Module complémentaire m622 directives d’installation m622 add-on module installation instructions.
The m622 add-on module can be attached to the m6310 or m6320 meridian ® business set to provide extra feature/line keys. When one m622 is connected, 22 additional feature/line keys are available to the meridian ® business set. If required, you can also connect another m622 add-on module to increase ...
Before you start... Ensure that you have the following items before you start the m622 installation: • one m622 add-on module (two if connecting two m622 modules) • an extended wedge-shaped base to join the m6310/m6320 to the m622 (use part p08360xx to join one m622 module to the m6310/m6320; use pa...
Remove the existing telephone base 1. Turn the telephone set upside down on a soft surface, as shown in figure 1. If the line cord is plugged into the line receptacle (a), disconnect it from the tele- phone set and set it aside. 2. Locate the two screws (b) (if installed) in the wedge-shaped base. R...
4 1 a b b.
Connect the m622 to the telephone set 4. Place the m622 (1) upside down and to the left of the telephone set as shown in figure 2. If you are installing a second m622 (2), place it to the left of the first m622 (1). 5. Insert one end of the long ribbon cable (320mm) into receptacle c as shown in fig...
6 2 d c h f h e d c 3.
6. Insert the other end of the long ribbon cable into receptacle d as shown in figure 2. Slide the rib- bon cable underneath the restraining tabs h so that it is not twisted and so that the ribbon cable avoids the screw mount. This placement ensures that the cable will not be pinched or squeezed onc...
8 4 b b b m6320 m622.
Attached the extended base 8. Reinsert the line cord into the proper receptacle (a) as shown in figure 1. Thread the card through the channel provided in the extended base so that the cord emerges from the back of the telephone set. Fixation du support large 8. Rebrancher le cordon de raccordement d...
9. If you are connecting one m622 add-on module, position the wedge-shaped base as shown in figure 4. If you are connecting two m622 add-on modules, posi- tion the base as shown in figure 5. Align the plastic tabs in the base with the notches provided on the m622 and telephone set. 10. Press the bas...
© aastra technologies 2005. 41-0054-00 rev. 01 meridian ® is a trademark of nortel networks, used under license by aastra technologies limited. Meridian ® est une marque déposée de nortel networks, utilisée sous licence par aastra technologies limited..
