AAT KZC-800-H Installation manual - page 7
Integrated Access Controller – Installation manual
All rights reserved. © AAT HOLDING S.A.
7
3. Manager Card operation
3.1 Add user card(s)
Cards can be added continuously.
3.2 Delete user card(s)
Cards can be deleted continuously.
4. User Operation
4.1 To unlock the lock by one card
4.2 To unlock the lock for card and PIN users
4.3 To unlock the lock for card or PIN users
4.4 To unlock the lock for multi cards
Time interval can not exceed 5s. Precondition: Set the door entry by card only,
and set “2-10” for opening the door by multi cards.
4.5 Toggle Mode
In normal mode, every time a valid card/tag read or PIN input, the relay will op-
erate, for the pre-set relay pulse time.
In Toggle mode, every time a valid card/tag read or PIN input, the relay changes
state, which will not turn back until read card/tag or input PIN again.
Read manager add card
Read User card
Read manager add card
Read manager delete card Read User card Read manager delete card
Read valid card once
Lock will be unlocked
Read valid card once
Input 4-6 digits PIN #
Lock will be unlocked
Read valid card once, or
Input 4-6 digits PIN #
Lock will be unlocked
Read 2-10 valid card
Lock will be unlocked