Aastra Vista 9009S User Manual - Memory Keys
8
Vista User Guide
Long distance calls
Memory keys
Your Vista 9009S has 4 memory keys, each having 2 slots.
Saving a number in the memory
Press
ß
and follow the instructions shown on the display or read through the
following example on how to save a name and number to memory.
Press
˙
when entering numbers to place a pause into a memory key (if required).
This is useful if you wish to preprogram access to a remote system, such as Voice Mail,
because a pause is often required before entering a system password. A Link may also be
programmed into a memory key if required.
Note:
Memory keys will not function during a power failure.
Dialing a long distance number from the Callers List:
When a name/number is displayed in the Callers List.
1.
Enter
⁄
and the appropriate area code (if required).
2.
Press
{
.The number on the display will be automatically dialed.
Note:
If you make an error while entering either the 1 or area code, press
l
l
l
l
or
k
k
k
k
to
correct.
Saving a number in the upper memory:
For example, to save Len’s number (555-1440)
1.
Press
ß
.
2.
For upper memory positions press
}
and then the memory key where you
want to store the number. For lower memory positions, press the memory key where
you want to store the number.
3.
Press
fififi⁄››‚
on the dial pad.
4.
Press
ß
.
5.
Press
ß
again to quit
OR enter Len’s name by pressing the following keys:
fi
three times then
l
l
l
l
‹
twice then
l
l
l
l
fl
twice.
Note:
The Letter Chart lists the keys for specific letters and numbers (see page 9).
6.
Press
ß
to store the name.
7.
Write the name on the memory card or receiver card (in pencil).
Note:
Press
l
l
l
l
to move to the next letter in a name. To erase a letter, simply press
k
k
k
k
.
Press
l
l
l
l
twice to add a space.