1. DL manuals
  2. AAT
  3. Wheelchair
  4. Movilino
  5. User Manual

AAT Movilino User Manual

Manual is about: Pushing and braking aid

Summary of Movilino

  • Page 1

    Translation of the original user's manual pushing and braking aid movilino gb.

  • Page 2: Movilino

    Ce-declaration of conformity the company aat alber antriebstechnik gmbh herewith declares that the products of the pushing and braking aid movilino were developed and manu- factured in concordance with the regulations of the european union, eec guidelines 2007/47/eg and 2006/42/eg. This declaration ...

  • Page 3: Movilino

    3 movilino table of contents ce declaration of conformity. . . . . . . . . . . . . . . . . 2 table of contents . . . . . . . . . . . . . . . . . . . . . . 3 1 general information . . . . . . . . . . . . . . . . . . . . . 5 1.1 how to use this user's manual . . . . . . . . . . . 5 1.2 instruction . ....

  • Page 4: Movilino

    6 control and display elements . . . . . . . . . . . . . . . . 25 6.1 control unit . . . . . . . . . . . . . . . . . . . . 25 6.2 charge of battery. . . . . . . . . . . . . . . . . . 26 6.3 control light to indicate malfunction . . . . . . . . 27 6.4 trouble shooting . . . . . . . . . . . . . . . . ...

  • Page 5: Movilino

    1 general information congratulations! The movilino is a pushing and braking aid operated by an assistant. Special brackets make it possible to mount the movilino easily to almost any type of wheelchair. Movilino supports the assistant in pushing and braking a wheelchair. It faci- litates driving on...

  • Page 6: Movilino

    6 movilino 2 description of the product 2.1 adequate use please use the braking and pushing aid movilino exclusively for the transpor- tation of physically disabled persons. Said person should be able to sit properly without help, otherwise you should secure them with a safety belt. The latter is an...

  • Page 7: Movilino

    2.2 features of the movilino Œ = handle  = column Ž = brackets  = power unit  = battery pack 7 movilino.

  • Page 8: Movilino

    2.2.1 control unit Œ = safety chip for the engine immobiliser  = on/off switch Ž = rocker switch forward/backward  = speed control 2.2.2 overview Œ = control unit  = tightening knob for the handles' height adjustment Ž = tightening knob for the column  = light emitting diode  = drive wheels ‘ =...

  • Page 9: Movilino

    2.3 technical data * limiting values stipulated by the wheelchair manufacturers must be noted and observed. ** braking and climbing capacity depend among other things on the weight of the person to be transported as well as the ground profile, terrain, tempe- rature, etc. *** according to iso 7176-4...

  • Page 10: Movilino

    2.4 dimensioned sketch 10 movilino.

  • Page 11: Movilino

    2.5 standard scope of delivery the following is part of the standard scope of delivery: Œ = movilino power unit plus handle  = battery pack Ž = charger ...As well as the components mounted to the wheelchair, power cable and bag for the battery pack plus the user's manual (no picture). In addition, ...

  • Page 12: Movilino

    3 assembly with a few movements you can assemble the movilino by means of several fixtures and tightening knobs. Disassembly is just as easy. 3.1 handle first connect the handle with the power unit by inserting the column Œ into the holding device  on the power unit. A 9-pin sub-d socket connector ...

  • Page 13: Movilino

    Secure the connection with the tightening knob . F please always make sure that the handle is safely connected to the power unit. F please only connect the handle with the power unit, if both parts are clean and dry. Should there be dirt or moisture the two parts should never be connected. F clean ...

  • Page 14: Movilino

    3.2 brackets the movilino may only be used, if your wheelchair has been supplied with special brackets. These brackets may only be mounted by aat alber antriebstechnik or autho- rized personnel. 3.2.1 bracket on the wheelchair the wheelchair must be equipped with a bracket in order to attach the mov...

  • Page 15: Movilino

    3.2.3 insert the movilino into the lower bracket on the wheelchair 1. Please use the locking brakes of your wheelchair to avoid any move- ment of the chair while the movilino is being mounted. 2. Tilt the movilino slightly backwards. As soon as the device sits on its wheels you may push the movilino...

  • Page 16: Movilino

    3.2.5 fix the movilino to the wheelchair 1. Take one of the quick pins and with your thump push down the quick pin in the middle . 2. Put the quick pin all the way into the drilled hole of one of the upper brackets on the wheelchair ‘ and release the quick pin. 3. Now take the other quick pin and p...

  • Page 17: Movilino

    Afterwards you can insert the plug of the power cable into the socket on the battery pack. F please make sure that the power cable’s plug is dry and clean. Plug the power cable’s plug into the socket on the movilino. F please make sure that the power cable’s plug is dry and clean. If the device is a...

  • Page 18: Movilino

    3.6 anti-tilt support you may operate the movilino only with installed anti-tilt support. If your wheelchair does not have a tilt support, which is standard with most wheelchair manufacturers, we can equip your wheelchair with the necessary anti tilt support as an optional accessory of the movilino....

  • Page 19: Movilino

    Brackets movilino/s-max slide the tilt support  all the way into the holding device Œ on the movili- no. Pay attention on the label at the anti-tilt support. Lock it with the quick pin. Push the quick pin into the drilling on the holding device while you press the unlocking button Ž at the top of t...

  • Page 20: Movilino

    4 safety instructions f for a safe operation of the movilino it is important that you observe and adhere to all warning signs and instructions in this user's manu- al as well as the warning signs and instructions on the device itself. All general rules for the safe use of a wheelchair apply without ...

  • Page 21: Movilino

    Please do not drive to the edge of stairs or precipices with the movilino tur- ned on. F please do not attach anything to the movilino’s handle! Please check the anti-tilt support before each use. Please do not drive bac- kwards against a wall with mounted anti-tilt support because they could jam an...

  • Page 22: Movilino

    For safety reasons, please never leave the movilino unattended. Should this be unavoidable, please take out the safety chip for the engine immobiliser, so nobody unauthorized may use the device. Only an attendant and not the wheelchair driver him- or herself may use the pushing and braking aid, movi...

  • Page 23: Movilino

    F please be careful when going downhill with full batteries. The drive down generates electricity which charges the batteries additionally. This may lead to excess voltage which in turn may lead to a turning off of the movilino. During regular use the device reduces its speed automatically to avoid ...

  • Page 24: Movilino

    5 operation 5.1 maximum lifting capacity please make sure that the maximum lifting capacity of 170 kg (wheelchair, person and movilino) is not exceeded. 5.2 battery pack please make sure that the batteries are fully charged before you use the mo- vilino for the first time. Extensive instructions you...

  • Page 25: Movilino

    6 control and display elements before we get to the actual instructions for operation, we would like to intro- duce the movilino's most important components to you. Your movilino is ready to go when you receive it. Once the movilino is correct- ly mounted and connected, you can turn it on and use it...

  • Page 26: Movilino

    6.1.4 rocker switch with the rocker switch you determine the direction and speed (up to the pre-selected speed) of the movilino. F use the rocker switch carefully. To drive forward you press the longer back part of the rocker switch . To drive backward, please press the rocker switch’s shorter fron...

  • Page 27: Movilino

    6.3 control light to indicate malfunction malfunction is indicated by a blinking light emitting diode. If there is still an indication of malfunction, charge the batteries in case of low battery charge. For all other cases of malfunction, please contact your authorized dealer. In cases of malfunctio...

  • Page 28: Movilino

    6.5 transport for transportation you may remove the handle (see assembly chapter 3.1) and carry the climbing unit at the upper rod . F note that the device weighs 10,5 kg! F always turn off the movilino for transportation! F when transporting the movilino in a vehicle, always secure the devi- ce acc...

  • Page 29: Movilino

    7 accessories 7.1 battery pack the movilino works with batteries and is delivered with one battery pack with charging electronics. If you use the movilino often, i.E. If there are not sufficient breaks for the bat- teries to be recharged, we recommend you obtain an additional battery pack (available...

  • Page 30: Movilino

    8 care, maintenance and recycling to insure the movilino’s safe and proper functioning we recommend a safety check done on the device every two years, even though there might not be any outer damage or malfunction evident. F for safety reasons this safety check or repairs of any sort may only be per...

  • Page 31: Movilino

    8.2.2 voltage converter for your vehicle the voltage converter does not need particular care or maintenance . Never- theless, check your voltage converter regularly and protect it from oil, grease, aggressive cleaners, diluting agents and/or damage due to sharp edges, etc. F before using the voltage...

  • Page 32: Movilino

    8.3 battery pack the battery pack's sealed lead acid batteries should be recharged after each use. They are air-tight, maintenance-free, rechargeable and of excellent qua- lity. The battery pack undergoes a so-called self-discharge; therefore, you should connect your battery pack, whenever possible,...

  • Page 33: Movilino

    8.3.1 charging with the automatic charger to charge the batteries you may leave the battery pack in its bag attached to the wheelchair. First pull the plug of the power cable then insert the plug of the charger entirely into the charging socket. Finally plug the charger into the wall outlet. F since...

  • Page 34: Movilino

    8.4 fuse the battery pack has two fuses, each 40a, located in a special compartment Œ. Once the lower fuse  is burnt out, replace it by the upper, extra fuse Ž. If a change of fuses is necessary, put a pin in the opening  on the side of the battery pack. This unlocks the drawer, so you can pull it...

  • Page 35: Movilino

    9 warranty and liability 9.1 warranty aat alber antriebstechnik gmbh grants a warranty of two years for all its products of type movilino including all its accessory parts (with the excepti- on of the sealed lead acid batteries). The warranty begins at the date of pur- chase and covers failure of ma...

  • Page 36: Movilino

    Movilino aat alber antriebstechnik gmbh postfach 10 05 60 · d-72426 albstadt tel. +49.74 31.12 95-0 · fax +49.74 31.12 95-35 www.Aat-online.De · info@aat-online.De.