1. DL manuals
  2. Aastra
  3. Telephone
  4. BE-100HT
  5. Owner's Manual

Aastra BE-100HT Owner's Manual - Table Of Contents

Manual is about: Aastra Telecom Corded Headset User Manual

Summary of BE-100HT

  • Page 1

    - 1 - model be model be model be model be----100ht 100ht 100ht 100ht headset telephone headset telephone headset telephone headset telephone owner’s manual owner’s manual owner’s manual owner’s manual please read this instruction manual carefully..

  • Page 2

    - 2 -.

  • Page 3: Table Of Contents

    - 3 - introduction -------------------------------------------------------------------4 features and controls -----------------------------------------------------5 installation ---------------------------------------------------------------------7 installing your headset telephone -----------------...

  • Page 4: Introduction

    - 4 - thank you for purchasing the model be-100ht headset telephone. The be-100ht is a full featured compact telephone, designed to provide hands-free operation using a comfortable lightweight headset. You will experience a greater level of comfort and convenience with the be-100ht headset telephone...

  • Page 5: Features And Controls

    - 5 - features and controls 1. Telephone line jack connects incoming telephone line plug from telephone wall jack. 2. Ringer hl/low switch the hi/low switch adjusts the sound level of the ringer. 3. Tone/pulse switch selects either tone or pulse dialing. 4. In-use led the in-use led indicates when p...

  • Page 6

    - 6 - an optional belt clip is supplied with your be-100ht headset telephone. It can be easily installed or removed as required. See figure 2 1. Insert the belt clip mounting tabs into the corresponding mounting holes located on the rear surface of the be-100ht. 2. Confirm the belt clip mounting tab...

  • Page 7: Installation

    - 7 - installing your headset telephone the be-100ht is a complete telephone and can be used in the same manner as any single line telephone. See figure 3 1. Insert the plug from the headset cord into the modular jack marked headset on the left side of the be-100ht. 2. Plug one end of the supplied t...

  • Page 8: Operation

    - 8 - using the headset the be-100ht is supplied with a high quality microphone to provide clear voice communications. The boom microphone can be swiveled to position so the headset can be used on either ear. See figure 4 operation 1. Place the headband over your head with the speaker on the ear of ...

  • Page 9: Operation - Continued

    - 9 - 6. Always leave enough slack in the cord so that you can move your head freely. Making outgoing calls 1. Put on the headset and adjust it for your comfort. 2. Adjust boom microphone so that it is about the width of two fingers from your mouth. 3. Push the talk button (7), you will hear a dial ...

  • Page 10: Operation - Continued

    - 10 - 3. When you hear an incoming call ringing, push the be-100ht talk button (7). The be-100ht telephone will answer the call and the in use led will light. 4. Begin speaking normally into the microphone. 5. After completing your conversation, push the talk button (7) to hang up and disconnect th...

  • Page 11: Operation - Continued

    - 11 - 1. The redial function will dial numbers up to a maximum of 32 digits. Flash button the flash button (9) when pressed will create a quick break on the telephone line. 1. The flash button can be used if you have call waiting service to switch between calls (consult your local telephone company...

  • Page 12: Care And Maintenance

    - 12 - your be-100ht telephone has been designed to provide years of trouble free service. It is a sensitive electro-mechanical instrument. To assure its longevity, please read the following maintenance instructions. • keep the be-100ht telephone away from heat as high temperatures can shorten the l...

  • Page 13: Fcc Information

    - 13 - this equipment complies with part 68 of the fcc rules. On the bottom or back of this equipment is a label that contains, among other information, the fcc registration number and ringer equivalence number (ren) for this equipment. Upon request, you must provide this information to your telepho...

  • Page 14

    - 14 - when using your telephone, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and/or injury to persons including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Do not use l...