during a one (1) year period from the date of original purchase. If there is a defect or malfunction, aastra telecom shall, at its option, and as the exclusive...

  • Page 594: Limited W

    -2 41-001160-00, rev 01 release 2.0 ip phone administrator guide limited w arranty warranty repair services should the set fail during the warranty period: in north america, please call 1-800-574-1611 for further information. Outside north america, contact your sales representative for return instru...

  • Page 595: Index

    41-001160-00, rev 01 release 2.0 index-1 index a aastra web ui advanced settings description 13 . Basic settings description 13 . Enabling and disabling 14 . Operation description 12 . Status description 12 . Administration guide, for ip phone xiv . Administrator options 1 . Auto-answer 142 . About ...

  • Page 596: Index

    Index-2 41-001160-00, rev 01 release 2.0 index xml push server list 24 . Configuration server settings 23 . D dhcp 4 . Configuring 5 . Not using 4 . Using 4 . Dial plan configuring 140 . Dial plan terminator overview 139 . Dial plan, emergency 12 . Dial plans overview 137 . Dial tones, stuttered abo...

  • Page 597: Index

    41-001160-00, rev 01 release 2.0 index-3 index i installation guide, for ip phone xiv . Intercom feature configuring 143 . Incoming calls 143 . Outgoing calls 142 . Ip phone ui 2 . L language overview 164 . Specifying on ip phone 167 . Language pack settings 87 . Language settings 86 . Last call ret...

  • Page 598: Index

    Index-4 41-001160-00, rev 01 release 2.0 index blf subscription period 105 . Blind transfer setting 135 . Boot sequence recover mode 136 . Call forward settings 69 . Callers list settings 69 . Configuration server 11 . Dial plan 37 . Directed call pickup 104 . Directory settings 68 . Dscp 27 . Dtmf ...

  • Page 599: Index

    41-001160-00, rev 01 release 2.0 index-5 index ring tones 148 . Configuring 151 . Rtp configuring 56 . , 60 . Silenace suppression 59 . Rtp port 56 . Rtp settings 19 . Basic codecs 19 . Customizing codec preference list 19 . Dtmf method 19 . Forcing rfc2833 out-of-band dtmf 19 . Silence suppression ...

  • Page 600: Index

    Index-6 41-001160-00, rev 01 release 2.0 index v vlan configuring 31 . Dscp range 33 . Priority mapping 33 . Voicemail configuring 113 . Overview 113 . Using 115 . W warranty 1 . Warranty exclusions 1 . X xfer key, enabling/disabling 18 . Xml configuring 122 . Configuring on ip phone 121 . Customize...

  • Page 602

    Sip ip phone administrator guide models 53i, 55i, 57i, and 57i ct © 2007 aastra telecom inc. If you’ve read this owner’s manual and consulted the troubleshooting section and still have problems, please visit our website at www.Aastra.Com or call 1-800-574-1611 for technical assistance. 41-001160-00 ...