1. DL manuals
  2. Aastra
  3. IP Phone
  4. 53I
  5. Administrator's Manual

Aastra 53I Administrator's Manual

Manual is about: SIP IP PHONE Release 2.1

Summary of 53I

  • Page 1

    Administrator guide release 2.1 si sip i ip phone phone 53i, 55i, 57i, 57i c 53i, 55i, 57i, 57i ct 41-001160-00 rev 04.

  • Page 2

    Aastra telecom will not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use. While every effort has been made to ensure accuracy, aastra telecom will not be liable for technical or editorial errors or omissions contained within this docum...

  • Page 3: Software License Agreement

    41-001160-00, release 2.1, rev 04 iii software license agreement aastra telecom inc., hereinafter known as "seller", grants to customer a personal, worldwide, non-transferable, non-sublicenseable and non-exclusive, restricted use license to use software in object form solely with the equipment for w...

  • Page 5: Contents

    41-001160-00, release 2.1 rev 04 v contents contents preface about this guide ...............................................................................................................Xiii . Introduction ..............................................................................................

  • Page 6: Contents

    Vi 41-001160-00, release 2.1 rev 04 contents chapter 2 configuration interface methods . About this chapter ...........................................................................................................2-1 . Configuration methods ............................................................

  • Page 7: Contents

    41-001160-00, release 2.1 rev 04 vii contents chapter 4 configuring network and session initiation protocol (sip) features . About this chapter ...........................................................................................................4-1 . Overview .....................................

  • Page 8: Contents

    Viii 41-001160-00, release 2.1 rev 04 contents xml beep support .................................................................................................5-48 . Status scroll delay .................................................................................................5-50 . Incoming...

  • Page 9: Contents

    41-001160-00, release 2.1 rev 04 ix contents chapter 6 configuring advanced operational features . About this chapter ...........................................................................................................6-1 . Advanced operational features ..........................................

  • Page 10: Contents

    X 41-001160-00, release 2.1 rev 04 contents chapter 9 troubleshooting . About this chapter ...........................................................................................................9-1 . Troubleshooting ...................................................................................

  • Page 11: Contents

    41-001160-00, release 2.1 rev 04 xi contents sip basic, global settings .................................................................................... A-41 . Sip basic, per-line settings ................................................................................. A-50 . Centralized confer...

  • Page 12: Contents

    Xii 41-001160-00, release 2.1 rev 04 contents softkey/programmable key/feature key/expansion module key parameters ......... A-136 . Softkey settings for 55i, 57i, 57i ct .................................................................... A-137 . Programmable key settings for 53i and 55i .............

  • Page 13: Contents

    41-001160-00, release 2.1 rev 04 xiii contents appendix d sample configuration files . About this appendix ....................................................................................................... D-1 . Sample configuration files ...........................................................

  • Page 14: Contents

    Xiv 41-001160-00, release 2.1 rev 04 contents xml image objects (55i, 57i/57i ct only) ............................................................G-48 . Attributes/options to use with xml objects .........................................................G-58 . Http post ................................

  • Page 15: Preface

    41-001160-00, release 2.1, rev 04 xiii preface preface about this guide introduction this sip ip phone administrator guide provides information on the basic network setup, operation, and maintenance of the ip phones, models 53i, 55i, 57i, and 57i cordless (57i ct). It also includes details on the fu...

  • Page 16: Preface

    About this guide xiv 41-001160-00, release 2.1, rev 04 ip phone administrator guide preface other documentation the ip phone documentation consists of: • sip ip phone installation guide – contains installation and set-up instructions, information on general features and functions, and basic options ...

  • Page 17: Preface

    41-001160-00, release 2.1, rev 04 xv preface chapters and appendixes in this guide this guide contains the following chapters and appendixes: for go to an overview of the ip phone firmware installation information chapter 1 ip phone interface methods chapter 2 administrator option information chapte...

  • Page 19: Overview

    41-001160-00, release 2.1, rev 04 1-1 overview chapter 1 overview about this chapter introduction this chapter briefly describes the ip phone models, and provides information about installing the ip phone firmware. It also describes the firmware and configuration files that the ip phone models use f...

  • Page 20: Overview

    Ip phone models 1-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide overview ip phone models description the ip phone models 53i, 55i, 57i, and 57i ct communicate over an ip network allowing you to receive and place calls in the same manner as a regular business telephone. All phone m...

  • Page 21: Overview

    Ip phone models 41-001160-00, release 2.1, rev 04 1-3 overview overview optional accessories the following are optional accessories for the ip phones. A power over ethernet (poe) inline power injector supplies 48v power to the ip phone through the ethernet cable on pins 4 & 5 and 7 & 8. Reference fo...

  • Page 22: Overview

    Ip phone models 1-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide overview the 536m module adds 36 additional softkeys to the ip phone models 53i, 55i, 57i, and 57i ct. The 536m provides paper labels for each softkey. Up to 3 modules can be piggy-backed to provide up to 108 addition...

  • Page 23: Overview

    Ip phone models 41-001160-00, release 2.1, rev 04 1-5 overview overview model 53i ip phone this section provides brief information about the model 53i ip phone. It includes a list of features, and describes the hard keys and default programmable keys on the 53i. 53i phone features • 3-line lcd scree...

  • Page 24: Overview

    Ip phone models 1-6 41-001160-00, release 2.1, rev 04 ip phone administrator guide overview 53i key descriptions* keys key description goodbye key - ends an active call. The goodbye key also exits an open list, such as the options list, without saving changes. Options key - accesses options to custo...

  • Page 25: Overview

    Ip phone models 41-001160-00, release 2.1, rev 04 1-7 overview overview *see the aastra 53i user guide for more information about each of these keys. Navigation keys - pressing the up and down arrow keys lets you view different status and text messages on the lcd display (if there is more than 1 lin...

  • Page 26: Overview

    Ip phone models 1-8 41-001160-00, release 2.1, rev 04 ip phone administrator guide overview model 55i ip phone this section provides brief information about the model 55i ip phone. It includes a list of features, and describes the hard keys, default programmable keys, and default softkeys on the 55i...

  • Page 27: Overview

    Ip phone models 41-001160-00, release 2.1, rev 04 1-9 overview overview • inline power support (based on 802.3af standard) which eliminates power adapters. • ac power adapter (included) • enhanced busy lamp fields* • set paging* *availability of feature dependant on your phone system or service prov...

  • Page 28

    Handsfree key - activates handsfree for making and receiving calls without lifting the handset. When the audio mode option is set, this key is used to switch between a headset and the handsfree speakerphone. Mute key - mutes the microphone so that your caller cannot hear you (the light indicator fla...

  • Page 29: Overview

    Ip phone models 41-001160-00, release 2.1, rev 04 1-11 overview overview *see the aastra 55i user guide for more information about each of these keys. Softkeys - 6 bottom keys: programmable state-based softkeys (up to 20 programmable functions). By default, keys 1 through 6 have no assigned function...

  • Page 30: Overview

    Ip phone models 1-12 41-001160-00, release 2.1, rev 04 ip phone administrator guide overview model 57i and 57i ct ip phone this section provides brief information about the model 57i ip phone. It includes a list of features, and describes the hard keys and default softkeys on the 57i. 57i and 57i ct...

  • Page 31: Overview

    Ip phone models 41-001160-00, release 2.1, rev 04 1-13 overview overview • inline power support (based on 802.3af standard) which eliminates power adapters. • ac power adapter (included) • enhanced busy lamp fields* • set paging* *availability of feature dependant on your phone system or service pro...

  • Page 32: Overview

    Ip phone models 1-14 41-001160-00, release 2.1, rev 04 ip phone administrator guide overview handsfree key - activates handsfree for making and receiving calls without lifting the handset. When the audio mode option is set, this key is used to switch between a headset and the handsfree speakerphone....

  • Page 33: Overview

    Ip phone models 41-001160-00, release 2.1, rev 04 1-15 overview overview *see the aastra 57i or 57i ct user guide for more information about each of these keys. Softkeys - 12 softkeys on the 57i ip phone. - 6 top keys: programmable static softkeys (up to 10 programmable functions) - 6 bottom keys: p...

  • Page 34: Overview

    Ip phone models 1-16 41-001160-00, release 2.1, rev 04 ip phone administrator guide overview 57i ct cordless handset features • 5 line backlit display screen • 2 multi-functional softkeys • programmable function key supports up to 14 functions • vibration alerter • headset jack • desk charging stand...

  • Page 35: Overview

    Ip phone models 41-001160-00, release 2.1, rev 04 1-17 overview overview function # function description 5 softkeys activates feature or option shown on the display above the keys 6 call key used to obtain dial tone also used as a hold key 7 dial pad 8 mute key when used, prevents the caller from he...

  • Page 36: Overview

    Firmware installation information 1-18 41-001160-00, release 2.1, rev 04 ip phone administrator guide overview firmware installation information description the firmware setup and installation for the ip phone can be done using any of the following: • phone keypad menu (phone ui) • aastra web-based ...

  • Page 37: Overview

    Firmware installation information 41-001160-00, release 2.1, rev 04 1-19 overview overview installation requirements the following are general requirements for setting up and using your sip ip phone: • sip-based ip pbx system or network installed and running with a sip account created for the 53i ip...

  • Page 38: Overview

    Firmware installation information 1-20 41-001160-00, release 2.1, rev 04 ip phone administrator guide overview configuration server requirement a basic requirement for setting up the ip phone is to have a configuration server. The configuration server allows you to: • store the firmware images that ...

  • Page 39: Overview

    Firmware and configuration files 41-001160-00, release 2.1, rev 04 1-21 overview overview firmware and configuration files description when the ip phone is initialized for the first time, dhcp is enabled by default. Depending on the type of configuration server setup you may have, the ip phone may d...

  • Page 40: Overview

    Firmware and configuration files 1-22 41-001160-00, release 2.1, rev 04 ip phone administrator guide overview configuration file precedence aastra ip phones can accept two sources of configuration data: • the server configuration most recently downloaded/cached from the configuration server files, a...

  • Page 41: Overview

    Firmware and configuration files 41-001160-00, release 2.1, rev 04 1-23 overview overview installing the firmware/configuration files the following procedure describes how to install the firmware and configuration files. Step action 1 if dhcp is disabled, manually enter the configuration server’s ip...

  • Page 43: Chapter 2

    41-001160-00, release 2.1, rev 04 2-1 configuration interface methods chapter 2 configuration interface methods about this chapter introduction this chapter describes the methods you, as an administrator, can use to configure the ip phones. Topics this chapter covers the following topics: note: feat...

  • Page 44: Configuration Methods

    Configuration methods 2-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuration interface methods configuration methods description you can use the following to setup and configure the ip phone: • ip phone ui • aastra web ui • configuration files the following paragraphs descr...

  • Page 45

    Configuration methods 41-001160-00, release 2.1, rev 04 2-3 configuration interface methods configuration interface methods options key the options key allows you to access the "options list" on the ip phone. Accessible options in this list are for both user and administrator use. An administrator m...

  • Page 46

    Configuration methods 2-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuration interface methods using the options key from the 53i, 55i, or 57i/57i ct: from the 57i ct handset: step action 1 press on the phone to enter the options list. 2 use the r and s to scroll through th...

  • Page 47: Aastra Web Ui

    Configuration methods 41-001160-00, release 2.1, rev 04 2-5 configuration interface methods configuration interface methods aastra web ui an administrator can setup and configure the ip phone using the aastra web ui. The aastra web ui supports internet explorer and gecko engine-based browsers like f...

  • Page 48

    Configuration methods 2-6 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuration interface methods http/https client and server support the aastra ip phones allow for http request processing and associated data transfers to perform over a secure connection (https). The ip phone...

  • Page 49

    Configuration methods 41-001160-00, release 2.1, rev 04 2-7 configuration interface methods configuration interface methods using https via the aastra web ui https is enabled by default on the ip phones. When you open a browser window and enter an ip address or host name for a phone using http, a se...

  • Page 50

    Configuration methods 2-8 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuration interface methods accessing the aastra web ui use the following procedure to access the aastra web ui. Step action 1 open your web browser and enter the phone’s ip address or host name into the add...

  • Page 51

    Configuration methods 41-001160-00, release 2.1, rev 04 2-9 configuration interface methods configuration interface methods 2 enter your username and password and click . Note: for an administrator, the default username is “admin” and the password is “22222”. For a user, the default username is “use...

  • Page 52

    The following categories display in the side menu of the aastra web ui: status, operation, basic settings, advanced settings. Status the status section displays the network status and the mac address of the ip phone. It also displays hardware and firmware information about the ip phone. The informat...

  • Page 53

    Configuration methods 41-001160-00, release 2.1, rev 04 2-11 configuration interface methods configuration interface methods expansion module the 536m has up to 36 configurable keys. The 560m has up to 60 configurable keys. You can have up to 3 expansion modules attached to a single phone allowing y...

  • Page 54

    Configuration methods 2-12 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuration interface methods basic settings the basic settings section provides the following options: heading description preferences allows you to set the following general specifications on the ip phone. ...

  • Page 55

    Configuration methods 41-001160-00, release 2.1, rev 04 2-13 configuration interface methods configuration interface methods advanced settings the advanced settings section provides the following options: heading description network allows you to set basic network settings, advanced network settings...

  • Page 56

    Configuration methods 2-14 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuration interface methods enabling/disabling the aastra web ui the aastra web ui is enabled by default on the ip phones. A system administrator can disable the aastra web ui on a single phone or on all ph...

  • Page 57: Configuration Files (

    Configuration methods 41-001160-00, release 2.1, rev 04 2-15 configuration interface methods configuration interface methods configuration files ( administrator only ) a system administrator can enter specific parameters in the configuration files to configure the ip phones. All parameters in config...

  • Page 58

    Configuration methods 2-16 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuration interface methods configuration files step action 1 using a text-based editing application, open the configuration file for the phone, for which you want to configure the directory list (either aa...

  • Page 59: Administrator Options

    41-001160-00, release 2.1, rev 04 3-1 administrator options chapter 3 administrator options about this chapter introduction the ip phones provide specific options on the ip phone that only an administrator can access. These options are password protected and allow an administrator to change or set f...

  • Page 60: Administrator Options

    About this chapter 3-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options network settings page 3-31 line settings page 3-56 softkeys, programmable keys, expansion module keys page 3-57 action uri page 3-58 configuration server settings page 3-59 firmware update fea...

  • Page 61: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-3 administrator options administrator options administrator level options description there are options on the ip phone that both a user and administrator can access. However, there are specific options that an administrator can access ...

  • Page 62: Administrator Options

    Administrator level options 3-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options the following are administrator options in the "options list" on the ip phone ui: • administrator menu — configuration server — network settings — sip settings — factory default — era...

  • Page 63: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-5 administrator options administrator options simplified ip phone ui options menu an administrator can replace the existing options menu on the phone ui with a more simplified options menu. In the configuration files, the “options simpl...

  • Page 64: Administrator Options

    Administrator level options 3-6 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options configuring the simplified ip phone ui options menu you can enable the simplified ip phone ui options menu using the configurations files only. Configuration files for the specific pa...

  • Page 65: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-7 administrator options administrator options aastra web ui options an administrator can configure specific options using the aastra web ui. These options display after an administrator logs into the web ui using a web browser and enter...

  • Page 66: Administrator Options

    Administrator level options 3-8 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options the following are options that an administrator can configure in the aastra web ui (and are not available for the user to configure): • operation->reset — restore to factory defaults ...

  • Page 67: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-9 administrator options administrator options references for information about options available to a user and administrator in the aastra web ui, see your model-specific user guide. For procedures to restart your phone or restore facto...

  • Page 68: Administrator Options

    Administrator level options 3-10 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options phone status the phone status on the ip phone displays the network status and firmware version of the ip phone. You can display phone status using the ip phone ui or the aastra web u...

  • Page 69: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-11 administrator options administrator options • ip&mac addresses displays the ip address and mac address of the phone. • lan port displays the link state, negotiation method, speed, and duplex method that the phone uses on its lan port...

  • Page 70: Administrator Options

    Administrator level options 3-12 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options the following information displays for phone status in the aastra web ui at the location status->system information. This information is available to the user and the administrator a...

  • Page 71: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-13 administrator options administrator options restarting your phone as system administrator, there may be times when you need to restart a phone. The restart option allows you reboot the phone when required. A reset may be necessary wh...

  • Page 72: Administrator Options

    Administrator level options 3-14 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options restarting the phone using the aastra web ui aastra web ui 1 click on operation->reset->phone. 2 click to restart the phone..

  • Page 73: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-15 administrator options administrator options set phone to factory defaults/erase local configuration you can set phones to their factory default setting or remove a local phone’s configuration using the ip phone ui or the aastra web u...

  • Page 74: Administrator Options

    Administrator level options 3-16 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options settings factory defaults using the aastra web ui aastra web ui step action 1 click on operation->reset->current settings. 2 in the "restore to factory defaults" field, click . This ...

  • Page 75: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-17 administrator options administrator options erasing the phone’s local configuration you can reset the ip phone’s local configuration if required. The local configuration is the last updated configuration you performed using the ip ph...

  • Page 76: Administrator Options

    Administrator level options 3-18 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options erasing the phone’s local configuration using the aastra web uii aastra web ui step action 1 click on operation->reset->current settings. 2 in the "remove local configuration setting...

  • Page 77: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-19 administrator options administrator options basic settings an administrator has access to specific basic setting options to configure and manage the ip phone in the network. The following sections identify the options available to an...

  • Page 78: Administrator Options

    Administrator level options 3-20 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options park call note: this option can be set by both users and administrators. Sprecode the parking of a live call to a specific extension. This feature on the basic preferences screen is ...

  • Page 79: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-21 administrator options administrator options play call waiting tone note: this option can be set by both users and administrators. Call waiting tone enable or disables the playing of a call waiting tone when a caller is on an active c...

  • Page 80: Administrator Options

    Administrator level options 3-22 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options incoming/outgoing intercom calls the incoming/outgoing intercom call settings on the ip phone specify whether the ip phone or the server is responsible for notifying the recipient th...

  • Page 81: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-23 administrator options administrator options microphone mute note: this option can be set by both users and administrators. Sip intercom mute mic enables or disables the microphone on the ip phone for intercom calls made by the origin...

  • Page 82: Administrator Options

    Administrator level options 3-24 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options prefix code sip intercom prefix code the prefix to add to the phone number for server-side outgoing intercom calls. This parameter is required for all server-side intercom calls. For...

  • Page 83: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-25 administrator options administrator options key mapping parameter in aastra web ui parameter in configuration files description map redial key to map redial key to sets the redial key as a speeddial key if a value is entered for this...

  • Page 84: Administrator Options

    Administrator level options 3-26 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options ring tones priority alerting settings parameter in ip phone ui parameter in aastra web ui parameter in configuration files description tone set note: this option can be set by both u...

  • Page 85: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-27 administrator options administrator options external alert external when an "alert external" keyword appears in the header of the invite request, the configured bellcore ring tone is applied to the ip phone. For more information on t...

  • Page 86: Administrator Options

    Administrator level options 3-28 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options directed call pickup (dcp) parameter in aastra web ui parameters in configuration files description directed call pickup directed call pickup enables or disables the use of "directed...

  • Page 87: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-29 administrator options administrator options auto call distribution (acd) settings time and date parameter in aastra web ui parameters in configuration files description auto available acd auto available enables or disables the use of...

  • Page 88: Administrator Options

    Administrator level options 3-30 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options language parameter in aastra web ui parameter in configuration files description webpage language note: this option can be set by both users and administrators. Language the language...

  • Page 89: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-31 administrator options administrator options network settings the following paragraphs describe the network parameters you can configure on the ip phone. Network settings are in two categories: • basic network settings • advanced netw...

  • Page 90: Administrator Options

    Administrator level options 3-32 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options basic network settings if dynamic host configuration protocol (dhcp) is enabled, the ip phone automatically configures all of the network settings. If the phone cannot populate the n...

  • Page 91: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-33 administrator options administrator options subnet mask subnet mask subnet mask subnet mask defines the ip address range local to the ip phone. To assign a static subnet mask, disable dhcp. For more information, see “configuring netw...

  • Page 92: Administrator Options

    Administrator level options 3-34 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options secondary dns secondary dns dns2 a service that translates domain names into ip addresses. To assign static dns addresses, disable dhcp. For more information, see “configuring networ...

  • Page 93: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-35 administrator options administrator options advanced network settings parameter in ip phone ui parameter in aastra web ui parameters in configuration files description upnp upnp upnp manager enables or disables universal plug and pla...

  • Page 94: Administrator Options

    Administrator level options 3-36 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options nat rtp port nat rtp port sip nat rtp port indicates the port through which the rtp packets are sent. This value must specify the beginning of the rtp port range on the gateway or ro...

  • Page 95: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-37 administrator options administrator options n/a ntp time servers time server disabled enables or disables the time server. This parameter affects the time server1, time server2, and time server3 parameters. Setting this parameter to ...

  • Page 96: Administrator Options

    Administrator level options 3-38 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options https https server - redirect http to https https redirect http get allows or disallows redirection from the http server to the https server. For more information, see chapter 4, “ht...

  • Page 97: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-39 administrator options administrator options type of service (tos), dscp (53i) networks settings include type of service (tos) and differentiated services code point (dscp) for the 53i ip phone. Parameter in ip phone ui parameter in a...

  • Page 98: Administrator Options

    Administrator level options 3-40 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options vlan you can enable or disable vlan and set specific vlan ids and priorities under network settings. Parameter in ip phone ui parameter in aastra web ui parameters in configuration f...

  • Page 99: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-41 administrator options administrator options sip priority rtp priority rtcp priority sip priority rtp priority rtcp priority tos priority map this parameter is based on the type of service (tos), differentiated services code point (ds...

  • Page 100: Administrator Options

    Administrator level options 3-42 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options pc port settings (port 1) pc port vlan id vlan id vlan id port 1 specifies the vlan id used to pass packets through to a pc via port 1. Note: if you set the pc port vlan id (port 1) ...

  • Page 101: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-43 administrator options administrator options sip settings the following paragraphs describe the sip parameters you can configure on the ip phone. Sip configuration consists of configuring: • basic sip authentication settings • basic s...

  • Page 102: Administrator Options

    Administrator level options 3-44 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options user name phone number sip user name (global) sip linen user name (per-line) user name used in the name field of the sip uri for the ip phone and for registering the phone at the reg...

  • Page 103: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-45 administrator options administrator options n/a bla number sip bla number (global) sip linen bla number (per-line) phone number that you assign to bla lines that is shared across all phones (global configuration) or shared on a per-l...

  • Page 104: Administrator Options

    Administrator level options 3-46 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options basic sip network settings parameter in ip phone ui parameter in aastra web ui parameters in configuration files description proxy server proxy server sip proxy ip (global) sip linen...

  • Page 105: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-47 administrator options administrator options n/a outbound proxy server sip outbound proxy server (global) sip linen outbound proxy server (per-line) address of the outbound proxy server. All sip messages originating from the phone are...

  • Page 106: Administrator Options

    Administrator level options 3-48 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options n/a backup registrar server sip backup registrar ip (global) sip linen backup registrar ip (per-line) the address of the backup registrar (typically, the backup sip proxy) for which ...

  • Page 107: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-49 administrator options administrator options advanced sip settings in addition to the basic sip settings, you can also configure the following advanced sip parameters. These parameters are configurable via the aastra web ui and the co...

  • Page 108: Administrator Options

    Administrator level options 3-50 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options missed call summary subscription period sip missed call summary subscription period specifies the amount of time, in seconds, that the phone uses the missed calls summary subscriptio...

  • Page 109: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-51 administrator options administrator options timer 1 and timer 2 sip t1 timer sip t2 timer the requested duration, in seconds, before the mwi subscription times out. The phone re-subscribes to mwi before the subscription period ends. ...

  • Page 110: Administrator Options

    Administrator level options 3-52 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options registration renewal timer sip registration renewal timer the requested duration, in seconds, before the mwi subscription times out. The phone re-subscribes to mwi before the subscri...

  • Page 111: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-53 administrator options administrator options blacklist duration sip blacklist duration specifies the length of time, in seconds, that a failed server remains on the server blacklist. The ip phone avoids sending a sip message to a fail...

  • Page 112: Administrator Options

    Administrator level options 3-54 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options rtp settings you can configure the following rtp settings. Parameter in ip phone ui parameter in aastra web ui parameters in configuration files description rtp port base rtp port si...

  • Page 113: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-55 administrator options administrator options n/a customized codec preference list sip customized codec specifies a customized codec preference list which allows you to use the preferred codecs for this ip phone. For more information, ...

  • Page 114: Administrator Options

    Administrator level options 3-56 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options line settings an administrator can configure multiple lines on the ip phone with the same sip network configuration (global) or a different sip network configuration (per-line). The ...

  • Page 115: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-57 administrator options administrator options softkeys, programmable keys, expansion module keys a user or administrator can assign specific functions to softkeys, programmable keys, or expansion module keys. The available keys for con...

  • Page 116: Administrator Options

    Administrator level options 3-58 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options action uri the ip phones have a feature that allows an administrator to specify a uniform resource identifier (uri) that triggers a get when certain xml events occur. The ip phone xm...

  • Page 117: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-59 administrator options administrator options configuration server settings the configuration server stores the firmware images, configuration files, and software when performing software upgrades to the ip phone. An administrator can ...

  • Page 118: Administrator Options

    Administrator level options 3-60 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options alternate tftp alternate tftp alternate tftp server the alternate tftp server’s ip address or qualified domain name. This will become effective after this configuration file has been...

  • Page 119: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-61 administrator options administrator options ftp password ftp password ftp password the password to enter for accessing the ftp server. This will become effective after this configuration file has been downloaded into the phone. For m...

  • Page 120: Administrator Options

    Administrator level options 3-62 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options download server https server https server the https server’s ip address. This will become effective after this configuration file has been downloaded into the phone. Optional: you ca...

  • Page 121: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-63 administrator options administrator options auto-resync settings n/a mode auto resync mode enables and disables the phone to be updated automatically once a day at a specific time in a 24-hour period. This parameter works with tftp, ...

  • Page 122: Administrator Options

    Administrator level options 3-64 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options n/a time (24-hour) auto resync time sets the time of day in a 24-hour period for the ip phone to be automatically updated. This parameter works with tftp, ftp, and http servers. Note...

  • Page 123: Administrator Options

    Administrator level options 41-001160-00, release 2.1, rev 04 3-65 administrator options administrator options xml push server list (approved ip addresses) n/a xml push server list (approved ip addresses) xml application post list the http server that is pushing xml applications to the ip phone. For...

  • Page 124: Administrator Options

    Administrator level options 3-66 41-001160-00, release 2.1, rev 04 ip phone administrator guide administrator options firmware update features the ip phone uses a tftp, ftp, http, or https server (depending on the protocol configured on the ip phone) to download configuration files and firmware. You...

  • Page 125: Configuring The Ip Phones

    41-001160-00, release 2.1, rev 04 4-1 configuring the ip phones chapter 4 configuring network and session initiation protocol (sip) features about this chapter introduction this chapter provides the information required to configure the network and global sip features on the ip phone. These features...

  • Page 126: Configuring The Ip Phones

    About this chapter 4-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones global sip settings page 4-45 basic sip settings page 4-46 advanced sip settings (optional) page 4-58 real-time transport protocol (rtp) settings page 4-64 autodial settings page 4-74 conf...

  • Page 127: Configuring The Ip Phones

    Overview 41-001160-00, release 2.1, rev 04 4-3 configuring network and session initiation protocol (sip) features configuring the ip phones overview an administrator can configure the ip phone network and sip options from the phone ui, from the aastra web ui, or the configuration files. Administrato...

  • Page 128: Configuring The Ip Phones

    Network settings 4-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones network settings this section describes the basic network settings on the ip phone which include configuring for: • dhcp • ip address (of phone) • subnet mask (of phone) • gateway • primary ...

  • Page 129: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-5 configuring network and session initiation protocol (sip) features configuring the ip phones • http server • https server the network administrator chooses which of these parameters (if any) are supplied to the ip phone by the dhcp server. The a...

  • Page 130: Configuring The Ip Phones

    Network settings 4-6 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones dns caching the ip phones have the ability to cache dns requests according to rfc1035 and rfc2181. The phone caches dns lookups according to the ttl field, so that the phone only performs an...

  • Page 131: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-7 configuring network and session initiation protocol (sip) features configuring the ip phones ip phone ui step action 1 press on the phone to enter the options list. 2 select administrator menu. 3 enter your administrator password. Note: the ip p...

  • Page 132: Configuring The Ip Phones

    Network settings 4-8 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones . Configuring network settings manually if you disable dhcp on your phone, you need to configure the following network settings manually: • ip address • subnet mask • gateway • primary dns a...

  • Page 133: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-9 configuring network and session initiation protocol (sip) features configuring the ip phones • secondary dns you can configure the network settings using the configuration files, the ip phone ui, or the aastra web ui. Note: if you disable dhcp o...

  • Page 134: Configuring The Ip Phones

    Network settings 4-10 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->basic network settings. 2 enter an ip address of the phone in the ip address field. 3 enter a subnet mask in the subnet ma...

  • Page 135: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-11 configuring network and session initiation protocol (sip) features configuring the ip phones configuring lan and pc port negotiation ethernet is the computer networking technology for local area networks (lans). You use the lan port to connect ...

  • Page 136: Configuring The Ip Phones

    Network settings 4-12 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones full-duplex (10mbps or 100mbps) full-duplex data transmission means that data can be transmitted in both directions on a signal carrier at the same time. For example, on a lan with a techno...

  • Page 137: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-13 configuring network and session initiation protocol (sip) features configuring the ip phones 7 select a negotiation method to use on port 0 and press done. Valid values are: • autonegotiation • fullduplex 10mbps • fullduplex 100mbps • halfduple...

  • Page 138: Configuring The Ip Phones

    Network settings 4-14 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones aastra web ui step action 1 click on advanced settings->network->basic network settings. 2 in the “lan port” field, select a negotiation method to use on port 0. Valid values are: • auto ne...

  • Page 139: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-15 configuring network and session initiation protocol (sip) features configuring the ip phones 3 in the “pc port” field, select a negotiation method to use on port 1. Valid values are: • auto negotiation • full duplex, 10mbps • full duplex, 100mb...

  • Page 140: Configuring The Ip Phones

    Network settings 4-16 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones advanced network settings you can set advanced network settings on the ip phone such as, network address translation (nat), nortel nat, network time protocol (ntp) time servers, virtual lan...

  • Page 141: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-17 configuring network and session initiation protocol (sip) features configuring the ip phones nortel proxy/registrar the phone at ip address 10.10.10.10 is configured to register with the proxy at 63.251.195.10. Because it is a nortel proxy, the...

  • Page 142: Configuring The Ip Phones

    Network settings 4-18 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones nortel networks nat nortel networks provides a proprietary solution to support connectivity to their proxies from phones placed behind devices (such as routers or firewalls) that use nat. N...

  • Page 143: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-19 configuring network and session initiation protocol (sip) features configuring the ip phones ip phone ui step action 1 press on the phone to enter the options list. 2 select administrator menu. 3 enter your administrator password. Note: the ip ...

  • Page 144: Configuring The Ip Phones

    Network settings 4-20 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->advanced network settings. 2 select yes (enable) or no (disable) in the "nortel nat traversal enabled" field to enable or ...

  • Page 145: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-21 configuring network and session initiation protocol (sip) features configuring the ip phones configuring nat address and port (optional) you can also configure a specific nat address and port on the ip phone using the configuration files, ip ph...

  • Page 146: Configuring The Ip Phones

    Network settings 4-22 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->advanced network settings. 2 enter a nat ip address in the "nat ip" field. The value must be entered in dotted decimal for...

  • Page 147: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-23 configuring network and session initiation protocol (sip) features configuring the ip phones https client/server configuration https is a web protocol that encrypts and decrypts user page requests as well as the pages that are returned by the w...

  • Page 148: Configuring The Ip Phones

    Network settings 4-24 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones the https server provides http functionality over secure connections. It coexists with the http server but has its own set of tasks. The main https server functions are: • delivery of web p...

  • Page 149: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-25 configuring network and session initiation protocol (sip) features configuring the ip phones ip phone ui step action 1 press on the phone to enter the options list. 2 select administrator menu. 3 enter your administrator password. Note: the ip ...

  • Page 150: Configuring The Ip Phones

    Network settings 4-26 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->advanced network settings . 2 select an https client method to use from the https client method field. Valid values are: s...

  • Page 151: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-27 configuring network and session initiation protocol (sip) features configuring the ip phones universal plug and play (upnp) (for remote phones) upnp is a standard that uses internet protocols to enable devices to be plugged into a network and a...

  • Page 152: Configuring The Ip Phones

    Network settings 4-28 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones you can enable upnp on remote ip phones using the configuration files, the ip phone ui, or the aastra web ui. Using the configuration files, you can enable upnp using the following paramete...

  • Page 153: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-29 configuring network and session initiation protocol (sip) features configuring the ip phones ip phone ui step action 1 press on the phone to enter the options list. 2 select administrator menu. 3 enter your administrator password. Note: the ip ...

  • Page 154: Configuring The Ip Phones

    Network settings 4-30 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->advanced network settings . 2 the “upnp” field is disabled by default. To enable upnp, place a check in the “enabled” box....

  • Page 155: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-31 configuring network and session initiation protocol (sip) features configuring the ip phones virtual lan (optional) virtual local area network (vlan) is a feature on the ip phone that allows for multiple logical ethernet interfaces to send outg...

  • Page 156: Configuring The Ip Phones

    Network settings 4-32 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones the following parameters allow an administrator to configure tos, qos, and diffserv qos for vlan: parameters in configuration files parameters in aastra web ui global tagging enabled vlan e...

  • Page 157: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-33 configuring network and session initiation protocol (sip) features configuring the ip phones dscp range/vlan priority mapping dscp bits in the tos field of the ip header are set for rtp, rtcp, and sip packets using either the default values or ...

  • Page 158: Configuring The Ip Phones

    Network settings 4-34 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones the following table identifies the default dscp of protocols. Configuring type of service (tos)/dscp (optional) use the following procedures to configure tos/dscp on the ip phone. Protocol ...

  • Page 159: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-35 configuring network and session initiation protocol (sip) features configuring the ip phones 6 select type of service sip. Or select type of service rtp. Or select type of service rtcp. 7 enter a value for “type of service sip”. Default is 26. ...

  • Page 160: Configuring The Ip Phones

    Network settings 4-36 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->type of service,dscp . 2 select a protocol field: • “sip” or • “rtp” or • “rtcp” 3 enter a value from 0 to 63. Default val...

  • Page 161: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-37 configuring network and session initiation protocol (sip) features configuring the ip phones configuring vlan (optional) use the following procedures to configure vlan on the ip phone. Note: vlan is disabled by default. When you enable vlan, th...

  • Page 162: Configuring The Ip Phones

    Network settings 4-38 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones to set vlan id and priority for lan port (port 0): 13 select phone vlan. 14 select phone vlan id and enter a value from 1 to 4094 to specify the vlan id for the lan port. Default is 1. 15 p...

  • Page 163: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-39 configuring network and session initiation protocol (sip) features configuring the ip phones 23 press done to save the change. 24 select pc port priority. 25 select a pc port vlan priority value from 0 to 7 for the pc port. Default is 0.. 26 pr...

  • Page 164: Configuring The Ip Phones

    Network settings 4-40 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones . Aastra web ui step action 1 click on advanced settings->network->vlan. To globally enable/disable vlan and set priority for non-ip packets: 2 enable vlan by checking the vlan enable field...

  • Page 165: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-41 configuring network and session initiation protocol (sip) features configuring the ip phones to set vlan id and priority for the pc port (port 1): 6 enter a vlan id value from 1 to 4095 in the vlan id field. Default is 0. Note: if you set the p...

  • Page 166: Configuring The Ip Phones

    Network settings 4-42 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones network time servers network time protocol (ntp) is a protocol that the ip phone uses to synchronize the phone clock time with a computer (configuration server) in the network. To use ntp, ...

  • Page 167: Configuring The Ip Phones

    Network settings 41-001160-00, release 2.1, rev 04 4-43 configuring network and session initiation protocol (sip) features configuring the ip phones use the following procedure to enable/disable and configure the ntp servers using the aastra web ui. 8 enter the ip address (in dotted decimal) or qual...

  • Page 168: Configuring The Ip Phones

    Network settings 4-44 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones 3 enter an ip address or qualified domain name in the "time server 1", "time server 2", and/or "time server 3" field(s) to specify the location of the ntp time server. 4 click to save your ...

  • Page 169: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-45 configuring network and session initiation protocol (sip) features configuring the ip phones global sip settings description the ip phone uses the information in the global session initiation protocol (sip) settings to register at the ip pbx...

  • Page 170: Configuring The Ip Phones

    Global sip settings 4-46 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones basic sip settings the following tables identify the sip global and per-line, authentication and network parameters on the ip phones. Sip global parameters reference for more information...

  • Page 171: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-47 configuring network and session initiation protocol (sip) features configuring the ip phones sip per-line parameters reference for more information about centralized conferencing, see chapter 5, the section, “centralized conferencing (for sy...

  • Page 172: Configuring The Ip Phones

    Global sip settings 4-48 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones for example, if a parameter value is configured for one of the per-line sets, all parameters from that set are applied and all parameters from the corresponding global section are ignore...

  • Page 173: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-49 configuring network and session initiation protocol (sip) features configuring the ip phones backup proxy/registrar support the ip phones support a backup sip proxy and backup sip registrar feature. If the primary server is unavailable, the ...

  • Page 174: Configuring The Ip Phones

    Global sip settings 4-50 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones you can configure srv lookup using the configuration files (aastra.Cfg and .Cfg) only. The parameters to use are: • sip proxy ip • sip proxy port configuring basic sip network settings (...

  • Page 175: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-51 configuring network and session initiation protocol (sip) features configuring the ip phones ip phone ui step action 1 press on the phone to enter the options list. 2 select administrator menu. 3 enter your administrator password. Note: the ...

  • Page 176: Configuring The Ip Phones

    Global sip settings 4-52 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones 16 select user name to enter the username in the name field of the sip uri for the ip phone, and for registering the phone at the registrar. Note: the ip phones allow usernames containin...

  • Page 177: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-53 configuring network and session initiation protocol (sip) features configuring the ip phones . Aastra web ui step action 1 for global configuration, click on advanced settings->global sip->basic sip settings..

  • Page 178: Configuring The Ip Phones

    Global sip settings 4-54 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones or, for per-line configuration, click on advanced settings->line n (1-9) . To configure sip authentication settings: 2 in the "screen name" field, enter the screen name that displays on ...

  • Page 179: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-55 configuring network and session initiation protocol (sip) features configuring the ip phones 3 in the "screen name 2" field, enter the text you want to display on the phone under the “screen name” on the idle screen. Notes: 1. If other statu...

  • Page 180: Configuring The Ip Phones

    Global sip settings 4-56 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones 9 in the "line mode" field, select "generic" for normal mode, "broadsoft sca" for a broadworks network, or "nortel" for a nortel network. To configure sip network settings: 10 in the "pr...

  • Page 181: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-57 configuring network and session initiation protocol (sip) features configuring the ip phones 21 to enter a value in the “conference server uri” field, see chapter 5, the section, “centralized conferencing (for sylantro and broadsoft servers)...

  • Page 182: Configuring The Ip Phones

    Global sip settings 4-58 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones advanced sip settings (optional) advanced sip settings on the ip phone allow you to configure specific features on the phone. The following table provides a list of advanced sip settings...

  • Page 183: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-59 configuring network and session initiation protocol (sip) features configuring the ip phones reference refer to appendix a, “advanced sip settings” on page a-62 for a description of each of the above parameters. For more information about bl...

  • Page 184: Configuring The Ip Phones

    Global sip settings 4-60 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones . Aastra web ui step action for global configuration, click on advanced settings->global sip->advanced sip settings. 1 or for per-line configuration, click on advanced settings->line n (...

  • Page 185: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-61 configuring network and session initiation protocol (sip) features configuring the ip phones 2 enable the "explicit mwi subscription" field by checking the check box. (disable this field by unchecking the check box. Default is disabled). If ...

  • Page 186: Configuring The Ip Phones

    Global sip settings 4-62 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones 9 in the "transaction timer" field, enter the amount of time, in milliseconds, that the phone allows the call server (registrar/proxy) to respond to sip messages that it sends. Valid val...

  • Page 187: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-63 configuring network and session initiation protocol (sip) features configuring the ip phones 16 (for broadsoft servers) the “blacklist duration” field is enabled by default with a value of 300 seconds (5 minutes). Valid values are 0 to 99999...

  • Page 188: Configuring The Ip Phones

    Global sip settings 4-64 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones real-time transport protocol (rtp) settings real-time transport protocol (rtp) is used as the bearer path for voice packets sent over the ip network. Information in the rtp header tells ...

  • Page 189: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-65 configuring network and session initiation protocol (sip) features configuring the ip phones rtp port rtp is described in rfc1889. The udp port used for rtp streams is traditionally an even-numbered port, and the rtcp control is on the next ...

  • Page 190: Configuring The Ip Phones

    Global sip settings 4-66 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones all codecs have a sampling rate of 8,000 samples per second, and operate and operate in the 300 hz to 3,700 hz audio range. The following table lists the default settings for bit rate, a...

  • Page 191: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-67 configuring network and session initiation protocol (sip) features configuring the ip phones silsupp is used to enable or disable silence suppression. Voice activity detection (vad) on the ip phones is used to determine whether each individu...

  • Page 192: Configuring The Ip Phones

    Global sip settings 4-68 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones dtmf method a feature on the ip phone allows you to select the dtmf method that the phone uses to send dtmf digits from the ip phone via info messages. You can set the dtmf method as rea...

  • Page 193: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-69 configuring network and session initiation protocol (sip) features configuring the ip phones if an srtp enabled ip phone initiates a call, and the receiving phone is also srtp enabled, the ip phone ui displays a “lock” icon, indicating that ...

  • Page 194: Configuring The Ip Phones

    Global sip settings 4-70 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones configuring rtp features use the following procedures to configure the rtp features on the ip phone. Configuration files for specific parameters you can set for rtp features in the confi...

  • Page 195: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-71 configuring network and session initiation protocol (sip) features configuring the ip phones . Aastra web ui step action 1 click on advanced settings->global sip->rtp settings. Global settings..

  • Page 196: Configuring The Ip Phones

    Global sip settings 4-72 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones click on advanced settings->line ->rtp settings. Per-line settings. 2 enter an rtp port base in the rtp port field. Default is 3000. The rtp port indicates the port through which the rtp...

  • Page 197: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-73 configuring network and session initiation protocol (sip) features configuring the ip phones 5 enter a "customized codec preference list". For example, payload=8;ptime=10; silsupp=on; payload=0;ptime=10; silsupp=off valid values are: for thi...

  • Page 198: Configuring The Ip Phones

    Global sip settings 4-74 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones autodial settings the ip phones include a feature called “autodial”. When you configure autodial on an ip phone, the phone automatically dials a preconfigured number whenever it is off-h...

  • Page 199: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-75 configuring network and session initiation protocol (sip) features configuring the ip phones configuring autodial using the configuration files you use the following parameters to configure autodial using the configuration files: global conf...

  • Page 200: Configuring The Ip Phones

    Global sip settings 4-76 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones configuring autodial using the aastra web ui use the following procedure to configure autodial using the aastra web ui. By default, your ip phone uses the global settings you specify for...

  • Page 201: Configuring The Ip Phones

    Global sip settings 41-001160-00, release 2.1, rev 04 4-77 configuring network and session initiation protocol (sip) features configuring the ip phones 3 in the “autodial timeout” field, specify a value, in seconds, for the timer as follows: • if you want the ip phone to autodial the number immediat...

  • Page 202: Configuring The Ip Phones

    Global sip settings 4-78 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones 2 do one of the following actions: • to allow this line to use the global autodial settings, click on the use global settings parameter to enable it, then click to save your changes. • t...

  • Page 203: Configuring The Ip Phones

    Configuration server protocol 41-001160-00, release 2.1, rev 04 4-79 configuring network and session initiation protocol (sip) features configuring the ip phones configuration server protocol you can download new versions of firmware and configuration files from the configuration server to the ip ph...

  • Page 204: Configuring The Ip Phones

    Configuration server protocol 4-80 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones 6 select from the following: • use tftp • use ftp • use http • use https default is “use tftp”. The ip phone uses the protocol you select to download new firmware and configura...

  • Page 205: Configuring The Ip Phones

    Configuration server protocol 41-001160-00, release 2.1, rev 04 4-81 configuring network and session initiation protocol (sip) features configuring the ip phones 9 enter the ip address of the protocol server (in dotted decimal format). Use the following table to configure the applicable server. Ip p...

  • Page 206: Configuring The Ip Phones

    Configuration server protocol 4-82 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones 9 (cont’d) reference: for more information on configuring the https security method, http to https redirect, and https server blocking for http xml posts, see the section, “htt...

  • Page 207: Configuring The Ip Phones

    Configuration server protocol 41-001160-00, release 2.1, rev 04 4-83 configuring network and session initiation protocol (sip) features configuring the ip phones aastra web ui step action 1 click on advanced settings->configuration server..

  • Page 208: Configuring The Ip Phones

    Configuration server protocol 4-84 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones 2 select the protocol from the "download protocol" list box. Valid values are tftp, ftp, http, and https. Default is tftp. The ip phone uses the protocol you select to download...

  • Page 209: Configuring The Ip Phones

    Configuration server protocol 41-001160-00, release 2.1, rev 04 4-85 configuring network and session initiation protocol (sip) features configuring the ip phones 3 click to save your settings. Note: the session prompts you to restart the ip phone to apply the configuration settings. 4 select operati...

  • Page 210: Configuring The Ip Phones

    Configuration server protocol 4-86 41-001160-00, release 2.1, rev 04 ip phone administrator guide configuring the ip phones.

  • Page 211: Chapter 5

    41-001160-00, release 2.1, rev 04 5-1 operational ip phone features chapter 5 configuring operational features about this chapter introduction the ip phones have specific operational features you can configure to customize your ip phone. This chapter describes each feature and provides procedures fo...

  • Page 212

    About this chapter 5-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features call waiting/call waiting tone page 5-43 stuttered dial tone page 5-46 xml beep support page 5-48 status scroll delay page 5-50 incoming call interrupts dialing page 5-52 goodbye key c...

  • Page 213

    About this chapter 41-001160-00, release 2.1, rev 04 5-3 configuring operational features operational ip phone features xml customized services page 5-196 audio transmit and receive gain adjustments page 5-218 centralized conferencing (for sylantro and broadsoft servers) page 5-220 customizing the d...

  • Page 214: Operational Features

    Operational features 5-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features operational features description this section describes the operational features managed and configured by a system administrator. User passwords a user or an administrator can chang...

  • Page 215

    Operational features 41-001160-00, release 2.1, rev 04 5-5 configuring operational features operational ip phone features 5 enter the new user password. Note: the ip phones support numeric characters only in passwords. If you enter a password with alpha characters, the phone uses the default passwor...

  • Page 216

    Operational features 5-6 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features resetting a user password if a user forgets his password, either the user or an administrator can reset it so a new password can be entered. The reset user password feature resets th...

  • Page 217

    Operational features 41-001160-00, release 2.1, rev 04 5-7 configuring operational features operational ip phone features 2 in the “reset user password” field, click . The following screen displays: 3 in the “current password” field, leave this blank. 4 in the “new password” field, enter a new passw...

  • Page 218: Administrator Passwords

    Operational features 5-8 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features administrator passwords an administrator can change the administrator passwords on the phone using the configuration files only. An administrator can also assign a password for using...

  • Page 219: Locking/unlocking The Phone

    Operational features 41-001160-00, release 2.1, rev 04 5-9 configuring operational features operational ip phone features locking/unlocking the phone a user or administrator can lock a phone to prevent it from being used or configured. Once the phone is locked, the user or administrator can enter th...

  • Page 220

    Operational features 5-10 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features locking/unlocking the phone using the ip phone ui use the following ip phone ui procedure to lock/unlock an ip phone and prevent it from being used or configured. Ip phone ui step a...

  • Page 221

    Operational features 41-001160-00, release 2.1, rev 04 5-11 configuring operational features operational ip phone features locking/unlocking the phone using the aastra web ui use the following aastra web ui procedure to lock/unlock an ip phone and prevent it from being used or configured. Aastra web...

  • Page 222

    Operational features 5-12 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features configuring a lock/unlock key using the configuration files using the configuration files, you can configure a key on the phone (softkey, programmable key, or expansion module key) ...

  • Page 223

    Operational features 41-001160-00, release 2.1, rev 04 5-13 configuring operational features operational ip phone features configuring a lock/unlock key using the aastra web ui using the aastra web ui, you can configure a key on the phone (softkey, programmable key, expansion module key) to use as a...

  • Page 224

    Operational features 5-14 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features using the configured lock/unlock key on the ip phone after configuring a key as a lock/unlock key, refer to the following procedure to use the key on the ip phone. 3 in the “type” f...

  • Page 225

    Operational features 41-001160-00, release 2.1, rev 04 5-15 configuring operational features operational ip phone features defining an emergency dial plan public telephone networks in countries around the world have a single emergency telephone number (emergency services number), that allows a calle...

  • Page 226

    Operational features 5-16 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features configuring an emergency dial plan use the following procedures to specify the numbers to use on your phone for dialing emergency services in your area. Configuration files for spec...

  • Page 227: Time and Date

    Operational features 41-001160-00, release 2.1, rev 04 5-17 configuring operational features operational ip phone features time and date in addition to enabling/disabling the time server, you can also set the time and date, set the time and date format, set the time zone, and set daylight savings ti...

  • Page 228

    Operational features 5-18 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features use the following procedures to set a time and date, time and date format, time zone, and daylight savings time on the ip phones. Configuration files for specific parameters you can...

  • Page 229

    Operational features 41-001160-00, release 2.1, rev 04 5-19 configuring operational features operational ip phone features 13 selecta date format from the list of options. Valid values are: • www mmm dd (default) • dd-mmm-yy • yyyy-mm-dd • dd/mm/yyyy • dd/mm/yy • dd-mm-yy • mm/dd/yy • mmm dd note: t...

  • Page 230

    Operational features 5-20 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->preferences->time and date setting. 2 in the “time format” field, select the time format you want to use on your phone. Valid values are: • ...

  • Page 231: Language

    Operational features 41-001160-00, release 2.1, rev 04 5-21 configuring operational features operational ip phone features language the ip phones support several different languages. You can have the ip phone ui and the aastra web ui display in a specific language as required. When you set the langu...

  • Page 232

    Operational features 5-22 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features example the following is an example of the parameters you would enter in the .Cfg file to load a french, italian, german, and spanish language pack to the ip phone. Language 1: lang...

  • Page 233

    Operational features 41-001160-00, release 2.1, rev 04 5-23 configuring operational features operational ip phone features loading language packs via the aastra web ui using the aastra web ui, you can specify a language pack to load using the parameters at basic settings->preferences->language setti...

  • Page 234

    Operational features 5-24 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features specifying the language to use once the language pack(s) have loaded, you must then specify which language to use on the phone. After the phone has booted up, you can specify which ...

  • Page 235

    Operational features 41-001160-00, release 2.1, rev 04 5-25 configuring operational features operational ip phone features ip phone ui step action 1 press on the phone to enter the options list. 2 select language. 3 select english (english), français (french), español (spanish), deutsch (german), it...

  • Page 236

    Operational features 5-26 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->preferences->language settings. Loading the language pack 2 in the “language n” fields, enter the file name of the language pack you want to...

  • Page 237

    Operational features 41-001160-00, release 2.1, rev 04 5-27 configuring operational features operational ip phone features 6 in the “webpage language” field, select a language to apply to the aastra web ui. The ip phone supports the following languages: • english (default) • french (canadian) • span...

  • Page 238: Locking Ip Phone Keys

    Operational features 5-28 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features locking ip phone keys the ip phones allow you to lock or unlock programmable keys, softkeys, hard keys, cordless handset keys, and expansion keys (for expansion modules). When key l...

  • Page 239

    Operational features 41-001160-00, release 2.1, rev 04 5-29 configuring operational features operational ip phone features locking the ip phone keys use the following procedures to lock the softkeys and programmable keys on the ip phone. Reference for more information about locking/unlocking the pho...

  • Page 240: Local Dial Plan

    Operational features 5-30 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features local dial plan a dial plan describes the number and pattern of digits that a user dials to reach a particular telephone number. Access codes, area codes, specialized codes, and com...

  • Page 242

    Operational features 5-32 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features example if you enter the following dial string for a local dial plan: sip dial plan: 1+#,9 where “9” is the prepended digit, and you dial the following number: 15551212 the ip phone...

  • Page 243

    Operational features 41-001160-00, release 2.1, rev 04 5-33 configuring operational features operational ip phone features configuring the sip local dial plan, dial plan terminator, and digit timeout use the following procedures to configure the sip local dial plan using the configuration files or t...

  • Page 244

    Operational features 5-34 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features 4 in the "digit timeout (in seconds)" field, enter a timeout value. This is the length of time, in seconds, he phone waits before dialing. Default is 4 seconds. 5 click to save your...

  • Page 245

    Operational features 41-001160-00, release 2.1, rev 04 5-35 configuring operational features operational ip phone features park calls/pick up parked calls the ip phones (including the 57i ct handset) have a park and pickup call feature that allows you to park a call and pickup a call when required. ...

  • Page 246

    Operational features 5-36 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features in the aastra web ui, you use the following fields at basic settings-> preferences to configure park/pickup statically: • park call • pickup call how it displays on the phone on the...

  • Page 247

    Operational features 41-001160-00, release 2.1, rev 04 5-37 configuring operational features operational ip phone features configuring park /pickup using static configuration (55i, 57i, 57i ct only) use the following procedures to configure the park/pickup call feature using the static configuration...

  • Page 248

    Operational features 5-38 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->preferences->general. 2 enter a server value in the park call field to which incoming live calls will be parked. Note: for values to enter i...

  • Page 249: Suppressing Dtmf Playback

    Operational features 41-001160-00, release 2.1, rev 04 5-39 configuring operational features operational ip phone features suppressing dtmf playback a feature on the ip phones allows users and administrators to enable or disable the suppression of dtmf playback when a number is dialed from the softk...

  • Page 250

    Operational features 5-40 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->preferences->general. 2 enable the "suppress dtmf playback" field by checking the check box. (disable this field by unchecking the box). Def...

  • Page 251: Display Dtmf Digits

    Operational features 41-001160-00, release 2.1, rev 04 5-41 configuring operational features operational ip phone features display dtmf digits a feature on the ip phones allows users and administrators to enable or disable dtmf (dual-tone multi-frequency) digits to display to the ip phone when using...

  • Page 252

    Operational features 5-42 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->preferences->general. 2 enable the "display dtmf digits" field by checking the check box. (disable this field by unchecking the box). Defaul...

  • Page 253

    Operational features 41-001160-00, release 2.1, rev 04 5-43 configuring operational features operational ip phone features call waiting/call waiting tone a call waiting feature notifies the user currently on the phone, of a new incoming call. You can disable this call waiting feature, so that the ne...

  • Page 254

    Operational features 5-44 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features call waiting tone you can also enable or disable the playing of a short “call waiting tone" when there is an incoming call on your phone. This feature is enabled by default. If you ...

  • Page 255

    Operational features 41-001160-00, release 2.1, rev 04 5-45 configuring operational features operational ip phone features . Aastra web ui 1 click on basic settings-> preferences->general. 2 the "call waiting" field is enabled by default. To disable this field, uncheck the box. This feature allows y...

  • Page 256: Stuttered Dial Tone

    Operational features 5-46 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features stuttered dial tone you can enable or disable the playing of a stuttered dial tone when there is a message waiting on the ip phone. You can configure this feature using the configur...

  • Page 257

    Operational features 41-001160-00, release 2.1, rev 04 5-47 configuring operational features operational ip phone features aastra web ui 1 click on basic settings->preferences->general. 2 the "stuttered dial tone" field is enabled by default. To disable this field, uncheck the box. 3 click to save y...

  • Page 258: Xml Beep Support

    Operational features 5-48 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features xml beep support the ip phones have a feature that allows you to enable or disable a beep on the phone with it receives a status message from an xml application. This beep can be tu...

  • Page 259

    Operational features 41-001160-00, release 2.1, rev 04 5-49 configuring operational features operational ip phone features aastra web ui 1 click on basic settings->preferences->general. 2 the “xml beep support” field is enabled by default. To disable this field, uncheck the box. 3 click to save your...

  • Page 260: Status Scroll Delay

    Operational features 5-50 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features status scroll delay the ip phones have a feature that allows you to specify the time delay, in seconds, between the scrolling of each status message (including xml status messages) ...

  • Page 261

    Operational features 41-001160-00, release 2.1, rev 04 5-51 configuring operational features operational ip phone features aastra web ui 1 click on basic settings->preferences->general. 2 in the “status scroll delay (seconds)” field, enter a value, in seconds, that each xml status message displays o...

  • Page 262

    Operational features 5-52 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features incoming call interrupts dialing you can configure whether or not an incoming call interrupts an outgoing call that is dialing. The incoming call interrupts dialing parameter contro...

  • Page 263

    Operational features 41-001160-00, release 2.1, rev 04 5-53 configuring operational features operational ip phone features aastra web ui 1 click on basic settings->preferences->general. 2 incoming call interrupts dialing is disabled by default. If required, enable the "incoming call interrupts diali...

  • Page 264

    Operational features 5-54 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features goodbye key cancels incoming call you can configure the goodbye key to drop active calls or ignore incoming calls using the “goodbye cancels incoming call” parameter. This parameter...

  • Page 265

    Operational features 41-001160-00, release 2.1, rev 04 5-55 configuring operational features operational ip phone features aastra web ui 1 click on basic settings->preferences->general. 2 incoming call interrupts dialing is disabled by default. If required, enable the "incoming call interrupts diali...

  • Page 266

    Operational features 5-56 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features upnp mapping lines (for remote phones) universal plug and play (upnp) is a standard that uses internet protocols to enable devices to be plugged into a network and automatically kno...

  • Page 267

    Operational features 41-001160-00, release 2.1, rev 04 5-57 configuring operational features operational ip phone features aastra web ui 1 click on basic settings->preferences->general. 2 the "upnp mapping lines" field is set to 0 by default. If required, change the setting to a specific line by sel...

  • Page 268

    Operational features 5-58 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features message waiting indicator line a user or administrator can configure the message waiting indicator (mwi) to illuminate for a specific line or for all lines. For example, if you conf...

  • Page 269

    Operational features 41-001160-00, release 2.1, rev 04 5-59 configuring operational features operational ip phone features aastra web ui 1 click on basic settings-> preferences->general. 2 in the “message waiting indicator line” field, select a single line from 1 to 9, or select “all” for all lines....

  • Page 270

    Operational features 5-60 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features incoming/outgoing intercom with auto-answer and barge in the intercom feature allows you to press the configured intercom button on the ip phone and then enter the number you want t...

  • Page 271

    Operational features 41-001160-00, release 2.1, rev 04 5-61 configuring operational features operational ip phone features incoming intercom calls you can configure how the phone handles incoming intercom calls. You can receive incoming intercom calls whether or not there are active calls on the pho...

  • Page 272

    Operational features 5-62 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features allow barge in you can configure whether or not the ip phone allows an incoming intercom call to interrupt an active call. The “sip intercom allow barge in” parameter controls this ...

  • Page 273

    Operational features 41-001160-00, release 2.1, rev 04 5-63 configuring operational features operational ip phone features use the following procedures to configure intercom calls on the ip phone. Configuration files for specific parameters you can set in the configuration files for outgoing interco...

  • Page 274

    Operational features 5-64 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features 4 if phone-side or server-side is selected, select a line from the line list box for which you want the ip phone to use as its configuration on the intercom call. Note: the ip phone...

  • Page 275

    Operational features 41-001160-00, release 2.1, rev 04 5-65 configuring operational features operational ip phone features 3 the "microphone mute" field is enabled by default. The microphone is muted on the ip phone for intercom calls made by the originating caller. To disable this field, uncheck th...

  • Page 276: Key Mapping

    Operational features 5-66 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features key mapping there are hard keys on your phone, such as hold, redial, xfer, and conf that are configured by default for specific call-handling features. (see the product-specific use...

  • Page 277

    Operational features 41-001160-00, release 2.1, rev 04 5-67 configuring operational features operational ip phone features use the following procedure to enable/disable the redial, xfer, and conf keys. Mapping redial and conf keys as speeddials you can map the redial and conference keys on the ip ph...

  • Page 278

    Operational features 5-68 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->preferences. 2 in the key mapping section, enter a number in the "map redial key to" field, that the ip phone will use to speeddial when the...

  • Page 279

    Operational features 41-001160-00, release 2.1, rev 04 5-69 configuring operational features operational ip phone features using redial key for “last number redial” the ip phones have an enhanced redial user interface that allows a user to quickly redial the last number that was dialed out from the ...

  • Page 280: Ring Tones and Tone Sets

    Operational features 5-70 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features ring tones and tone sets you can configure ring tones and ring tone sets on the ip phones. Ring tones there are several distinct ring tones a user or administrator can select from t...

  • Page 281

    Operational features 41-001160-00, release 2.1, rev 04 5-71 configuring operational features operational ip phone features configuration method valid values default value aastra web ui global: tone 1 tone 2 tone 3 tone 4 tone 5 silent per-line: global tone 1 tone 2 tone 3 tone 4 tone 5 silent global...

  • Page 282

    Operational features 5-72 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features ring tone sets in addition to ring tones, you can configure ring tone sets on a global-basis on the ip phones. Ring tone sets consist of tones customized for a specific country. The...

  • Page 283

    Operational features 41-001160-00, release 2.1, rev 04 5-73 configuring operational features operational ip phone features configuring ring tones and tone sets use the following procedures to configure ring tones and tone sets on the ip phones. Configuration files for specific parameters you can set...

  • Page 284

    Operational features 5-74 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->preferences. For global configuration: 2 in the "ring tones" section, select a country from the "tone set" field. Valid values are australia...

  • Page 285: Priority Alerting

    Operational features 41-001160-00, release 2.1, rev 04 5-75 configuring operational features operational ip phone features priority alerting priority alerting on the ip phones is a feature that allows incoming calls to trigger pre-defined ringing or call waiting alert tones. You can enable or disabl...

  • Page 286

    Operational features 5-76 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features sylantro servers the ring tone keywords that can display in the "alert-info" header for a sylantro server are: when the ring tone keywords appear in an "alert-info" header from a sy...

  • Page 287

    Operational features 41-001160-00, release 2.1, rev 04 5-77 configuring operational features operational ip phone features if you enable priority alerting when using a sylantro server, you can specify the bellcore tone to be used for the following configurable criteria: ring tone pattern (sylantro s...

  • Page 288

    Operational features 5-78 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features call waiting tones call waiting is a feature that tells you if a new caller is trying to contact you when you are already on the phone. A discreet tone alerts you to the new caller,...

  • Page 289

    Operational features 41-001160-00, release 2.1, rev 04 5-79 configuring operational features operational ip phone features configuring priority alerting use the following procedures to configure priority alerting on the ip phones. Configuration files for specific parameters you can set in the config...

  • Page 290

    Operational features 5-80 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features for sylantro servers: 3 select a ring tone pattern for each of the following fields: • group • internal • external • emergency • priority • auto call distribution • community-1 • co...

  • Page 291

    Operational features 41-001160-00, release 2.1, rev 04 5-81 configuring operational features operational ip phone features directed call pickup (blf or xml call interception) directed call pickup is a feature on the phones that allows a user to intercept a call on a ringing phone which is part of th...

  • Page 292

    Operational features 5-82 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features blf and xml softkeys/programmable keys monitor the states of an extension. The extension states can be one of three states: "busy", "ringing" and "idle". If the monitored extension ...

  • Page 293

    Operational features 41-001160-00, release 2.1, rev 04 5-83 configuring operational features operational ip phone features you can enable/disable “directed call pickup” using the configuration files or the aastra web ui. Notes: 1. The default method for the phone to use is directed call pickup over ...

  • Page 294

    Operational features 5-84 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features enabling/disabling directed call pickup use the following procedure to enable or disable the directed call pickup feature on the ip phone. Configuration files to enable/disable dire...

  • Page 295

    Operational features 41-001160-00, release 2.1, rev 04 5-85 configuring operational features operational ip phone features configuring blf/blf list for directed call pickup use the following procedure to configure blf/blf list for directed call pickup in the configuration files. 4 enable the "play a...

  • Page 296

    Operational features 5-86 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features use the following procedure to configure blf or blf/list for directed call pickup in the aastra web ui. Aastra web ui 1 click on basic settings->preferences->directed call pickup se...

  • Page 297

    Operational features 41-001160-00, release 2.1, rev 04 5-87 configuring operational features operational ip phone features 5 click on operation->softkeys and xml or click on operation->programmable keys or click on operation->expansion module . Note: depending on your phone-model, the key configurat...

  • Page 298

    Operational features 5-88 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features 9 in the "value" field, enter a value to associate with the softkey or programmable key. For example, for blf, the value is the extension you want to monitor. For blf\list, the valu...

  • Page 299

    Operational features 41-001160-00, release 2.1, rev 04 5-89 configuring operational features operational ip phone features configuring xml for directed call pickup use the following procedure to configure xml for directed call pickup in the configuration files. Notes: 1. Before implementing this pro...

  • Page 300

    Operational features 5-90 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features use the following procedure to configure xml for directed call pickup in the aastra web ui. Aastra web ui 1 click on basic settings->preferences->directed call pickup settings. 2 en...

  • Page 301

    Operational features 41-001160-00, release 2.1, rev 04 5-91 configuring operational features operational ip phone features 5 click on operation->softkeys and xml or click on operation->programmable keys or click on operation->expansion module . Note: depending on your phone-model, the key configurat...

  • Page 302

    Operational features 5-92 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features 9 in the "value" field, enter the uri that the phone uses to display the xml application to the lcd. For example, http://65.205.71.13/xml/startup/key.Php?User=$$sipremotenumber$$. N...

  • Page 303

    Operational features 41-001160-00, release 2.1, rev 04 5-93 configuring operational features operational ip phone features softkeys/programmable keys/feature keys/expansion module keys you can configure the softkeys, programmable keys (53i has programmable keys only), feature keys, and expansion mod...

  • Page 304

    Operational features 5-94 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features state-based softkeys (55i, 57i, 57i ct only) users and administrators can configure a specific state to display when a softkey is being used. Available states you can configure for ...

  • Page 305

    Operational features 41-001160-00, release 2.1, rev 04 5-95 configuring operational features operational ip phone features you can enable or disable the softkey states using the configuration files or the aastra web ui. In the aastra web ui, you disable a state by unchecking the box for that operati...

  • Page 306

    Operational features 5-96 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features configuration example the following example illustrates the use of the "softkeyn states" parameter, and the "softkeyn type" parameter with a value of empty. For clarity purposes, on...

  • Page 307

    Operational features 41-001160-00, release 2.1, rev 04 5-97 configuring operational features operational ip phone features programmable keys (53i, 55i) the following table provides the number of softkeys and programmable keys you can configure, and the number of lines available for each type of phon...

  • Page 308

    Operational features 5-98 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features key functions table softkey/ programmable key function configuration file parameter aastra web ui parameter description none none none indicates not setting for the key. Line line l...

  • Page 309

    Operational features 41-001160-00, release 2.1, rev 04 5-99 configuring operational features operational ip phone features auto call distribution (acd) acd auto call distribution (for sylantro servers) indicates the key is configured for automatic call distribution (acd). Acd allows the sylantro ser...

  • Page 310

    Operational features 5-100 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features flash (not applicable on expansion modules) flash flash indicates the key is set to generate a flash event when it is pressed, or when a feature key is pressed on the 57i ct handse...

  • Page 311

    Operational features 41-001160-00, release 2.1, rev 04 5-101 configuring operational features operational ip phone features callers list callers list callers list indicates the key is set for accessing the callers list. For more information on the callers list, see the section “callers list” on page...

  • Page 312

    Operational features 5-102 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features reference for more information about key functions for your model phone, see your model-specific user’s guide. Services (not applicable to the 53i) services services indicates the ...

  • Page 313

    Operational features 41-001160-00, release 2.1, rev 04 5-103 configuring operational features operational ip phone features configuring softkeys and programmable keys use the following procedures to configure the softkeys and programmable keys on the ip phone. Configuration files for specific parame...

  • Page 314

    Operational features 5-104 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on operation->softkeys and xml or click on operation->programmable keys or click on operation->expansion module . Depending on your phone-model, the key confi...

  • Page 315

    Operational features 41-001160-00, release 2.1, rev 04 5-105 configuring operational features operational ip phone features 5 if applicable, in the "value" field, enter a value to associate with the softkey. For example, for a speeddial value, you can enter a number you want to use for the speeddial...

  • Page 316

    Operational features 5-106 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features 57i cordless (ct) feature keys in addition to the softkeys on the 57i ct, this phone also has handset keys you can configure with specific features. You can use the aastra web ui t...

  • Page 317

    Operational features 41-001160-00, release 2.1, rev 04 5-107 configuring operational features operational ip phone features feature key programming guidelines the following are guidelines to use when programming the feature keys on the handset: • all handsets paired with the same base station have t...

  • Page 318

    Operational features 5-108 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features handset feature key functions you can configure the features keys on the 57i ct handset to perform specific functions using the configuration files or the aastra web ui.The followi...

  • Page 319

    Operational features 41-001160-00, release 2.1, rev 04 5-109 configuring operational features operational ip phone features transfer xfer xfer indicates the key is configured as a transfer key for transferring calls. For more information about the xfer key, see your aastra ip phone 57i ct user’s gui...

  • Page 320

    Operational features 5-110 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features reference for more information about features key functions for your 57i ct, see your aastra ip phone 57i ct user’s guide. Public public public indicates the key is configured to t...

  • Page 321

    Operational features 41-001160-00, release 2.1, rev 04 5-111 configuring operational features operational ip phone features configuring handset feature keys you can program up to 15 feature keys on the 57i ct ip phone using the configuration files or the aastra web ui. Use the following procedure to...

  • Page 322

    Operational features 5-112 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on operation->handset keys. 2 select the handset key you want to program. 3 select the function for that handset key from the "key function" field. 4 click to...

  • Page 323: Speeddial Prefixes

    Operational features 41-001160-00, release 2.1, rev 04 5-113 configuring operational features operational ip phone features speeddial prefixes the normal function of the speeddial option allows you to configure a specific key on the phone to dial a number quickly by pressing the configured key. For ...

  • Page 324: Busy Lamp Field (Blf)

    Operational features 5-114 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features busy lamp field (blf) the blf feature on the ip phones allows a specific extension to be monitored for state changes. Blf monitors the status (busy or idle) of extensions on the ip...

  • Page 325

    Operational features 41-001160-00, release 2.1, rev 04 5-115 configuring operational features operational ip phone features blf\list setting (for use with the broadsoft broadworks rel 13 or higher platform only) the blf\list feature on the ip phones is specifically designed to support the broadsoft ...

  • Page 326

    Operational features 5-116 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features asterisk blf configuration you can enable the blf feature on asterisk to enable monitoring for specific extensions. Blf on asterisk is possible through the “hint” extension paramet...

  • Page 327

    Operational features 41-001160-00, release 2.1, rev 04 5-117 configuring operational features operational ip phone features configuring blfs use the following procedures to configure blf and blf\list on the ip phone. Configuration files to set blf or blf\list in the configuration files, see appendix...

  • Page 328

    Operational features 5-118 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on operation->softkeys and xml or click on operation->programmable keys or click on operation->expansion module . Depending on your phone-model, the key confi...

  • Page 329

    Operational features 41-001160-00, release 2.1, rev 04 5-119 configuring operational features operational ip phone features 4 for the 55i, 57i, and 57i ct softkeys: in the "label" field, enter the name of the person who’s extension you are monitoring (if “type” is blf). Note: if blf\list type is sel...

  • Page 330: Blf Subscription Period

    Operational features 5-120 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features blf subscription period on the ip phones, you can set the time period, in seconds, that the ip phone resubscribes the blf subscription service after a software/firmware upgrade or ...

  • Page 331

    Operational features 41-001160-00, release 2.1, rev 04 5-121 configuring operational features operational ip phone features aastra web ui 1 click on advanced settings->global sip->advanced sip settings. 2 enter a value, in seconds, from 120 (2 min) to 3600 (1 hour) in the "blf subscription period" f...

  • Page 332

    Operational features 5-122 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features automatic call distribution (acd) (for sylantro servers) the ip phones support an automatic call distribution (acd) feature for sylantro servers. The acd feature allows the sylantr...

  • Page 333

    Operational features 41-001160-00, release 2.1, rev 04 5-123 configuring operational features operational ip phone features acd auto-available timer whenever the ip phone user answers a call, or misses a call, the server automatically changes the phone’s status to unavailable. The administrator can ...

  • Page 334

    Operational features 5-124 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features configuring the acd auto-available timer. Configuration files to configure the acd auto-available timer using the configuration files, see appendix a, the section, “acd auto-availa...

  • Page 335

    Operational features 41-001160-00, release 2.1, rev 04 5-125 configuring operational features operational ip phone features configuring an acd key using the aastra web ui use the following procedure to configure an acd softkey, programmable key, or expansion module key using the aastra web ui. This ...

  • Page 336

    Operational features 5-126 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features configuring the acd auto-available timer using the aastra web ui use the following procedure to configure an acd auto-available timer using the aastra web ui. 4 in the “line” field...

  • Page 337

    Operational features 41-001160-00, release 2.1, rev 04 5-127 configuring operational features operational ip phone features 3 in the “auto available timer” field, specify the length of time (in seconds) before the ip phone state is automatically reset to “available.” valid values are 0 to 120 second...

  • Page 338

    Operational features 5-128 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features using the acd feature on your ip phone the acd feature allows you to login to a phone queue in order to receive distributed calls on your ip phone. To login to a phone queue, your ...

  • Page 339

    Operational features 41-001160-00, release 2.1, rev 04 5-129 configuring operational features operational ip phone features this icon changes when you log on to the phone queue and are available to take calls. The icon changes again when you are busy with an active call. The table below describes th...

  • Page 340

    Operational features 5-130 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features logging in to a phone queue (55i, 57i, 57i ct) use the following procedure to log into a phone queue from your aastra ip phone. Aastra ip phone ui step action 1 press the acd softk...

  • Page 341

    Operational features 41-001160-00, release 2.1, rev 04 5-131 configuring operational features operational ip phone features 3 press the log in softkey. You are logged into the phone queue. Once you log in, examine the ip phone ui, and note the following information: • if your ip phone status is set ...

  • Page 342

    Operational features 5-132 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features logging in to a phone queue (53i) use the following procedure to log into a phone queue from your aastra ip phone. Aastra ip phone ui step action 1 press the acd programmable key o...

  • Page 343: Acd Subscription Period

    Operational features 41-001160-00, release 2.1, rev 04 5-133 configuring operational features operational ip phone features acd subscription period on the ip phones, you can set the time period, in seconds, that the ip phone resubscribes the acd subscription service after a software/firmware upgrade...

  • Page 344

    Operational features 5-134 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on advanced settings->global sip->advanced sip settings. 2 enter a value, in seconds, from 120 (2 min) to 3600 (1 hour) in the "acd subscription period" field...

  • Page 345

    Operational features 41-001160-00, release 2.1, rev 04 5-135 configuring operational features operational ip phone features directed call pickup/group call pickup (for sylantro servers) aastra ip phones and any attached expansion modules support the directed call pickup (dcp) and group call pickup (...

  • Page 346

    Operational features 5-136 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features configuring dcp/gcp using the configuration files (for sylantro servers) use the following procedures to configure dcp/gcp using the configuration files. Configuration files to set...

  • Page 347

    Operational features 41-001160-00, release 2.1, rev 04 5-137 configuring operational features operational ip phone features configuring directed call pickup (dcp) using the aastra web ui (for sylantro servers) use the following procedure to configure directed call pickup using the aastra web ui. Thi...

  • Page 348

    Operational features 5-138 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features 5 in the “value” field, specify the extension you want to intercept when you press this softkey. For example: 2200 6 click to save your changes. Aastra web ui.

  • Page 349

    Operational features 41-001160-00, release 2.1, rev 04 5-139 configuring operational features operational ip phone features configuring group call pickup (gcp) using the aastra web ui (for sylantro servers) use the following procedure to configure group call pickup using the aastra web ui. Note: a r...

  • Page 350

    Operational features 5-140 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features using directed call pickup/group call pickup use the following procedure for the dcp/gcp on your phone. 4 in the “label” field, specify a name for this directed call pickup softkey...

  • Page 351

    Operational features 41-001160-00, release 2.1, rev 04 5-141 configuring operational features operational ip phone features 2 if the monitored extension receives multiple incoming calls simultaneously, the phone displays a list of incoming calls. 3 select a call from this list using the up and down ...

  • Page 352: Do Not Disturb (Dnd)

    Operational features 5-142 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features do not disturb (dnd) the ip phones have a feature you can enable called "do not disturb (dnd). You can configure dnd on softkeys and programmable keys using the aastra web ui or th...

  • Page 353

    Operational features 41-001160-00, release 2.1, rev 04 5-143 configuring operational features operational ip phone features aastra web ui 1 click on operation->softkeys and xml or click on operation->programmable keys or click on operation->expansion module . Depending on your phone-model, the key c...

  • Page 354

    Operational features 5-144 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features bridged line appearance (bla) (55i, 57i, 57i ct only) a sip bridge line appearance (bla) on the ip phones allows multiple devices to share a single directory address (da). For exam...

  • Page 355

    Operational features 41-001160-00, release 2.1, rev 04 5-145 configuring operational features operational ip phone features the following table shows the number of lines that can be set to bla for each model phone. Configuring bla you can configure bla on a global or per-line basis using the configu...

  • Page 356

    Operational features 5-146 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features per-line bla you configure bla on a per-line basis in the configuration files using the following parameters: sip linen mode sip linen username sip linen bla number you configure b...

  • Page 357

    Operational features 41-001160-00, release 2.1, rev 04 5-147 configuring operational features operational ip phone features for inin server when configuring the bla feature on an inin server, the value set for the sip linen bla number parameter shall be the same value set for the sip linen user name...

  • Page 358

    Operational features 5-148 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 for global configuration of bla: click on advanced settings->global sip->basic sip authentication settings..

  • Page 359

    Operational features 41-001160-00, release 2.1, rev 04 5-149 configuring operational features operational ip phone features for per-line configuration of bla: click on advanced settings->line n (1-9). In the "line mode" field, select the bla option. 2 in the "phone number" field, enter the phone num...

  • Page 360

    Operational features 5-150 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features using a bla line on the ip phone if you have either a global or per-line bla configuration, and you want to share a call on the line with a bla group, you need to press the hold bu...

  • Page 361

    Operational features 41-001160-00, release 2.1, rev 04 5-151 configuring operational features operational ip phone features bla support for third party registration bla allows an address of record (aor) to be assigned onto different line appearances for a group of sip user agents (ip phones). When a...

  • Page 362

    Operational features 5-152 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features #alice phone number sip line2 bla number:4085582868 sip line2 display name:alice sip line2 screen name:alice alice’s configuration is as follows: #line 1 sip line1 auth name:408558...

  • Page 363: Park/pick Up Key

    Operational features 41-001160-00, release 2.1, rev 04 5-153 configuring operational features operational ip phone features park/pick up key the ip phones (including the 57i ct handset) have a park and pickup call feature that allows you to park a call and pickup a call when required. There are two ...

  • Page 364

    Operational features 5-154 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features on 57i/57i ct on the ip phone ui, the park/pickup feature displays the following: • when a call comes in, and you pickup the handset, the custom label that you configured for the p...

  • Page 365

    Operational features 41-001160-00, release 2.1, rev 04 5-155 configuring operational features operational ip phone features configuring park/pickup key using configuration files in the configuration files, you configure park/pickup using the key parameters. You must specify the "softkeyn value", "pr...

  • Page 366

    Operational features 5-156 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features model 53i examples use the following procedure to configure a park/pickup key using the configuration files. Server park configuration pickup configuration asterisk prgkeyn type: p...

  • Page 367

    Operational features 41-001160-00, release 2.1, rev 04 5-157 configuring operational features operational ip phone features configuring a park/pickup key using aastra web ui on the 57i/57i ct, you configure a park and/or pickup key at operation->softkeys and xml. You enter a key label, and value for...

  • Page 368

    Operational features 5-158 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui for the 57i/57i ct: 1 click on operation->softkeys and xml. 2 pick a softkey to configure for parking a call. 3 in the "type" field, select park. 4 in the "label" fie...

  • Page 369

    Operational features 41-001160-00, release 2.1, rev 04 5-159 configuring operational features operational ip phone features 11 in the "value" field, enter the appropriate value based on the server in your network. Note: for values to enter in this field, see the table “park/pickup call server config...

  • Page 370

    Operational features 5-160 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features for the 53i: 1 click on operation->programmable keys. 53i screen 2 pick a hard key (from keys 3 through 6) to configure for parking a call. 3 in the "hard key" field, select park. ...

  • Page 371

    Operational features 41-001160-00, release 2.1, rev 04 5-161 configuring operational features operational ip phone features 10 click to save your changes. You must restart your ip phone for the changes to take affect. 11 click on operation->reset. 12 in the "restart phone" field click to restart the...

  • Page 372

    Operational features 5-162 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features using the park call/pickup parked call feature use the following procedures on the ip phones to park a call and pick up a parked call. Ip phone ui step action parking a call 1 whil...

  • Page 373

    Operational features 41-001160-00, release 2.1, rev 04 5-163 configuring operational features operational ip phone features 5 enter the extension number where the call was parked. 6 press the "pickup" softkey. If the call pick up is successful, you are connected with the parked call. Ip phone ui ste...

  • Page 374

    Operational features 5-164 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features last call return (lcr) (for sylantro servers last call return (lcr) allows an administrator or user to configure a "last call return" function on a softkey or programmable key. Thi...

  • Page 375

    Operational features 41-001160-00, release 2.1, rev 04 5-165 configuring operational features operational ip phone features aastra web ui for the 57i/57i ct: 1 click on operation->softkeys and xml. 2 pick a softkey to configure for last call return. 3 in the "type" field, select lcr. 4 in the "line"...

  • Page 376

    Operational features 5-166 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features for the 57i ct handset: 1 click on operation->handset keys. 2 pick a handset key to configure for last call return. 3 in the "key function" field, select lcr. 4 click to save your ...

  • Page 377

    Operational features 41-001160-00, release 2.1, rev 04 5-167 configuring operational features operational ip phone features for the 53i 1 click on operation->programmable keys. 53i screen 2 pick a hard key (from keys 3 through 6) to configure for last call return. 3 in the "type" field, select lcr. ...

  • Page 378: Call Forwarding

    Operational features 5-168 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features call forwarding the call forwarding feature on the ip phone allows incoming calls to be forwarded to another destination. The phone sends the sip message to the sip proxy, which th...

  • Page 379

    Operational features 41-001160-00, release 2.1, rev 04 5-169 configuring operational features operational ip phone features the following table shows the ip phone model and the number of lines for which you can configure call forwarding. Enabling/disabling the ability to configure call forwarding us...

  • Page 380

    Operational features 5-170 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features configuration method for call forwarding the method you use to configure call forwarding depends on the model phone you are configuring. You can set the phone-wide call forward set...

  • Page 381

    Operational features 41-001160-00, release 2.1, rev 04 5-171 configuring operational features operational ip phone features 4 for 53i: in the “cfwd mode” field, enter the mode that you want to set on your phones. For 55i/57i/57i ct: in the “mode” field, enter the mode that you want to set on your ph...

  • Page 382

    Operational features 5-172 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on basic settings->call forward. For global configuration of call forwarding: 2 in the "mode" field, select the mode you want to set on your phone. Valid mode...

  • Page 383

    Operational features 41-001160-00, release 2.1, rev 04 5-173 configuring operational features operational ip phone features 4 in the "number of rings" field, enter the number of rings you want your phone to ring before the call is forwarded. Valid values are 1 to 9. Note: "number of rings" field app...

  • Page 384: Callers List

    Operational features 5-174 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features callers list the ip phones have a "callers list" feature that store the name, phone number, and incremental calls, for each call received by the phone. The following illustrating s...

  • Page 385

    Operational features 41-001160-00, release 2.1, rev 04 5-175 configuring operational features operational ip phone features when you download the callers list, the phone stores the callerlist.Csv file to your computer in comma-separated value (csv) format. You can use any spreadsheet application to ...

  • Page 386

    Operational features 5-176 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features enabling/disabling callers list you can enable and disable user access to the callers list on the ip phones using the following parameter in the configuration files: • callers list...

  • Page 387

    Operational features 41-001160-00, release 2.1, rev 04 5-177 configuring operational features operational ip phone features 5 to save a line item to a programmable key for speeddialing, press the 3 save key and enter the line number at the "save to?" prompt that is already configured for speeddialin...

  • Page 388

    Operational features 5-178 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features downloading the callers list use the following procedure to download the callers list using the aastra web ui. Aastra web ui 1 click on operation->directory. 2 in the callers list ...

  • Page 389

    Operational features 41-001160-00, release 2.1, rev 04 5-179 configuring operational features operational ip phone features customizable callers list and services keys the ip phones currently have a callers list key (all 5i series phones) and a services key (55i, 57i, and 57i ct). An administrator c...

  • Page 390: Missed Calls Indicator

    Operational features 5-180 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features missed calls indicator the ip phone has a "missed calls" indicator that increments the number of missed calls to the phone. This feature is accessible from the ip phone ui only. Yo...

  • Page 391

    Operational features 41-001160-00, release 2.1, rev 04 5-181 configuring operational features operational ip phone features accessing and clearing missed calls use the following procedure to access and clear missed calls from the callers list. Once you display the callers list, the " new calls" indi...

  • Page 392: Directory List

    Operational features 5-182 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features directory list the ip phones have a "directory list" feature that allows you to store frequently used names and numbers on the phone. You can also dial directly from the directory ...

  • Page 393

    Operational features 41-001160-00, release 2.1, rev 04 5-183 configuring operational features operational ip phone features you can also sort multiple numbers according to preference and perform a quick-search feature that allows you to enter the first letter that corresponds to a name in the direct...

  • Page 394

    Operational features 5-184 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features • you can use any spreadsheet application to open the file for viewing. The following is an example of a directory list in a spreadsheet application. This is an administrator and u...

  • Page 395

    Operational features 41-001160-00, release 2.1, rev 04 5-185 configuring operational features operational ip phone features enabling/disabling directory list you can enable and disable user access to the directory list on the ip phones using the following parameter in the configuration files: • dire...

  • Page 396

    Operational features 5-186 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features server to ip phone download you can populate your ip phone directory list with server directory files. To activate this feature, you need to add the following parameters to the con...

  • Page 397

    Operational features 41-001160-00, release 2.1, rev 04 5-187 configuring operational features operational ip phone features server to ip phone download behavior the software that reads directory files from the server, loads the file’s contents into the phone's nvram when the phone is booting. Direct...

  • Page 398

    Operational features 5-188 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features using the directory list use the following procedures to access and use the directory list. Note: in the following procedure, the location of keys (hard keys, softkeys, and program...

  • Page 399

    Operational features 41-001160-00, release 2.1, rev 04 5-189 configuring operational features operational ip phone features to edit an entry in the directory list: 5 a at a line item in the directory list, press the 3 key. Note: use the save key to scroll between the number, name and line entries. B...

  • Page 400

    Operational features 5-190 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features 9 to exit the directory list, press the directory key again, the goodbye key, or the quit key (depending on your specific phone model). From the 57i ct handset: 10 a press the publ...

  • Page 401

    Operational features 41-001160-00, release 2.1, rev 04 5-191 configuring operational features operational ip phone features downloading from the server to the ip phone you can use the configuration files to download the directory list from the configuration server to the ip phone.. Use the following...

  • Page 402

    Operational features 5-192 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features use the following procedure to configure the download. Aastra web ui 1 click on operation->directory. 2 in the directory list field, click on . A “file download” message displays. ...

  • Page 403

    Operational features 41-001160-00, release 2.1, rev 04 5-193 configuring operational features operational ip phone features voicemail (55i, 57i, and 57i ct only) the voicemail feature on the 55i, 57i and 57i ct ip phones allow you to configure lines with phone numbers so the phone can dial out to co...

  • Page 404

    Operational features 5-194 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features you can enter up to 9 voicemail numbers associated with each of the 9 lines on the phone. For example: sip line1 vmail: *97 sip line2 vmail: *95 use the following procedure to conf...

  • Page 405

    Operational features 41-001160-00, release 2.1, rev 04 5-195 configuring operational features operational ip phone features using voicemail (57i57i ct only) use the following procedure to access and use voicemail. Ip phone ui step action for the 57i/57i ct: 1 press services on the phone to display t...

  • Page 406: Xml Customized Services

    Operational features 5-196 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features xml customized services extensible markup language (xml) is a markup language much like html. Html was designed to display data and to focus on how data looks. Xml was designed to ...

  • Page 407

    Operational features 41-001160-00, release 2.1, rev 04 5-197 configuring operational features operational ip phone features for more information about creating customized xml applications, see appendix g, “creating an xml application.” aastraipphonedirectory (for directory list screen) creates an on...

  • Page 408

    Operational features 5-198 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features you can also use the following attributes/options with the xml objects to further customize your xml applications: attribute/option description/usage valid values beep enables or d...

  • Page 409

    Operational features 41-001160-00, release 2.1, rev 04 5-199 configuring operational features operational ip phone features lockin specifies whether or not the information on the lcd screen stays displayed when other events occur (such as pressing buttons on the keypad). Use with: xml object (see ap...

  • Page 410

    Operational features 5-200 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features enabling/disabling a beep for status message displays you can enable or disable a beep option using the status message object (aastraipphonestatus), the configuration files, or the...

  • Page 411

    Operational features 41-001160-00, release 2.1, rev 04 5-201 configuring operational features operational ip phone features scroll delay option for status messages the ip phones support a scroll delay option that allows you to set the time delay, in seconds, between the scrolling of each status mess...

  • Page 412

    Operational features 5-202 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features for more information about creating xml configuration scripts and for xml script examples, see appendix g, “creating an xml application” . Configuring the phone to use xml you can ...

  • Page 413

    Operational features 41-001160-00, release 2.1, rev 04 5-203 configuring operational features operational ip phone features xml push requests in addition to initiating a request to an xml application from a softkey, an http server can push an xml object to the phone via http post. When the phone see...

  • Page 414

    Operational features 5-204 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui for the 57i/57i ct: 1 click on operation->softkeys and xml. 2 select a key from keys 1 through 20. 3 in the "type" field, select xml from the list box. 4 in the "labe...

  • Page 415

    Operational features 41-001160-00, release 2.1, rev 04 5-205 configuring operational features operational ip phone features 8 click to save your changes. The xml application is applied to the ip phone immediately. When the xml application is pushed to the phone via an http post, a host ip address or...

  • Page 416

    Operational features 5-206 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui for the 53i 1 click on operation->programmable keys. 53i screen 2 for the 53i, select a key from keys 3 through 6. 3 in the "hard key" field, select xml from the list...

  • Page 417

    Operational features 41-001160-00, release 2.1, rev 04 5-207 configuring operational features operational ip phone features 6 click on advanced settings->configuration server. 7 in the "xml push server list (approved ip addresses)" field, enter the host ip address and/or domain name server. You can ...

  • Page 418

    Operational features 5-208 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features using the xml customized service after you create, save, and configure the ip phone with an xml application, the customized service is ready for you to use. Use the following proce...

  • Page 419

    Operational features 41-001160-00, release 2.1, rev 04 5-209 configuring operational features operational ip phone features xml action uris the ip phones have a feature that allows an administrator to specify a uniform resource identifier (uri) that triggers a get when certain events occur. The ip p...

  • Page 420

    Operational features 5-210 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features the following table identifies the configurable action uri parameters in the configuration files and the aastra web ui. This table also identifies the variables that apply to speci...

  • Page 421

    Operational features 41-001160-00, release 2.1, rev 04 5-211 configuring operational features operational ip phone features http://10.50.10.140/outgoing.Pl?Number=5551212 you can configure this feature via the configuration files or the aastra web ui. Configuring xml action uris use the following pr...

  • Page 422

    Operational features 5-212 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features aastra web ui 1 click on advanced settings->action uri. 2 enter an xml uri for a startup event in the “startup” field. For example: http://10.50.10.140/startup this parameter speci...

  • Page 423

    Operational features 41-001160-00, release 2.1, rev 04 5-213 configuring operational features operational ip phone features 4 enter an xml uri for an incoming call event in the “incoming call” field. For example: http://10.50.10.140/incoming.Php?Number=$$remotenumber$$ this parameter specifies the u...

  • Page 424

    Operational features 5-214 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features xml softkey uri in addition to specifying variables for the action uris, you can also specify variables in the xml softkey uris that are bound when the key is pressed. These variab...

  • Page 425

    Operational features 41-001160-00, release 2.1, rev 04 5-215 configuring operational features operational ip phone features configuring xml softkey uris use the following procedures to configure xml softkey uris using the configuration files or the aastra web ui. Configuration files for specific par...

  • Page 426

    Operational features 5-216 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features 3 in the "type" field, select xml from the list box. 4 in the "label" field, enter a label that displays on the ip phone for the xml softkey. For example, "aastra". 5 in the "value...

  • Page 427

    Operational features 41-001160-00, release 2.1, rev 04 5-217 configuring operational features operational ip phone features aastra web ui for the 53i: 1 click on operation->programmable keys. 53i screen 2 on the 53i, select a key from keys 1 through 6. 3 in the "type" field, select xml from the list...

  • Page 428

    Operational features 5-218 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features audio transmit and receive gain adjustments the audio gain properties for the ip phone handset, headset, and speakerphone is adjusted to reduce side-tone and echo on the local and ...

  • Page 429

    Operational features 41-001160-00, release 2.1, rev 04 5-219 configuring operational features operational ip phone features configuring audio transmit and receive gain adjustments you can configure the audio transmit and gain adjustments using the configuration files only. Use the following procedur...

  • Page 430

    Operational features 5-220 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features centralized conferencing (for sylantro and broadsoft servers) the ip phones include support for centralized conferencing (ad-hoc conferencing) for sylantro and broadsoft servers. T...

  • Page 431

    Operational features 41-001160-00, release 2.1, rev 04 5-221 configuring operational features operational ip phone features to use the centralized conferencing after it is enabled, see your model-specific ip phone user guide. Configuring centralized conferencing using the configuration files you use...

  • Page 432

    Operational features 5-222 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features configuring centralized conferencing using the aastra web ui use the following procedure to configure centralized conferencing using the aastra web ui. Aastra web ui global configu...

  • Page 433

    Operational features 41-001160-00, release 2.1, rev 04 5-223 configuring operational features operational ip phone features 3 click to save your changes. Per-line configuration 1 click on advanced settings->line ->basic sip network settings 2 in the “conference server uri” field, do one of the follo...

  • Page 434

    Operational features 5-224 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features customizing the display columns on the 560m expansion module the 560m expansion module screen displays softkeys in column format. The function keys on the bottom left of the module...

  • Page 435

    Operational features 41-001160-00, release 2.1, rev 04 5-225 configuring operational features operational ip phone features to use the 560m, press the function key for the page you want to display to the lcd (page 1, page2, or page 3), and press the applicable softkey. You can customize the headings...

  • Page 436

    Operational features 5-226 41-001160-00, release 2.1, rev 04 ip phone administrator guide operational ip phone features expansion module 3 (3 pages) • expmod3page1left • expmod3page1right • expmod3page2left • expmod3page2right • expmod3page3left • expmod3page3right example the following is an exampl...

  • Page 437

    Operational features 41-001160-00, release 2.1, rev 04 5-227 configuring operational features operational ip phone features these settings display to the expansion module as shown in the following illustrations. Cuztomizing the 560m expansion module column display. Configuration files for specific p...

  • Page 439: Chapter 6

    41-001160-00, release 2.1, rev 04 6-1 advanced operational features chapter 6 configuring advanced operational features about this chapter introduction the ip phones have advanced operational features you can configure using the configuration files and/or the aastra web ui. This chapter describes ea...

  • Page 440

    About this chapter 6-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features whitelist proxy page 6-19 transport layer security (tls) page 6-21 symmetric udp signaling page 6-27 removing useragent and server sip headers page 6-28 multi-stage digit collection (b...

  • Page 441: Description

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-3 configuring advanced operational features advanced operational features advanced operational features description this section provides the following information about advanced features of the ip phones: feature description mac addr...

  • Page 442

    Advanced operational features 6-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features transport layer security (tls) allows you to enable or disable the use of persistent transport layer security (tls). Persistent tls sets up the connection to the server once...

  • Page 443

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-5 configuring advanced operational features advanced operational features mac address/line number in register messages the ip phones can send the mac address and line number in the register packets making it easier for the call server...

  • Page 444

    Advanced operational features 6-6 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features . Aastra web ui step action 1 click on advanced settings->global sip->advanced sip setting. 2 enable the "send mac address in register message" field by checking the check b...

  • Page 445

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-7 configuring advanced operational features advanced operational features sip message sequence for blind transfer the sip message sequence for blind transfer avoids the transfer target having two simultaneous calls. Prior to release 1...

  • Page 446

    Advanced operational features 6-8 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features update caller id during a call it is possible for a proxy or call server to update the caller id information that displays on the phone during a call, by modifying the sip c...

  • Page 447: Boot Sequence Recovery Mode

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-9 configuring advanced operational features advanced operational features boot sequence recovery mode you can force the ip phone into recovery mode by pressing the 1 and # keys during boot up when the logo displays. This feature is en...

  • Page 448: Auto-Discovery Using Mdns

    Advanced operational features 6-10 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features auto-discovery using mdns the ip phones can perform an auto-discovery of all servers on a network using mdns. When the ip phone discovers a tftp server, it is automatically...

  • Page 449

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-11 configuring advanced operational features advanced operational features single call restriction (57i ct only) on the 57i ct, an administrator can enable or disable a single call restriction between the 57i ct base unit and a call s...

  • Page 450

    Advanced operational features 6-12 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features aastra web ui step action 1 click on advanced settings->global sip->rtp settings. 2 enable the "two call support" field by checking the check box. (disable this field by un...

  • Page 451

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-13 configuring advanced operational features advanced operational features missed call summary subscription the “missed call summary subscription” feature allows missed calls that have been redirected by the server, to be incremented ...

  • Page 452

    Advanced operational features 6-14 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features configuring missed call summary subscription using the configuration files in addition to enabling/disabling the misses call summary subscription, you can also configure th...

  • Page 453

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-15 configuring advanced operational features advanced operational features configuring missed call summary subscription using the aastra web ui use the following procedure to configure the missed call summary subscription feature usin...

  • Page 454

    Advanced operational features 6-16 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features 2 the "missed call summary subscription" field is disabled by default. To enable this field, check the box. This feature allows missed calls that have been redirected by th...

  • Page 455

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-17 configuring advanced operational features advanced operational features blacklist duration (broadsoft servers) the blacklist duration feature on broadsoft servers helps to reduce unnecessary delays during proxy/registrar server fai...

  • Page 456

    Advanced operational features 6-18 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features configuring a server blacklist using the aastra web ui you use the following procedure to configure blacklist duration using the aastra web ui. Aastra web ui 1 click on adv...

  • Page 457: Whitelist Proxy

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-19 configuring advanced operational features advanced operational features whitelist proxy to protect your ip phone network, you can configure a “whitelist proxy” feature that screens incoming call requests received by the ip phones. ...

  • Page 458

    Advanced operational features 6-20 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features configuring whitelist proxy using the aastra web ui use the following procedure to configure the whitelist proxy feature using the aastra web ui. Aastra web ui 1 click on a...

  • Page 459

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-21 configuring advanced operational features advanced operational features transport layer security (tls) the ip phones support a transport protocol called transport layer security (tls) and persistent tls. Tls is a protocol that ensu...

  • Page 460

    Advanced operational features 6-22 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features on the ip phones, an administrator can configure tls and persistent tls on a global-basis only, using the configuration files or the aastra web ui. Sip asserted identity (f...

  • Page 461

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-23 configuring advanced operational features advanced operational features configuring tls using the configuration files you use the following parameters to configure tls in the configuration files: • sip transport protocol • sips per...

  • Page 462

    Advanced operational features 6-24 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features configuring tls using the aastra web ui to configure tls using the aastra web ui, you must enable tls or persistent tls first. Then you must define the tls certificate file...

  • Page 463

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-25 configuring advanced operational features advanced operational features 4 click on advanced settings->tls support. Aastra web ui.

  • Page 464

    Advanced operational features 6-26 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features 5 enter the certificate file names and the private key file name in the appropriate fields. The root and intermediate certificate files contain one root certificate and zer...

  • Page 465: Symmetric Udp Signaling

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-27 configuring advanced operational features advanced operational features symmetric udp signaling by default, the ip phones use symmetric udp signaling for outgoing udp sip messages. When symmetric udp is enabled, the ip phone genera...

  • Page 466

    Advanced operational features 6-28 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features removing useragent and server sip headers currently, the phone always configures the sip useragent/server headers to contain: aastra / you can suppress the addition of thes...

  • Page 467: Servers)

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-29 configuring advanced operational features advanced operational features multi-stage digit collection (billing codes) support (for sylantro servers) the ip phones support multi-stage digit collection (billing codes) for sylantro ser...

  • Page 468

    Advanced operational features 6-30 41-001160-00, release 2.1, rev 04 ip phone administrator guide advanced operational features for example, suppose the ip phone user is using billing code 300, and dialing the external number 617-238-5500. The ip user then enters the number using the following forma...

  • Page 469

    Advanced operational features 41-001160-00, release 2.1, rev 04 6-31 configuring advanced operational features advanced operational features numbers not requiring billing codes billing codes are not required for the following two types of calls: • emergency calls (e911) • calls between extensions.

  • Page 471: Encryption and The Ip Phone

    41-001160-00, release 2.1, rev 04 7-1 encryption and the ip phone chapter 7 encrypted files on the ip phone about this chapter introduction this chapter provides information about encryption on the ip phones and provides methods an administrator can use to store encrypted files to a server. Topics t...

  • Page 472: Encryption and The Ip Phone

    Encrypted files on the ip phone 7-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide encryption and the ip phone encrypted files on the ip phone an encryption feature for the ip phone allows service providers the capability of storing encrypted files on their server to protect against ...

  • Page 473: Encryption and The Ip Phone

    Encrypted files on the ip phone 41-001160-00, release 2.1, rev 04 7-3 encrypted files on the ip phone encryption and the ip phone to make changes to the configuration files, the system administrator must decrypt the files, make the changes, and re-encrypt the files. The encrypted files must then be ...

  • Page 474: Encryption and The Ip Phone

    Encrypted files on the ip phone 7-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide encryption and the ip phone examples the following examples illustrate the use of the anacrypt.Exe file. Example 1 encrypt aastra.Cfg into aastra.Tuz using password 1234abcd: c:\> anacrypt aastra.Cfg -...

  • Page 475: Encryption and The Ip Phone

    Encrypted files on the ip phone 41-001160-00, release 2.1, rev 04 7-5 encrypted files on the ip phone encryption and the ip phone example 7 use the "-v" variable to display version number. C:\> anacrypt -v the encryption tag format supported by this anacrypt is: tuzo v1.3 rev1 the corresponding ip p...

  • Page 477: Firmware Upgrade

    41-001160-00, release 2.1, rev 04 8-1 firmware upgrade chapter 8 upgrading the firmware about this chapter introduction this chapter provides information about upgrading the ip phone firmware. Topics this chapter covers the following topics: topic page upgrading the firmware page 8-2 manual firmware...

  • Page 478: Firmware Upgrade

    Upgrading the firmware 8-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide firmware upgrade upgrading the firmware the ip phone uses a tftp, ftp, or http server (depending on the protocol configured on the ip phone) to download configuration files and firmware. The configuration serve...

  • Page 479: Firmware Upgrade

    Upgrading the firmware 41-001160-00, release 2.1, rev 04 8-3 upgrading the firmware firmware upgrade aastra web ui step action 1 click on advanced settings->firmware update. 2 enter the tftp server ip address or qualified domain name in the "tftp server ip" field. 3 enter the firmware file name (.St...

  • Page 480: Firmware Upgrade

    Upgrading the firmware 8-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide firmware upgrade manual firmware and configuration file update restarting the phone forces the phone to check for both firmware and configuration files stored on the configuration server. Restarting the phone u...

  • Page 481: Firmware Upgrade

    Upgrading the firmware 41-001160-00, release 2.1, rev 04 8-5 upgrading the firmware firmware upgrade restarting the phone using the aastra web ui aastra web ui 1 click on operation->reset->phone. 2 click to restart the phone..

  • Page 482: Firmware Upgrade

    Upgrading the firmware 8-6 41-001160-00, release 2.1, rev 04 ip phone administrator guide firmware upgrade automatic update (auto-resync) the auto-resync feature on the ip phones allows an administrator to enable the phone to be updated automatically once a day at a specific time in a 24-hour period...

  • Page 483: Firmware Upgrade

    Upgrading the firmware 41-001160-00, release 2.1, rev 04 8-7 upgrading the firmware firmware upgrade configuring automatic update use the following procedures to configure automatic update of the ip phone firmware, configuration files, or both. Notes: 1. If a user is accessing the aastra web ui, the...

  • Page 484: Firmware Upgrade

    Upgrading the firmware 8-8 41-001160-00, release 2.1, rev 04 ip phone administrator guide firmware upgrade aastra web ui step action 1 click on advanced settings->configuration server->auto-resync. 2 select the auto-resync mode from the mode field. Valid values are none, configuration files, firmwar...

  • Page 485: Firmware Upgrade

    Upgrading the firmware 41-001160-00, release 2.1, rev 04 8-9 upgrading the firmware firmware upgrade reference for more information about setting automatic update on the ip phone, see the "auto resync mode" and "auto resync time" parameters, see appendix a, the section, “configuration server setting...

  • Page 487: Roubleshooting

    About this chapter 41-001160-00, release 2.1, rev 04 9-1 troubleshooting t roubleshooting chapter 9 troubleshooting about this chapter introduction this chapter describes tasks that a system administrator can perform on the ip phones for troubleshooting purposes. It also includes answers to question...

  • Page 488: Roubleshooting

    Troubleshooting 9-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide t roubleshooting troubleshooting this section describes tasks that a system administrator can perform on the ip phones for troubleshooting purposes. Using the aastra web ui, a system administrator can: • assign an ip ...

  • Page 489: Roubleshooting

    Troubleshooting 41-001160-00, release 2.1, rev 04 9-3 troubleshooting t roubleshooting in the aastra web ui, you use the following parameters to configure log settings: • log ip - the ip address for which to save log files for troubleshooting purposes. • log port - the ip port to use to save log fil...

  • Page 490: Roubleshooting

    Troubleshooting 9-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide t roubleshooting in the configuration files and the aastra web ui, you can enable or disable each module by setting the values of 1 (enable) or 0 (disable). Support information you can save the local and/or server con...

  • Page 491: Roubleshooting

    Troubleshooting 41-001160-00, release 2.1, rev 04 9-5 troubleshooting t roubleshooting aastra web ui step action 1 click on advanced settings->troubleshooting. To set log settings: 2 in the "log ip" field, enter the ip address of where you want log files to be stored. 3 in the "log port" field, ente...

  • Page 492: Roubleshooting

    Troubleshooting 9-6 41-001160-00, release 2.1, rev 04 ip phone administrator guide t roubleshooting reference for information that describes solutions to most common problems using the ip phones, see the next section, “troubleshooting solutions” on page 9-7. 4 click to save your settings. 5 click on...

  • Page 493: Roubleshooting

    Troubleshooting solutions 41-001160-00, release 2.1, rev 04 9-7 troubleshooting t roubleshooting troubleshooting solutions description this section describes solutions to some most common problems that can occur while using the ip phones. Why does my phone display “application missing”? If you have ...

  • Page 494: Roubleshooting

    Troubleshooting solutions 9-8 41-001160-00, release 2.1, rev 04 ip phone administrator guide t roubleshooting please ensure that the tftp server is running and accessible on the network. If the firmware file is correctly located on the running tftp server, the phone will locate the file and reload t...

  • Page 495: Roubleshooting

    Troubleshooting solutions 41-001160-00, release 2.1, rev 04 9-9 troubleshooting t roubleshooting reason: neither of the .Tuz and aastra.Tuz files are present on the configuration server (tftp/ftp/http). Fix: create the encrypted files using anacrypt.Exe and copy them to the configuration server. Rea...

  • Page 496: Roubleshooting

    Troubleshooting solutions 9-10 41-001160-00, release 2.1, rev 04 ip phone administrator guide t roubleshooting how do i restart the ip phone? Ip phone ui step action 1 press on the phone to enter the options list. 2 select restart phone. 3 for 53i: press # to confirm. Note: to cancel the restart, pr...

  • Page 497: Roubleshooting

    Troubleshooting solutions 41-001160-00, release 2.1, rev 04 9-11 troubleshooting t roubleshooting how do i set the ip phone to factory default? Ip phone ui step action 1 press on the phone to enter the options list. 2 selectadministrator menuand enter your administrator password (default is 22222). ...

  • Page 498: Roubleshooting

    Troubleshooting solutions 9-12 41-001160-00, release 2.1, rev 04 ip phone administrator guide t roubleshooting how do i erase the phone’s local configuration? Ip phone ui step action 1 press on the phone to enter the options list. 2 selectadministrator menuand enter your administrator password (defa...

  • Page 499: Roubleshooting

    Troubleshooting solutions 41-001160-00, release 2.1, rev 04 9-13 troubleshooting t roubleshooting how to reset a user’s password? Ip phone ui 1 press on the phone to enter the options list. 2 select user password. 3 enter the current user password. 4 press enter. 5 enter the new user password. Note:...

  • Page 500: Roubleshooting

    Troubleshooting solutions 9-14 41-001160-00, release 2.1, rev 04 ip phone administrator guide t roubleshooting how do i lock and unlock the phone? Ip phone ui step action lock the phone: 1 press on the phone to enter the options list. 2 select phone lock. The prompt, “lock the phone?” displays. 3 pr...

  • Page 501: Roubleshooting

    Troubleshooting solutions 41-001160-00, release 2.1, rev 04 9-15 troubleshooting t roubleshooting aastra web ui 1 click on operation->phone lock. Lock the phone: 2 in the “lock the phone?” field, click . The phone locks dyanamically and displays the following message: “phone is locked”. Unlock the p...

  • Page 503: Appendix A

    About this appendix 41-001160-00, release 2.1, rev 04 a-1 configuration parameters appendix a appendix a configuration parameters about this appendix introduction this appendix describes the parameters you can set in the configuration files for the ip phones. The configuration files include and conf...

  • Page 504: Appendix A

    About this appendix a-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a time server settings page a-31 time and date settings page a-33 sip local dial plan settings page a-39 sip basic, global settings page a-41 sip basic, per-line settings page a-50 centralized conferencin...

  • Page 505: Appendix A

    About this appendix 41-001160-00, release 2.1, rev 04 a-3 configuration parameters appendix a intercom, auto-answer, and barge in settings page a-121 audio transmit and receive gain adjustment settings page a-125 directed call pickup (blf or xml call interception) settings page a-128 acd auto-availa...

  • Page 506: Appendix A

    Setting parameters in configuration files a-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a setting parameters in configuration files you can set specific configuration parameters in the configuration files for configuring you ip phone. The aastra.Cfg and .Cfg files are s...

  • Page 507: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-5 configuration parameters appendix a operational, basic, and advanced parameters the following sections provide the configuration parameters you can configure on the ip phone. Each parameter table includes the name of t...

  • Page 508: Appendix A

    Operational, basic, and advanced parameters a-6 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a network settings parameter – dhcp dhcp (in web ui) ip phone ui options->administrator menu-> network settings aastra web ui advanced settings->network-> basic network settings co...

  • Page 509: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-7 configuration parameters appendix a parameter – subnet mask subnet mask (in web ui) ip phone ui options->administrator menu-> network settings aastra web ui advanced settings->network-> basic network settings configura...

  • Page 510: Appendix A

    Operational, basic, and advanced parameters a-8 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – dns2 secondary dns (in web ui) ip phone ui options->administrator menu-> network settings aastra web ui advanced settings->network-> basic network settings configurat...

  • Page 511: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-9 configuration parameters appendix a password settings parameter – ethernet port 1 pc port (in web ui) ip phone ui options->administrator menu-> network settings aastra web ui advanced settings->network-> basic network ...

  • Page 512: Appendix A

    Operational, basic, and advanced parameters a-10 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – user password current password (in web ui) ip phone ui options->user password aastra web ui operation->user password configuration files aastra.Cfg, .Cfg description...

  • Page 513: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-11 configuration parameters appendix a emergency dial plan settings parameter – emergency dial plan configuration files aastra.Cfg, .Cfg aastra web ui operation->phone lock description allows you to specify an emergency ...

  • Page 514: Appendix A

    Operational, basic, and advanced parameters a-12 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a aastra web ui settings parameter – options password enabled configuration files aastra.Cfg, .Cfg description enables or disables password protection of the options key on the ip...

  • Page 515: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-13 configuration parameters appendix a configuration server settings parameter – download protocol download protocol (in web ui) ip phone ui options->administrator menu-> network settings aastra web ui advanced settings-...

  • Page 516: Appendix A

    Operational, basic, and advanced parameters a-14 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – alternate tftp server alternate tftp (in web ui) ip phone ui options->administrator menu-> network settings->tftp server-> alternate tftp aastra web ui advanced sett...

  • Page 517: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-15 configuration parameters appendix a parameter – ftp server ftp server (in web ui) ip phone ui options->administrator menu-> network settings->ftp server aastra web ui advanced settings->configuration server configurat...

  • Page 518: Appendix A

    Operational, basic, and advanced parameters a-16 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – ftp password ftp password (in web ui) ip phone ui options->administrator menu-> network settings->ftp server aastra web ui advanced settings->configuration server co...

  • Page 519: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-17 configuration parameters appendix a parameter – https server https server (in web ui) ip phone ui options->administrator menu-> network settings->https-> https client->download server aastra web ui advanced settings->...

  • Page 520: Appendix A

    Operational, basic, and advanced parameters a-18 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – auto resync mode mode (in web ui) aastra web ui advanced settings->configuration server-> auto-resync configuration files aastra.Cfg, .Cfg description enables and di...

  • Page 521: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-19 configuration parameters appendix a parameter – auto resync time time (24-hour) (in web ui) aastra web ui advanced settings->configuration server-> auto-resync configuration files aastra.Cfg, .Cfg description sets the...

  • Page 522: Appendix A

    Operational, basic, and advanced parameters a-20 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a network address translation (nat) settings parameter – sip nat ip nat ip (in web ui) ip phone ui options->administrator menu->sip settings aastra web ui advanced settings->netwo...

  • Page 523: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-21 configuration parameters appendix a parameter – sip nat rtp port nat rtp port (in phone ui and web ui) ip phone ui options->administrator menu-> sip settings->rtp port base aastra web ui advanced settings->network-> a...

  • Page 524: Appendix A

    Operational, basic, and advanced parameters a-22 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip nortel nat timer nortel nat timer (in web ui) aastra web ui advanced settings->network configuration files aastra.Cfg, .Cfg description the interval, in seconds,...

  • Page 525: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-23 configuration parameters appendix a https client and server settings parameter – https client method https client method (in web ui) ip phone ui options->administrator menu-> network settings->https->https client aast...

  • Page 526: Appendix A

    Operational, basic, and advanced parameters a-24 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – https block http post xml https server - block xml http posts (in web ui) ip phone ui options->administrator menu-> network settings->https-> https server->xml aastr...

  • Page 527: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-25 configuration parameters appendix a upnp settings parameter – upnp manager upnp (in web ui) ip phone ui options->administrator menu-> network settings->upnp aastra web ui advanced settings->network-> advanced network ...

  • Page 528: Appendix A

    Operational, basic, and advanced parameters a-26 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a virtual local area network (vlan) settings global parameters parameter – upnp mapping lines upnp mapping lines (in web ui) aastra web ui basic settings->preferences->general con...

  • Page 529: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-27 configuration parameters appendix a lan port (ethernet port 0) parameters parameter – priority non-ip priority, non-ip packet (in web ui) ip phone ui options->administrator menu-> network settings->vlan->phone->priori...

  • Page 530: Appendix A

    Operational, basic, and advanced parameters a-28 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a the following table identifies the default dscp-to-priority mapping structure. Parameter – tos priority map sip priority rtp priority rtcp priority (for lan port in web ui) ip p...

  • Page 531: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-29 configuration parameters appendix a pc port (ethernet port 1) parameters parameter – vlan id port 1 vlan id (for pc port in web ui) ip phone ui options->administrator menu-> network settings->vlan-> passthrough->vlan ...

  • Page 532: Appendix A

    Operational, basic, and advanced parameters a-30 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a type of service (tos)/dscp settings parameter – tos sip sip (in web ui) ip phone ui options->administrator menu-> network settings->type of service->sip aastra web ui advanced s...

  • Page 533: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-31 configuration parameters appendix a time server settings parameter – time server disabled ntp time servers (in web ui) aastra web ui advanced settings->network-> advanced network settings configuration files aastra.Cf...

  • Page 534: Appendix A

    Operational, basic, and advanced parameters a-32 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – time server2 time server 2 (in web ui) aastra web ui advanced settings->network-> advanced network settings configuration files aastra.Cfg, .Cfg description the seco...

  • Page 535: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-33 configuration parameters appendix a time and date settings parameter – time format time format (in phone ui) ip phone ui options->time and date->time format configuration files aastra.Cfg, .Cfg description this parame...

  • Page 536: Appendix A

    Operational, basic, and advanced parameters a-34 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – dst config daylight savings (in phone ui) ip phone ui options->time and date->daylight savings configuration files aastra.Cfg, .Cfg description enables/disables the ...

  • Page 537: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-35 configuration parameters appendix a time zone name/time zone code table time zone name time zone code ad-andorra ag-antigua ai-anguilla al-tirane an-curacao ar-buenos aires as-pago pago at-vienna au-lord howe au-tasma...

  • Page 538: Appendix A

    Operational, basic, and advanced parameters a-36 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a ca-newfoundland ca-atlantic ca-eastern ca-saskatchewan ca-central ca-mountain ca-pacific ca-yukon ch-zurich ck-rarotonga cl-santiago cl-easter cn-china co-bogota cr-costa rica c...

  • Page 539: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-37 configuration parameters appendix a hk-hong kong hn-tegucigalpa hr-zagreb ht-port-au-prince hu-budapest hks cst cet est cet ie-dublin is-reykjavik it-rome gmt gmt cet jm-jamaica jp-tokyo est jst ky-cayman est lc-st lu...

  • Page 540: Appendix A

    Operational, basic, and advanced parameters a-38 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a pa-panama pe-lima pl-warsaw pr-puerto rico pt-lisbon pt-madeira pt-azores py-asuncion est pes cet ast wet wet azo pys ro-bucharest ru-kaliningrad ru-moscow ru-samara ru-yekateri...

  • Page 541: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-39 configuration parameters appendix a sip local dial plan settings ) va-vatican cet yu-belgrade cet parameter – sip dial plan local dial plan (in web ui) aastra web ui basic settings->preferences configuration files aas...

  • Page 542: Appendix A

    Operational, basic, and advanced parameters a-40 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip dial plan terminator send dial plan terminator (in web ui) aastra web ui basic settings->preferences configuration files aastra.Cfg, .Cfg description allows you ...

  • Page 543: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-41 configuration parameters appendix a sip basic, global settings sip global authentication settings parameter – sip screen name screen name (in web ui) ip phone ui options->administrator menu->sip settings aastra web ui...

  • Page 544: Appendix A

    Operational, basic, and advanced parameters a-42 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip user name phone number (in web ui) ip phone ui options->administrator menu->sip settings aastra web ui advanced settings->global sip-> basic sip settings configu...

  • Page 545: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-43 configuration parameters appendix a parameter – sip auth name authentication name (in web ui) ip phone ui options->administrator menu->>sip settings aastra web ui advanced settings->global sip-> basic sip settings con...

  • Page 546: Appendix A

    Operational, basic, and advanced parameters a-44 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip bla number bla number (in web ui) aastra web ui advanced settings->global sip-> basic sip settings configuration files aastra.Cfg, .Cfg description allows you to...

  • Page 547: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-45 configuration parameters appendix a sip global network settings. Parameter – sip proxy ip proxy server (in web ui) ip phone ui options->administrator menu->sip settings aastra web ui advanced settings->global sip-> ba...

  • Page 548: Appendix A

    Operational, basic, and advanced parameters a-46 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip backup proxy ip backup proxy server (in web ui) aastra web ui advanced settings->global sip-> basic sip network settings configuration files aastra.Cfg, .Cfg des...

  • Page 549: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-47 configuration parameters appendix a parameter – sip outbound proxy port outbound proxy port (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration files aastra.Cfg, .Cfg descript...

  • Page 550: Appendix A

    Operational, basic, and advanced parameters a-48 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip registrar port registrar port (in web ui) ip phone ui options->administrator menu->sip settings aastra web ui advanced settings->global sip-> basic sip settings ...

  • Page 551: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-49 configuration parameters appendix a parameter – sip backup registrar port backup registrar port (in web ui) aastra web ui advanced settings->global sip-> basic sip network settings configuration files aastra.Cfg, .Cfg...

  • Page 552: Appendix A

    Operational, basic, and advanced parameters a-50 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a sip basic, per-line settings the following parameters are sip per-line settings. The value of "n" is 1 - 9 for 53i, 55i, 57i, and 57i ct. Sip per-line authentication settings pa...

  • Page 553: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-51 configuration parameters appendix a parameter – sip linen user name phone number (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description used in the name field of th...

  • Page 554: Appendix A

    Operational, basic, and advanced parameters a-52 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip linen auth name authentication name (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description used in the usern...

  • Page 555: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-53 configuration parameters appendix a parameter – sip linen bla number bla number (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description allows you to assign a phone ...

  • Page 556: Appendix A

    Operational, basic, and advanced parameters a-54 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip linen mode line mode (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description allows you to configure the mode...

  • Page 557: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-55 configuration parameters appendix a sip per-line network settings. Parameter – sip linen proxy ip proxy server (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg descriptio...

  • Page 558: Appendix A

    Operational, basic, and advanced parameters a-56 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip linex backup proxy ip backup proxy server (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description the ip addr...

  • Page 559: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-57 configuration parameters appendix a parameter – sip linen outbound proxy port outbound proxy port (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description the proxy p...

  • Page 560: Appendix A

    Operational, basic, and advanced parameters a-58 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip linen registrar port registrar port (in web ui) aastra web ui advanced settings->line 1 thru 9 configuration files aastra.Cfg, .Cfg description the registrar's p...

  • Page 561: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-59 configuration parameters appendix a parameter – sip linex backup registrar port backup registrar port (in web ui) aastra web ui advanced settings->linen-> basic sip network settings configuration files aastra.Cfg, .Cf...

  • Page 562: Appendix A

    Operational, basic, and advanced parameters a-60 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a centralized conferencing settings global settings parameter – sip centralized conf conference server uri (in web ui) aastra web ui advanced->global sip settings-> basic sip netw...

  • Page 563: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-61 configuration parameters appendix a per-line settings parameter – sip linen centralized conf conference server uri (in web ui) aastra web ui advanced->line -> basic sip network settings configuration files aastra.Cfg,...

  • Page 564: Appendix A

    Operational, basic, and advanced parameters a-62 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a advanced sip settings parameter – sip explicit mwi subscription explicit mwi subscription (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configu...

  • Page 565: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-63 configuration parameters appendix a . Parameter – sip send mac send mac address in register message (in web ui) aastra web ui: advanced settings->global sip-> advanced sip settings configuration files aastra.Cfg, .Cfg...

  • Page 566: Appendix A

    Operational, basic, and advanced parameters a-64 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip session timer session timer (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration files aastra.Cfg, .Cfg description the ...

  • Page 567: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-65 configuration parameters appendix a parameter – sip t2 timer t2 timer (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration files aastra.Cfg, .Cfg description this timer is a si...

  • Page 568: Appendix A

    Operational, basic, and advanced parameters a-66 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip transport protocol transport protocol (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration files aastra.Cfg, .Cfg descri...

  • Page 569: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-67 configuration parameters appendix a parameter – sip registration retry timer registration failed retry timer (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration files aastra.C...

  • Page 570: Appendix A

    Operational, basic, and advanced parameters a-68 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip registration renewal timer registration renewal timer (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings configuration files aastra....

  • Page 571: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-69 configuration parameters appendix a parameter – sip acd subscription period acd subscription period (in web ui) aastra web ui advanced settings->global sip ->advanced sip settings configuration files aastra.Cfg, .Cfg ...

  • Page 572: Appendix A

    Operational, basic, and advanced parameters a-70 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a missed call summary subscription settings global parameters parameter – sip missed call summary subscription missed call summary subscription (in web ui) aastra web ui advanced ...

  • Page 573: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-71 configuration parameters appendix a per-line parameter parameter – sip missed call summary subscription period missed call summary subscription period (in web ui) aastra web ui advanced settings->global sip-> advanced...

  • Page 574: Appendix A

    Operational, basic, and advanced parameters a-72 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a transport layer security (tls) settings parameter – sip transport protocol transport protocol (in web ui) aastra web ui advanced settings->global sip-> advanced sip settings con...

  • Page 575: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-73 configuration parameters appendix a parameter – sips persistent tls configuration files aastra.Cfg, .Cfg description enables or disables the use of persistent transport layer security (tls). Persistent tls sets up the...

  • Page 576: Appendix A

    Operational, basic, and advanced parameters a-74 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sips root and intermediate certificates root and intermediate certificates (in web ui) aastra web ui advanced settings->tls support configuration files aastra.Cfg, ....

  • Page 577: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-75 configuration parameters appendix a parameter – sips local certificate local certificate (in web ui) aastra web ui advanced settings->tls support configuration files aastra.Cfg, .Cfg description allows you to specify ...

  • Page 578: Appendix A

    Operational, basic, and advanced parameters a-76 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sips trusted certificates trusted certificates (in web ui) aastra web ui advanced settings->tls support configuration files aastra.Cfg, .Cfg description allows you t...

  • Page 579: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-77 configuration parameters appendix a rtp, codec, dtmf global settings global settings parameter – sip rtp port rtp port base (in ip phone ui) rtp port (in web ui) ip phone ui options->administrator menu-> sip settings-...

  • Page 580: Appendix A

    Operational, basic, and advanced parameters a-78 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip out-of-band dtmf force rfc2833 out-of-band dtmf (in web ui) aastra web ui advanced settings->global sip->rtp settings configuration files aastra.Cfg, .Cfg descri...

  • Page 581: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-79 configuration parameters appendix a parameter – sip dtmf method dtmf method (in web ui) aastra web ui advanced settings->global sip->rtp settings configuration files aastra.Cfg, .Cfg description sets the dual-tone mul...

  • Page 582: Appendix A

    Operational, basic, and advanced parameters a-80 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a per-line settings parameter – sip silence suppression silence suppression (in web ui) aastra web ui advanced settings->global sip->rtp settings configuration files aastra.Cfg, ....

  • Page 583: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-81 configuration parameters appendix a autodial settings global settings parameter – sip linen srtp mode aastra web ui advanced settings->line ->rtp settings configuration files aastra.Cfg, .Cfg description this paramete...

  • Page 584: Appendix A

    Operational, basic, and advanced parameters a-82 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip autodial timeout autodial timeout (in web ui) aastra web ui advanced settings>global sip> autodial settings configuration files aastra.Cfg, .Cfg description glob...

  • Page 585: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-83 configuration parameters appendix a per-line settings parameter – sip linen autodial number autodial number (in web ui) aastra web ui advanced settings>linen>autodial settings configuration files aastra.Cfg, .Cfg desc...

  • Page 586: Appendix A

    Operational, basic, and advanced parameters a-84 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a voicemail settings parameter – sip linen vmail note: the value of "n" is 1 - 9 for 53i, 55i, 57i, 57i ct. Configuration files aastra.Cfg, .Cfg description use this parameter in ...

  • Page 587: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-85 configuration parameters appendix a directory settings parameter – directory 1 directory list (in web ui) aastra web ui operation->directory configuration files aastra.Cfg, .Cfg description the name of a directory lis...

  • Page 588: Appendix A

    Operational, basic, and advanced parameters a-86 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a callers list settings customize callers list and services key parameter – callers list disabled configuration files aastra.Cfg, .Cfg description enables or disables the callers ...

  • Page 589: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-87 configuration parameters appendix a call forward settings parameter – call forward disabled configuration files aastra.Cfg, .Cfg description enables or disables the ability to configure call forwarding. If this parame...

  • Page 590: Appendix A

    Operational, basic, and advanced parameters a-88 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a missed calls indicator settings parameter – missed calls indicator disabled configuration files aastra.Cfg, .Cfg description enables or disables the missed calls indicator. If t...

  • Page 591: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-89 configuration parameters appendix a xml settings parameter – xml get timeout configuration files aastra.Cfg, .Cfg description allows you to specify a timeout value, in seconds, that the phone waits for the far side to...

  • Page 592: Appendix A

    Operational, basic, and advanced parameters a-90 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – xml application title xml application title (in web ui) aastra web ui operation->softkeys and xml->services configuration files aastra.Cfg, .Cfg description this par...

  • Page 593: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-91 configuration parameters appendix a parameter – xml beep notification xml beep support (in web ui) aastra web ui basic settings->preferences configuration files aastra.Cfg, .Cfg description enables or disables a beep ...

  • Page 594: Appendix A

    Operational, basic, and advanced parameters a-92 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a action uri settings parameter – action uri startup startup (in web ui) aastra web ui advanced settings->action uri configuration files aastra.Cfg, .Cfg description specifies the...

  • Page 595: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-93 configuration parameters appendix a parameter – action uri incoming incoming call (in web ui) aastra web ui advanced settings->action uri configuration files aastra.Cfg, .Cfg description specifies the uri for which th...

  • Page 596: Appendix A

    Operational, basic, and advanced parameters a-94 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a ring tone and tone set global settings parameter – action uri offhook offhook (in web ui) aastra web ui advanced settings->action uri configuration files aastra.Cfg, .Cfg descri...

  • Page 597: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-95 configuration parameters appendix a range aastra web ui & ip phone ui tone 1 tone 2 tone 3 tone 4 tone 5 silent configuration files 0 (tone 1) 1 (tone 2) 2 (tone 3) 3 (tone 4) 4 (tone 5) 5 (silent) example ring tone: ...

  • Page 598: Appendix A

    Operational, basic, and advanced parameters a-96 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – tone set tone set (in web ui) ip phone ui options->tones->tone set aastra web ui: basic settings->preferences->ring tones configuration files aastra.Cfg, .Cfg descri...

  • Page 599: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-97 configuration parameters appendix a ring tone per-line settings parameter – linen ring tone line n (in web ui) aastra web ui: basic settings->preferences->ring tones configuration files aastra.Cfg, .Cfg description se...

  • Page 600: Appendix A

    Operational, basic, and advanced parameters a-98 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a incoming call interrupts dialing setting parameter – incoming call interrupts dialing incoming call interrupts dialing (in web ui) aastra web ui: basic settings->preferences->ge...

  • Page 601: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-99 configuration parameters appendix a goodbye key cancels incoming call parameter – goodbye cancels incoming call goodbye key cancels incoming call (in web ui) aastra web ui: basic settings->preferences->general configu...

  • Page 602: Appendix A

    Operational, basic, and advanced parameters a-100 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a stuttered dial tone setting parameter – stutter disabled stuttered dial tone (in web ui) aastra web ui: basic settings->preferences->general configuration files aastra.Cfg, .Cf...

  • Page 603: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-101 configuration parameters appendix a call waiting settings parameter – call waiting call waiting (in web ui) aastra web ui basic settings->preferences->general configuration files aastra.Cfg, .Cfg description allows y...

  • Page 604: Appendix A

    Operational, basic, and advanced parameters a-102 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a message waiting indicator settings parameter – call waiting tone play call waiting tone (in web ui) aastra web ui: basic settings->preferences->general configuration files aast...

  • Page 605: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-103 configuration parameters appendix a priority alert settings for sylantro server only parameter – priority alerting enabled enable priority alerting (in web ui) aastra web ui: basic settings->preferences-> priority al...

  • Page 606: Appendix A

    Operational, basic, and advanced parameters a-104 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – alert community 1 community-1 (in web ui) aastra web ui: basic settings->preferences-> priority alerting settings configuration files aastra.Cfg, .Cfg description w...

  • Page 607: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-105 configuration parameters appendix a parameter – alert community 3 community-3 (in web ui) aastra web ui: basic settings->preferences-> priority alerting settings configuration files aastra.Cfg, .Cfg description when ...

  • Page 608: Appendix A

    Operational, basic, and advanced parameters a-106 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – alert external alert external (in web ui) aastra web ui: basic settings->preferences-> priority alerting settings configuration files aastra.Cfg, .Cfg description w...

  • Page 609: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-107 configuration parameters appendix a parameter – alert group group (in web ui) aastra web ui: basic settings->preferences-> priority alerting settings configuration files aastra.Cfg, .Cfg description when an "alert gr...

  • Page 610: Appendix A

    Operational, basic, and advanced parameters a-108 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – alert priority alert priority (in web ui) aastra web ui: basic settings->preferences-> priority alerting settings configuration files aastra.Cfg, .Cfg description w...

  • Page 611: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-109 configuration parameters appendix a language settings parameter – language webpage language (in web ui) ip phone ui options->language aastra web ui basic settings->preferences-> language settings->webpage language co...

  • Page 612: Appendix A

    Operational, basic, and advanced parameters a-110 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a language pack settings parameter – language n language n (in web ui) where “n” can be 1, 2, 3, or 4 aastra web ui basic settings->preferences-> language settings configuration ...

  • Page 613: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-111 configuration parameters appendix a the following table identifies the language code to use for the ip phone language packs. Language codes (from standard iso 639) the following table identifies the country codes to ...

  • Page 614: Appendix A

    Operational, basic, and advanced parameters a-112 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a bahamas bahrain bangladesh barbados belarus belgium belize benin bermuda bhutan bolivia bosnia and herzegovina botswana bouvet island brazil british indian ocean territory brun...

  • Page 615: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-113 configuration parameters appendix a denmark djibouti dominica dominican republic dk dj dm do ecuador egypt el salvador equatorial guinea eritrea estonia ethiopia ec eg sv gq er ee et falkland islands (malvinas) faroe...

  • Page 616: Appendix A

    Operational, basic, and advanced parameters a-114 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a iceland india indonesia iran, islamic republic of iraq ireland isle of man israel italy is in id ir iq ie im il it jamaica japan jersey jordan jm jp je jo kazakhstan kenya kiri...

  • Page 617: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-115 configuration parameters appendix a macao macedonia, the former yugoslav republic of madagascar malawi malaysia maldives mali malta marshall islands martinique mauritania mauritius mayotte mexico micronesia, federate...

  • Page 618: Appendix A

    Operational, basic, and advanced parameters a-116 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a pakistan palau palestinian territory, occupied panama papua new guinea paraguay peru philippines pitcairn poland portugal puerto rico pk pw ps pa pg py pe ph pn pl pt pr qatar ...

  • Page 619: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-117 configuration parameters appendix a saint helena saint kitts and nevis saint lucia saint pierre and miquelon saint vincent and the grenadines samoa san marino sao tome and principe saudi arabia senegal serbia seychel...

  • Page 620: Appendix A

    Operational, basic, and advanced parameters a-118 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a uganda ukraine united arab emirates united kingdom united states united states minor outlying islands uruguay uzbekistan ug ta ae gb us tm uy uz vanuatu vatican city state vene...

  • Page 621: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-119 configuration parameters appendix a suppress dtmf playback setting parameter – suppress dtmf playback suppress dtmf playback (in web ui) aastra web ui basic settings->preferences configuration files aastra.Cfg, .Cfg ...

  • Page 622: Appendix A

    Operational, basic, and advanced parameters a-120 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a display dtmf digits setting parameter – display dtmf digits display dtmf digits (in web ui) aastra web ui basic settings->preferences->general configuration files aastra.Cfg, ....

  • Page 623: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-121 configuration parameters appendix a intercom, auto-answer, and barge in settings outgoing intercom settings parameter – sip intercom type type (in web ui) aastra web ui basic settings->preferences-> outgoing intercom...

  • Page 624: Appendix A

    Operational, basic, and advanced parameters a-122 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip intercom prefix code prefix code (in web ui) aastra web ui basic settings->preferences-> outgoing intercom settings configuration files aastra.Cfg, .Cfg descrip...

  • Page 625: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-123 configuration parameters appendix a incoming intercom settings parameter – sip allow auto answer auto-answer (in web ui) aastra web ui basic settings->preferences-> incoming intercom settings configuration files aast...

  • Page 626: Appendix A

    Operational, basic, and advanced parameters a-124 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – sip play warning tone play warning tone (in web ui) aastra web ui basic settings->preferences-> incoming intercom settings configuration files aastra.Cfg, .Cfg desc...

  • Page 627: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-125 configuration parameters appendix a audio transmit and receive gain adjustment settings parameter – headset tx gain configuration files aastra.Cfg, .Cfg description this is the increased (+db) or decreased (-db) amou...

  • Page 628: Appendix A

    Operational, basic, and advanced parameters a-126 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – handset tx gain configuration files aastra.Cfg, .Cfg description this is the increased (+db) or decreased (-db) amount of signal transmitted from the handset microp...

  • Page 629: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-127 configuration parameters appendix a parameter – handsfree tx gain configuration files aastra.Cfg, .Cfg description this is the increased (+db) or decreased (-db) amount of signal transmitted from the base microphone ...

  • Page 630: Appendix A

    Operational, basic, and advanced parameters a-128 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a directed call pickup (blf or xml call interception) settings parameter – directed call pickup directed call pickup (in web ui) aastra web ui basic settings->preferences ->direc...

  • Page 631: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-129 configuration parameters appendix a parameter – directed call pickup prefix directed call pickup by prefix (in web ui) aastra web ui basic settings->preferences-> directed call pickup settings configuration files aas...

  • Page 632: Appendix A

    Operational, basic, and advanced parameters a-130 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – play a ring splash play a ring splash (in web ui) aastra web ui basic settings->preferences ->directed call pickup settings configuration files aastra.Cfg, .Cfg des...

  • Page 633: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-131 configuration parameters appendix a acd auto-available timer settings parameter – acd auto available auto available (in web ui) aastra web ui basic settings->preferences ->auto call distribution settings configuratio...

  • Page 634: Appendix A

    Operational, basic, and advanced parameters a-132 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a park and pickup global settings (57i/57i ct only) parameter – sprecode park call (in web ui) aastra web ui basic settings->preferences configuration files aastra.Cfg, .Cfg desc...

  • Page 635: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-133 configuration parameters appendix a mapping key parameters this section provides the hard key settings you can use to enable and disable the redial, conf, and xfer keys on the ip phone. Parameter – redial disabled co...

  • Page 636: Appendix A

    Operational, basic, and advanced parameters a-134 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – call transfer disabled configuration files aastra.Cfg, .Cfg description enables or disables the xfer key on the ip phone. If this parameter is set to 0, the key is ...

  • Page 637: Appendix A

    Operational, basic, and advanced parameters 41-001160-00, release 2.1, rev 04 a-135 configuration parameters appendix a parameter – map conf key to map conf key to (in web ui) aastra web ui basic settings->preferences->key mapping configuration files aastra.Cfg, .Cfg description sets the conf key as...

  • Page 638: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-136 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a softkey/programmable key/feature key/ expansion module key parameters this section provides the softkey, programmable key, feature key, and expansion m...

  • Page 639: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-137 configuration parameters appendix a softkey settings for 55i, 57i, 57i ct the value of "n" for the following parameters is dependent on the number of softkeys available on the55i, 57i, and 57...

  • Page 640: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-138 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a • flash - indicates the softkey and/or programmable key is set to generate a flash event when it is pressed on the 57i and 57i ct, or a feature key is ...

  • Page 641: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-139 configuration parameters appendix a range none line speeddial dnd ("do not disturb" in the aastra web ui) blf list ("blf\list" in the aastra web ui) acd (“auto call distribution” in the aastr...

  • Page 642: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-140 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – softkeyn label label (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description the text label ...

  • Page 643: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-141 configuration parameters appendix a parameter – softkeyn value value (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description this is the value y...

  • Page 644: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-142 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – softkeyn line line (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description this is the line ...

  • Page 645: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-143 configuration parameters appendix a parameter – softkeyn states idle, connected, incoming, outgoing, busy (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg,...

  • Page 646: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-144 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a range valid values are: idle the phone is not being used. Connected the line currently being displayed is in an active call (or the call is on hold) in...

  • Page 647: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-145 configuration parameters appendix a programmable key settings for 53i and 55i • the value of "n" for the following parameters is dependent on the number of programmable keys available on the ...

  • Page 648: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-146 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a • sprecode - indicates programmable key is configured to automatically activate specific services offered by the server. For example, if the sprecode v...

  • Page 649: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-147 configuration parameters appendix a range none line speeddial dnd ("do not disturb" in the aastra web ui) blf list (“blf/list” in the aastra web ui) acd (“auto call distribution” in the aastr...

  • Page 650: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-148 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – prgkeyn value value (in web ui) aastra web ui operation->programmable keys configuration files aastra.Cfg, .Cfg description this is the val...

  • Page 651: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-149 configuration parameters appendix a parameter– prgkeyn line line (in web ui) aastra web ui operation->programmable keys configuration files aastra.Cfg, .Cfg description this is the line assoc...

  • Page 652: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-150 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a top softkey settings for 57i and 57i ct parameter – topsoftkeyn type top softkeys->type (in web ui) aastra web ui operation->softkeys and xml configura...

  • Page 653: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-151 configuration parameters appendix a • sprecode - indicates the softkey is configured to automatically activate specific services offered by the server. For example, if the sprecode value of *...

  • Page 654: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-152 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a example topsoftkey1 type: line topsoftkey2 type: speeddial topsoftkey3 type: lcr topsoftkey4 type: xml.

  • Page 655: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-153 configuration parameters appendix a parameter – topsoftkeyn label top softkeys->label (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description th...

  • Page 656: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-154 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – topsoftkeyn value top softkeys->value (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg descriptio...

  • Page 657: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-155 configuration parameters appendix a parameter – topsoftkeyn line top softkeys->line (in web ui) aastra web ui operation->softkeys and xml configuration files aastra.Cfg, .Cfg description this...

  • Page 658: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-156 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a handset feature key settings for the 57i ct parameter – featurekeyn type type (in web ui) aastra web ui operation->handset keys configuration files aas...

  • Page 659: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-157 configuration parameters appendix a range none line transfer conference public icom directory callers list park pickup flash example featurekey1 type: line featurekey2 type: public featurekey...

  • Page 660: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-158 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a expansion module key settings for 536m (for all model phones) and 560m (for 55i, 57i, 57i ct phones only) parameter – expmodx keyn type type (in web ui...

  • Page 661: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-159 configuration parameters appendix a format • callers list - indicates the softkey is set for accessing the callers list. • directory - indicates the softkey is set for accessing the directory...

  • Page 662: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-160 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – expmodx keyn label label (in web ui) aastra web ui operation->expansion module n configuration files aastra.Cfg, .Cfg description the text ...

  • Page 663: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-161 configuration parameters appendix a parameter – expmodx keyn value value (in web ui) aastra web ui operation->expansion module n configuration files aastra.Cfg, .Cfg description the text labe...

  • Page 664: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-162 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter – expmodx keyn line line (in web ui) aastra web ui operation->expansion module n configuration files aastra.Cfg, .Cfg description this is the...

  • Page 665: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-163 configuration parameters appendix a locking softkeys and programmable keys parameter– softkeyn locked configuration files aastra.Cfg, .Cfg description locks the specified softkey on the 55i, ...

  • Page 666: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters a-164 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameter– prgkeyn locked configuration files aastra.Cfg, .Cfg description locks the specified top softkey on the 53i or 55i ip phone. Locking the key ...

  • Page 667: Appendix A

    Softkey/programmable key/feature key/expansion module key parameters 41-001160-00, release 2.1, rev 04 a-165 configuration parameters appendix a parameter– expmodx key n locked configuration files aastra.Cfg, .Cfg description locks the specified top softkey on the 5-series expansion module attached ...

  • Page 668: Appendix A

    Customizing 560m expansion module column display a-166 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a customizing 560m expansion module column display expansion module 1 parameter– expanmod1page1left configuration files aastra.Cfg, .Cfg description allows you to specify a ...

  • Page 669: Appendix A

    Customizing 560m expansion module column display 41-001160-00, release 2.1, rev 04 a-167 configuration parameters appendix a parameter– expanmod1page2right configuration files aastra.Cfg, .Cfg description allows you to specify a customized heading for the first 560m expansion module, second page, ri...

  • Page 670: Appendix A

    Customizing 560m expansion module column display a-168 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a expansion module 2 parameter– expanmod2page1left configuration files aastra.Cfg, .Cfg description allows you to specify a customized heading for the second 560m expansion ...

  • Page 671: Appendix A

    Customizing 560m expansion module column display 41-001160-00, release 2.1, rev 04 a-169 configuration parameters appendix a parameter– expanmod2page2right configuration files aastra.Cfg, .Cfg description allows you to specify a customized heading for the second 560m expansion module, second page, r...

  • Page 672: Appendix A

    Customizing 560m expansion module column display a-170 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a expansion module 3 parameter– expanmod3page1left configuration files aastra.Cfg, .Cfg description allows you to specify a customized heading for the third 560m expansion m...

  • Page 673: Appendix A

    Customizing 560m expansion module column display 41-001160-00, release 2.1, rev 04 a-171 configuration parameters appendix a parameter– expanmod3page2right configuration files aastra.Cfg, .Cfg description allows you to specify a customized heading for the third 560m expansion module, second page, ri...

  • Page 674: Appendix A

    Advanced operational parameters a-172 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a advanced operational parameters the following parameters in this section allow the system administrator to set advanced operational features on the ip phones. Blind transfer setting parame...

  • Page 675: Appendix A

    Advanced operational parameters 41-001160-00, release 2.1, rev 04 a-173 configuration parameters appendix a update caller id setting. Boot sequence recovery mode. Parameter – sip update callerid configuration files aastra.Cfg, .Cfg description enables or disables the updating of the caller id inform...

  • Page 676: Appendix A

    Advanced operational parameters a-174 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a single call restriction parameter – two call support two call support (in web ui) aastra web ui advanced settings->global sip->rtp settings configuration files aastra.Cfg, .Cfg description...

  • Page 677: Appendix A

    Advanced operational parameters 41-001160-00, release 2.1, rev 04 a-175 configuration parameters appendix a blacklist duration whitelist proxy parameter – sip blacklist duration blacklist duration (aastra web ui) aastra web ui advanced settings->global sip settings-> advanced sip settings configurat...

  • Page 678: Appendix A

    Advanced operational parameters a-176 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a symmetric udp signaling setting user-agent setting parameter – sip symmetric udp signaling configuration files aastra.Cfg, .Cfg description allows you to enable or disable the phone to use...

  • Page 679: Appendix A

    Troubleshooting parameters 41-001160-00, release 2.1, rev 04 a-177 configuration parameters appendix a troubleshooting parameters the following parameters in this section allow the system administrator to set logging and support settings for troubleshooting purposes. Log settings parameter – log ser...

  • Page 680: Appendix A

    Troubleshooting parameters a-178 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix a parameters – log module module/debug level (in web ui) aastra web ui advanced settings->troubleshooting-> module/debug level configuration files aastra.Cfg, .Cfg description allows enhanced sev...

  • Page 681: Appendix B

    41-001160-00, release 2.1, rev 04 b-1 appendix b appendix b configuration server setup about this appendix introduction this appendix describes how to setup the tftp protocol configuration server in your network. Topics this appendix covers the following topics: topic page configuration server proto...

  • Page 682: Appendix B

    Configuration server protocol setup b-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix b configuration server protocol setup tftp server set-up there are a number of tftp servers available. Pumpkin is one of such tftp servers. Use the keywords “pumpkin tftp server” on google...

  • Page 683: Appendix B

    Configuration server protocol setup 41-001160-00, release 2.1, rev 04 b-3 configuration server setup appendix b if you want to prevent users from writing files to the directory select the “deny all requests” in the “write request behavior” category. Click the ok button after you have entered all the...

  • Page 685: Appendix C

    41-001160-00, release 2.1, rev 04 c-1 appendix c appendix c configuring the ip phone at the asterisk ip pbx about this appendix introduction this appendix describes how to setup a user’s phone with an extension to make and receive calls using the asterisk as the pbx. Topics this appendix covers the ...

  • Page 686: Appendix C

    Ip phone at the asterisk ip pbx c-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix c ip phone at the asterisk ip pbx the following configuration illustrates how to create a user with an extension to make and receive calls using the asterisk as the pbx. This configuration is ...

  • Page 687: Appendix C

    Ip phone at the asterisk ip pbx 41-001160-00, release 2.1, rev 04 c-3 configuring the ip phone at the asterisk ip pbx appendix c ;able to use it. In this example' sip' is used. You can use ;whatever you like, but make sure they are the same, you will ;need to make an entry in your extensions.Conf fi...

  • Page 689: Appendix D

    41-001160-00, release 2.1, rev 04 d-1 appendix d appendix d sample configuration files about this appendix introduction this appendix provides sample configuration files for the 57i, 57i ct, and 53i. Topics this appendix covers the following topics: topic page sample configuration files page d-2 57i...

  • Page 690: Appendix D

    Sample configuration files d-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d sample configuration files this section consists of the sample configuration files necessary to configure the ip phones. The general format is similar to configuration files used by several unix-...

  • Page 691: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-3 sample configuration files appendix d # the aastra 57i, 57ict, and 53i phones will download 2 # configuration files from the tftp server while restarting, the # "aastra.Cfg" file and the ".Cfg" file. These two configuration # files can...

  • Page 692: Appendix D

    Sample configuration files d-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d # network settings ## = = = = = = = = # notes: if dhcp is enabled, you do not need to set these network # settings. Although depending on you dhcp server configuration you # may still have to set...

  • Page 693: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-5 sample configuration files appendix d # nat device between the server and the phone, then you must set the # following two parameters for the phone to function correctly. #sip nortel nat support: 1 # 1 = enabled #sip nortel nat timer: ...

  • Page 694: Appendix D

    Sample configuration files d-6 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d ## = = = = = = = = = = = = = = = # notes: this section defines which server the phone retrieves new # firmware images and configuration files from. Three protocols are # supported tftp, ftp and h...

  • Page 695: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-7 sample configuration files appendix d # # (1) the entered number is an exact match in the dial plan # (2) the "#" symbol has been pressed # (3) a timeout occurs # # the dial plan is a regular expression that supports the following # sy...

  • Page 696: Appendix D

    Sample configuration files d-8 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d #sip dial plan terminator: 1 # enable sending of the "#" symbol to # to the proxy in the dial string #------------------------------------------------------------------ # general sip settings # =...

  • Page 697: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-9 sample configuration files appendix d sip screen name: joe smith # the name display on the phone's screen sip user name: 4256 # the phone number sip display name: joseph smith # the caller name sent out when making # a call. Sip vmail:...

  • Page 698: Appendix D

    Sample configuration files d-10 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d sip line3 vmail: *78 # configure line 5 (a soft key line) as an ordinary line # of a test server sip line5 screen name: test 1 sip line5 user name: 5551001 sip line5 display name: test 1 sip lin...

  • Page 699: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-11 sample configuration files appendix d # with it as seen here in the default softkey settings. # softkey types: "line", "speeddial", "blf", "list", "dnd" # softkey label: alpha numeric name for the softkey. The maximum # number of char...

  • Page 700: Appendix D

    Sample configuration files d-12 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d softkey8 line: 1 # list softkey11 type: list softkey12 type: list 57i ct sample configuration file # sample configuration file # ========================= # date: october 26th, 2005 # phone mode...

  • Page 701: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-13 sample configuration files appendix d # "aastra.Cfg" file and the ".Cfg" file. These two configuration # files can be used to configure all of the settings of the phone with # the exception of assigning a static ip address to a phone ...

  • Page 702: Appendix D

    Sample configuration files d-14 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d # network settings # ================ # notes: if dhcp is enabled, you do not need to set these network # settings. Although depending on you dhcp server configuration you # may still have to se...

  • Page 703: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-15 sample configuration files appendix d #ip: # this value is unique to each phone on a server # and should be set in the ".Cfg" file if # setting this manually. #subnet mask: #default gateway: #dns1: #dns2: # time server settings # ====...

  • Page 704: Appendix D

    Sample configuration files d-16 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d #sip nortel nat timer: 60 # seconds between keep alive messages # option 2: # # if you are using a session border controller, you should set the # outbound proxy to the session border controller...

  • Page 705: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-17 sample configuration files appendix d # notes: this section defines which server the phone retrieves new # firmware images and configuration files from. Three protocols are # supported tftp, ftp and http download protocol: tftp # vali...

  • Page 706: Appendix D

    Sample configuration files d-18 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d # as you dial a number on the phone, the phone will initiate a call # when one of the following conditions are meet: # # (1) the entered number is an exact match in the dial plan # (2) the "#" s...

  • Page 707: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-19 sample configuration files appendix d # with a 0 or 1, any 5 digit number # beginning with a number between 2 and 8 # (inclusive) or a 12 digit number # beginning with 91 #sip dial plan terminator: 1 # enable sending of the "#" symbol...

  • Page 708: Appendix D

    Sample configuration files d-20 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d # l1 to l4 on the 57i and 57ict # l1 to l3 on the 53i # # these can be over-ridden on a per-line basis using the per-line # settings. # # see the admin guide for a detailed explaination of how t...

  • Page 709: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-21 sample configuration files appendix d # configure line 3 as the support broadsoft sca line # - the proxy and registrar settings are taken from the global # settings above sip line3 screen name: support sip line3 user name: 4000 sip li...

  • Page 710: Appendix D

    Sample configuration files d-22 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d # softkeys can be set either server wide or unique to each phone. # setting softkeys as line/call appearances should be done in the # ".Cfg" file, since these are unique to each phone. # notes: ...

  • Page 711: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-23 sample configuration files appendix d softkey2 type: speeddial softkey2 label: "call return" softkey2 value: *69 # dnd key softkey4 type: dnd softkey4 label: dnd # line appearance softkey6 type: line softkey6 label: test 1 softkey6 li...

  • Page 712: Appendix D

    Sample configuration files d-24 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d # aastra.Cfg or the .Cfg files. # # the feature keys are displayed when the user presses the f button # on the cordless phone's hand set. If any changes to the features # keys are made using the...

  • Page 713: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-25 sample configuration files appendix d feature key 0 gr label: "gr-line 1" # german label for the key. Displayed when the phone's language # is set to use german feature key 0 it label: "it-line 1" # italian label for the key. Displaye...

  • Page 714: Appendix D

    Sample configuration files d-26 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d # 58 - menu (options) # 59 - feature key # 60 - redial # 61 - directory # 62 - callers' list # 63 - services # 86 - icom #feature key 0 base event: 1 # indicates a corresponding action to perfor...

  • Page 715: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-27 sample configuration files appendix d feature key 0 hs event: 7 feature key 0 base event: 1 feature key 1 en label: "conf." feature key 1 fr label: "fr-conf." feature key 1 sp label: "sp-conf." feature key 1 control: 1 feature key 1 h...

  • Page 716: Appendix D

    Sample configuration files d-28 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d feature key 5 hs event: 62 feature key 5 control: 1 feature key 5 base event: 13 feature key 6 en label: "top" feature key 6 fr label: "fr-top" feature key 6 sp label: "sp-top" feature key 6 hs ...

  • Page 717: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-29 sample configuration files appendix d 53i sample configuration file # sample configuration file #= = = = = = = = = = = = = = = = = = = = = # date: october 26th, 2005 # phone model: 53i # notes: # # the general format used here is simi...

  • Page 718: Appendix D

    Sample configuration files d-30 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d # the "aastra.Cfg" file configures the settings server wide, while # the ".Cfg" file configures only the phone with the mac # address for which the file is named (for example, # "00085d0304f4.Cf...

  • Page 719: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-31 sample configuration files appendix d #ip: # this value is unique to each phone on a server # and should be set in the ".Cfg" file if # setting this manually. #subnet mask: #default gateway: #dns1: #dns2: # time server settings # ====...

  • Page 720: Appendix D

    Sample configuration files d-32 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d #sip nortel nat timer: 60 # seconds between keep alive messages.

  • Page 721: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-33 sample configuration files appendix d # option 2: # # if you are using a session border controller, you should set the # outbound proxy to the session border controller address #sip outbound proxy: sbc.Aastra.Com #sip outbound proxy p...

  • Page 722: Appendix D

    Sample configuration files d-34 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d.

  • Page 723: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-35 sample configuration files appendix d ## tftp server settings tftp server: 192.168.0.130 #alternate tftp server: #use alternate tftp server: 1 # if your dhcp server assigns # a tftp server address which # you do not use, you can use #...

  • Page 724: Appendix D

    Sample configuration files d-36 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d #.

  • Page 725: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-37 sample configuration files appendix d # 0,1,2,3,4,5,6,7,8,9,*,# : matches the keypad symbols # x : matches any digit (0...9) # + : matches 0 or more repetitions of the # : previous expression # [] : matches any number inside the brack...

  • Page 726: Appendix D

    Sample configuration files d-38 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d # general sip settings # ====================== #sip session timer: 30 # enable support of rfc4028, the default # value of 0 disables this functionality #sip transport protocol: 0 # use udp (1),...

  • Page 727: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-39 sample configuration files appendix d sip auth name: jsmith # account used to authenticate user sip password: 12345 # password for authentication account sip mode: 0 # line type: # 0 - generic, # 1 - broadsoft sca line # 2 - nortel li...

  • Page 728: Appendix D

    Sample configuration files d-40 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix d sip line5 screen name: test 1 sip line5 user name: 5551001 sip line5 display name: test 1 sip line5 auth name: 5551001 sip line5 password: 5551001 sip line5 mode: 0 sip line5 proxy ip: 10.50.10....

  • Page 729: Appendix D

    Sample configuration files 41-001160-00, release 2.1, rev 04 d-41 sample configuration files appendix d # prgkey value: if prgkey type is a speeddial, any dtmfs (from # 0 - 9, *, "#") or a comma (,) for 500ms pause and # 'e' for on-hook can be set for the value. # if prgkey type is blf it is the ext...

  • Page 731: Appendix E

    41-001160-00, release 2.1, rev 04 e-1 appendix e appendix e sample blf softkey settings about this appendix introduction this appendix provides sample blf softkey settings for both the asterisk server and the broadsoft broadworks server. Topics this appendix covers the following topics: topic page s...

  • Page 732: Appendix E

    Sample blf softkey settings e-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix e sample blf softkey settings asterisk blf the following are sample softkey and programmable key configurations to enable asterisk blf support on aastra ip phones. 57i and 57i ct configuration par...

  • Page 733: Appendix E

    Sample blf softkey settings 41-001160-00, release 2.1, rev 04 e-3 sample blf softkey settings appendix e broadsoft broadworks blf the following are sample softkey and programmable key configurations to enable broadsoft broadworks busy lamp field support on aastra ip phones. 57i and 57i ct configurat...

  • Page 735: Appendix F

    41-001160-00, release 2.1, rev 04 f-1 appendix f appendix f sample multiple proxy server configuration about this appendix introduction this appendix provides a sample multiple proxy server configuration. Topics this appendix covers the following topics: topic page multiple proxy server configuratio...

  • Page 736: Appendix F

    Multiple proxy server configuration f-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix f multiple proxy server configuration multiple proxy servers can be configured in the aastra.Cfg file or the .Cfg file. In the example below, the default proxy setting is used if no specif...

  • Page 737: Appendix F

    Multiple proxy server configuration 41-001160-00, release 2.1, rev 04 f-3 sample multiple proxy server configuration appendix f continued..... #line 2 sip line2 auth name: sip line2 password: sip line2 mode: 0 sip line2 user name: sip line2 display name: sip line2 screen name: #line 3 sip line3 auth...

  • Page 739: Appendix G

    41-001160-00, release 2.1, rev 04 g-1 appendix g appendix g creating an xml application about this appendix introduction this appendix provides information required to create an xml application for use on the ip phones. Topics this appendix covers the following topics: topic page how to create an xm...

  • Page 740: Appendix G

    About this appendix g-2 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g attributes/options to use with xml objects page g-40 http post page g-62 xml schema file page g-65 topic page.

  • Page 741: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-3 creating an xml application appendix g how to create an xml application overview this appendix describes how to create an xml application for your ip phones. Sections in this appendix include: • xml format • creating xml objects ...

  • Page 742: Appendix G

    How to create an xml application g-4 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g creating xml objects this section describes how to create xml objects. The ip phone xml api supports the following proprietary objects that allow for the customization of the ip phone’s dis...

  • Page 743: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-5 creating an xml application appendix g creating custom softkeys developers can link arbitrary uris to softkeys in the xml screens and can invoke softkey behavior to each xml screen type (text menu, text screen, user input, direct...

  • Page 744: Appendix G

    How to create an xml application g-6 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g text menu object (menu screens) the text menu object allows application developers to create a numerical list of menu items on the ip phones. The go-to line support, arrow indicator, and sc...

  • Page 745: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-7 creating an xml application appendix g xml example: traffic reports rss_to_xml.Pl employee list employees.Xml weather http://10.50.10.52/weather.Pl xml screen example: note: the maximum number of items to be included in a text me...

  • Page 746: Appendix G

    How to create an xml application g-8 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g turning off automatic numbering of menu items when implementing the aastraipphonetextmenu object, you can turn off automatic numbering of the items in a list using the style=”none" attribut...

  • Page 747: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-9 creating an xml application appendix g xml screen example: the following example shows the items in the text menu without the item numbering. Phone services traffic reports employee list weather select done.

  • Page 748: Appendix G

    How to create an xml application g-10 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g using bullets in menu items when implementing the aastraipphonetextmenu object, you can use bullets to list items using the style=”bullet" attribute. Xml description: you use this attribut...

  • Page 749: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-11 creating an xml application appendix g xml screen example: the following example shows the items in the text menu without the item numbering. Phone services select done traffic reports employee list weather.

  • Page 750: Appendix G

    How to create an xml application g-12 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g text screen object (text screens) you use the aastraipphonetextscreen object to display text to the lcd screen on the ip phone. The screen text wraps appropriately and can scroll to displa...

  • Page 751: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-13 creating an xml application appendix g xml example 1: destroyonexit = "yes"> the screen object can be implemented similar to the firmware info screen. Note that white space is preserved in xml so the display should word-wrap app...

  • Page 752: Appendix G

    How to create an xml application g-14 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g xml example 2: doneaction=”http://10.50.10.117/ test.Xml”> for more information about this test, press done. Xml screen example 2: note: this example displays text that you can scroll thro...

  • Page 753: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-15 creating an xml application appendix g xml support for answer and ignore softkeys when the ip phone receives an xml application (either via a post or an incoming action uri) while a call is coming into the phone, the user can ei...

  • Page 754: Appendix G

    How to create an xml application g-16 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g xml example: answer softkey:answer answer softkey:ignore xml screen example: for 53i: • an line displays on the lcd when the phone receives an incoming call at the same time it receives an...

  • Page 755: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-17 creating an xml application appendix g implementation (53i) xml example: allowanswer = "yes"> the screen object can be implemented similar to the firmware info screen. Note that white space is preserved in xml so the display sho...

  • Page 756: Appendix G

    How to create an xml application g-18 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g • the second block displays below the first block. By default, the second text block displays as scrolling text. This block takes up as many lines as the xml developer specifies, up to the...

  • Page 757: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-19 creating an xml application appendix g xml example: the following is an example of using the aastraipphoneformattedtextscreen object with a static line at the top and bottom blocks and 2 scrolling lines in the middle block. A li...

  • Page 758: Appendix G

    How to create an xml application g-20 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g ip phone 53i note: you can view all 5 lines at once on the 55i, 57i and 57i ct ip phones. You can view only 2 lines at a time (up to 5 lines) on the 53i ip phone. A line of static text thi...

  • Page 759: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-21 creating an xml application appendix g userinput object (user input screens) the aastraipphoneinputscreen object allows application developers to create screens for which the user can input text where applicable. (line 1 is a ti...

  • Page 760: Appendix G

    How to create an xml application g-22 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g xml description: "yes/no" destroyonexit = "yes/no"> title string, usually same as menu title "yes/no" destroyonexit = "yes/no"> enter ip address or host name target receiving the input par...

  • Page 761: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-23 creating an xml application appendix g xml example: server ip: http://10.50.10.53/script.Pl proxy xml screen example: proxy server backspace done server ip: dot cancel.

  • Page 762: Appendix G

    How to create an xml application g-24 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g implementation (number) the following is how you would implement the userinput object using numbers. Softkeys: • 1=backspace, • 5=cancel, • 6=done xml example: port: http://10.50.10.53/scr...

  • Page 763: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-25 creating an xml application appendix g implementation (string) the following is how you would implement the userinput object using strings in xml. Softkeys: • 1=backspace, • 2=dot, • 3=tri-mode key, • 4=nextspace, • 5=cancel, • ...

  • Page 764: Appendix G

    How to create an xml application g-26 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g xml softkey for special characters (user input screens for 55i, 57i, and 57i ct only) in release 2.1, the ip phone can dynamically receive a symbol list when it receives the aastraipphonei...

  • Page 765: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-27 creating an xml application appendix g implementation softkeys: • 1 = xml softkey example: symbols softkey:symbollist="@#=&" xml object and softkey example: symbols softkey:symbollist="@" backspace softkey:exit dot softkey:exit ...

  • Page 766: Appendix G

    How to create an xml application g-28 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g time and date formats (user input screens) the aastraipphoneinputscreen object allows you to specify us ( (hh:mm:ss am/pm and mm/dd/yyyy) or international (hh:mm:ss and dd/mm/yyyy) time/da...

  • Page 767: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-29 creating an xml application appendix g ip phones 55i, 57i/57i ct ip phone 53i international time enter current time: time 14:23:22 ip phones 55i, 57i/57i ct ip phone 53i note: if you don’t specify a time, the xml script uses the...

  • Page 768: Appendix G

    How to create an xml application g-30 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g united states date enter birthday: date 12/22/1980 ip phones 55i, 57i/57i ct ip phone 53i international date enter birthday: date ip phones 55i, 57i/57i ct ip phone 53i us date done enter ...

  • Page 769: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-31 creating an xml application appendix g multiple input fields (user input screens) you can have multiple input fields per aastraipphoneinputscreen object.The following specifications apply to this feature: • multiple input fields...

  • Page 770: Appendix G

    How to create an xml application g-32 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g you use the following attributes to create multiple input fields using the aastraipphoneinputscreen object. Example the following is an example aastraipphoneinputscreen script using the mu...

  • Page 771: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-33 creating an xml application appendix g time: time 10:50:24am date: date 01/24/07 datedone softkey:submit posting the above aastraipphoneinputscreen xml script displays the following screens on the ip phone. Screen 1 note: notice...

  • Page 772: Appendix G

    How to create an xml application g-34 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g scolling down changes to the next input field. Screen 2 note: notice that the softkeys change to reflect the new input type, timeus. Scrolling down again goes to the next page of inputs. S...

  • Page 773: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-35 creating an xml application appendix g condensed mode screen if you use the attribute “displaymode = “condensed” in the root tag (screen 4), the display changes to have prompt and inputs on the same line. The behavior of the scr...

  • Page 774: Appendix G

    How to create an xml application g-36 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g directory object (directory list screen) (57i only) the directory object allows you to browse an online directory in real time. It displays an automatically numbered list of contacts. By s...

  • Page 775: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-37 creating an xml application appendix g xml example: 57i - john doe 1 10.50.10.49 53i - john doe 2 4326 57i ct - john doe 3 9982691234 xml screen example:: note: the maximum number of items to be included in a directory object is...

  • Page 776: Appendix G

    How to create an xml application g-38 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g status message object (idle screen) the ip phones support an xml aastraipphonestatus object for displaying status messages on a single designated line on the phone’s idle screen. The messa...

  • Page 777: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-39 creating an xml application appendix g xml examples example 1: the following is an example of using the aastraipphonestatus object: abc12345 server side call forwarding disabled in this example, the aastraipphonestatus object se...

  • Page 778: Appendix G

    How to create an xml application g-40 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g execute commands object (for executing xml commands) an aastraipphoneexecute object on the ip phones allows the phone to execute commands using xml. The phones support the following execut...

  • Page 779: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-41 creating an xml application appendix g using the reset command the tag can be entered with the command the phone should execute. Upon receiving an aastraipphoneexecute object, the phone begins executing the url or uri specified....

  • Page 780: Appendix G

    How to create an xml application g-42 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g using the fastreboot command using an xml post, the fastreboot feature forces a phone to reboot in the idle state. It does not check for new firmware and only downloads language packs if t...

  • Page 781: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-43 creating an xml application appendix g the command for led control is sent using the xml http post from one of the xml push server lists. The following example shows an xml led command in an aastraipphoneexecute script. Notes: 1...

  • Page 782: Appendix G

    How to create an xml application g-44 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g dynamic configuration object (to push a configuration to the phone) the ip phones provide an xml feature that allows you to make configuration changes to the phone that take affect immedia...

  • Page 783: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-45 creating an xml application appendix g xml example: the following is an example of an xml configuration script that creates a softkey you can press on the ip phone to push the configuration from the server to the phone: softkey1...

  • Page 784: Appendix G

    How to create an xml application g-46 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g dynamic configuration parameters the following table identifies which configuration parameters change dynamically when using xml configuration scripts to push the configuration to the phon...

  • Page 785: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-47 creating an xml application appendix g *changes to subscriptions (blf or bla) require a reboot. **this parameter is dynamic so a user can’t access it or add to it. However, you need to reboot the phone to clear the list. *** you...

  • Page 786: Appendix G

    How to create an xml application g-48 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g xml image objects (55i, 57i/57i ct only) the 55i and 57i/57i ct ip phones provide an xml feature that allows you to load images in xml applications that display to the lcd screen. The foll...

  • Page 787: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-49 creating an xml application appendix g you can include images with an xml object in two ways: • using pixel data stored with specified tags • using an internal bitmap loaded via a specified uri the following paragraphs describe ...

  • Page 788: Appendix G

    How to create an xml application g-50 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g xml example: the xml script for the aastraipphoneimagescreen object is as follows: horizontalalign = "left,middle,right,'pixel'" height="'integer'", width="'integer'"> ff00f800ff00ffffffff...

  • Page 789: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-51 creating an xml application appendix g aastraipphoneimagemenu the aastraipphoneimagemenu object allows you to use a bitmap image to display as a menu. Each menu item is linked to a keypad key (0-9, *, #). You can use this type o...

  • Page 790: Appendix G

    How to create an xml application g-52 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g each uri is appended to the “base” uri if one exists. The default softkey is a “done” key at the bottom right position. It is a parse error if two uris specify the same index. Xml screen e...

  • Page 791: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-53 creating an xml application appendix g aastraipphonetextmenu (icon menu) the aastraipphonetextmenu (icon menu) object is identical to the “text menu object (menu screens)” described on page g-6 , except a small icon image appear...

  • Page 792: Appendix G

    How to create an xml application g-54 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g xml screen example: using the you can incorporate the use of an attribute in the xml script to define the images you will use with the aastraipphonetextmenu object. After you define the ic...

  • Page 793: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-55 creating an xml application appendix g you can use one or both ways to load images within the same xml script. The softkey icons display at the edge of the screen. Any xml object that supports softkeys can support the optional t...

  • Page 794: Appendix G

    How to create an xml application g-56 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g xml screen example: ip phone internal icon images the ip phones have internal icon images you can use when specifying the “icon:” attribute in the . The following table lists the internal ...

  • Page 795: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-57 creating an xml application appendix g arrowup arrowdown arrowsupanddown filledcircle emptycircle envelope prohibit square ellipse tailarrowup tailarrowdown uri name displays this:.

  • Page 796: Appendix G

    How to create an xml application g-58 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g attributes/options to use with xml objects beep attribute (configurable via xml objects, config files, or aastra web ui) you can enable or disable a “beep”option to indicate a status on th...

  • Page 797: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-59 creating an xml application appendix g timeout attribute (configurable via xml objects only) the xml “timeout” attribute allows you to specify a timeout value for the lcd screen display. You must use the “timeout” aattribute in ...

  • Page 798: Appendix G

    How to create an xml application g-60 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g lockin attribute (configurable via xml objects only) the xml “lockin” attribute allows you to specify whether or not the information on the lcd screen stays displayed when other events occ...

  • Page 799: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-61 creating an xml application appendix g cancelaction attribute (configurable via xml objects only) the xml “cancelaction” attribute allows you to specify a uri that a get is executed on when the user presses the default cancel ke...

  • Page 800: Appendix G

    How to create an xml application g-62 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g http post in addition to initiating a request to an xml application from the services menu, an http server can push an xml object to the phone via http post. The phone parses this object i...

  • Page 801: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-63 creating an xml application appendix g example 2: below is a sample php source code which sends an xml object to an aastra phone. # function push2phone($server,$phone,$data) { # url-encode the xml object $xml = "xml=".Urlencode(...

  • Page 802: Appendix G

    How to create an xml application g-64 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g http refresh header you can use an http refresh header with the xml screen objects on the ip phones. This feature provides the following: • all current xml screen objects have the ability ...

  • Page 803: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-65 creating an xml application appendix g http language header you can use an http language header with the xml screen objects on the ip phones. By including the language information in the http header, the http get includes the ph...

  • Page 804: Appendix G

    How to create an xml application g-66 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g.

  • Page 805: Appendix G

    How to create an xml application 41-001160-00, release 2.1, rev 04 g-67 creating an xml application appendix g.

  • Page 806: Appendix G

    How to create an xml application g-68 41-001160-00, release 2.1, rev 04 ip phone administrator guide appendix g.

  • Page 807: Limited W

    41-001160-00, release 2.1, rev 04 -1 limited w arranty limited warranty aastra telecom warrants this product against defects and malfunctions during a one (1) year period from the date of original purchase. If there is a defect or malfunction, aastra telecom shall, at its option, and as the exclusiv...

  • Page 808: Limited W

    -2 41-001160-00, release 2.1, rev 04 ip phone administrator guide limited w arranty warranty repair services should the set fail during the warranty period: in north america, please call 1-800-574-1611 for further information. Outside north america, contact your sales representative for return instr...

  • Page 809: Index

    41-001160-00, release 2.1, rev 04 index-1 index a aastra web ui advanced settings description 2-13 basic settings description 2-12 enabling and disabling 2-14 operation description 2-10 status description 2-10 acd subscription period 5-133 action uris 3-58 , 5-209 action uris, configuring 5-211 admi...

  • Page 810: Index

    Index-2 41-001160-00, release 2.1, rev 04 index call waiting 5-43 call waiting tone 5-44 call waiting tones 5-78 callers list downloading to phone 5-178 enabling/disabling 5-176 overview 5-174 using on phone 5-176 callers list key 1-10 , 1-15 callers list key 5-101 , 5-108 cancelaction, for xml appl...

  • Page 811: Index

    41-001160-00, release 2.1, rev 04 index-3 index displaying 5-41 dtmf methods 4-68 dtmf playback, configuring suppression for 5-39 dtmf, out-of-band 4-67 dtmf, suppressing playback 5-39 e emergency dial plan, defining 5-15 empty key 5-102 encryption methods for 7-2 overview 7-2 procedure for 7-3 expa...

  • Page 812: Index

    Index-4 41-001160-00, release 2.1, rev 04 index language overview 5-21 specifying on ip phone 5-24 webpage language 3-30 language pack settings 1-110 language settings 1-109 last call return (lcr) configuring 5-164 how it works 5-164 lcr key 5-100 line key 5-98 , 5-108 line settings 3-56 lockin, for...

  • Page 813: Index

    41-001160-00, release 2.1, rev 04 index-5 index auto-answer settings 1-121 blacklist duration 1-175 blf subscription period 1-68 blind transfer setting 1-172 boot sequence recover mode 1-173 call forward settings 1-87 call waiting settings 1-101 callers list settings 1-86 centralized conferencing 1-...

  • Page 814: Index

    Index-6 41-001160-00, release 2.1, rev 04 index internal 3-27 priority 3-27 programmable key settings 53i, 55i 1-145 programmable keys 5-93 configuring 5-103 public key 5-110 q qos 4-31 r redial key enabling/disabling 5-66 mapping as speeddial 5-67 repair 0-2 requirements, ip phone 1-19 restarting i...

  • Page 815: Index

    41-001160-00, release 2.1, rev 04 index-7 index backup proxy port 3-46 backup proxy server 3-46 backup registrar port 3-48 backup registrar server 3-48 outbound proxy port 3-47 outbound proxy server 3-47 proxy port 3-46 proxy server 3-46 registrar port 3-47 registrar server 3-47 registration period ...

  • Page 816: Index

    Index-8 41-001160-00, release 2.1, rev 04 index w warranty 0-1 warranty exclusions 0-1 whilte list proxy 6-19 x xfer key 5-101 , 5-109 xfer key, enabling/disabling 5-66 xml configuring 5-203 configuring on ip phone 5-202 customized services 5-196 overview 5-196 push requests 5-203 using on phone 5-2...

  • Page 818

    Sip ip phone administrator guide models 53i, 55i, 57i, and 57i ct © 2007 aastra telecom inc. If you’ve read this owner’s manual and consulted the troubleshooting section and still have problems, please visit our website at www.Aastratelecom.Com or call 1-800-574-1611 for technical assistance. 41-001...