AAVARA PM4X4A Installation Manual - page 5
5
Chapter 2 Installation
1. Plug 5V wall-mounted power supply into the wall outlet.
2. Plug 5V power supply into the HDMI Matrix’s power DC jack.
3. Connect the HDMI cables from the HDMI video source device to the Matrix HDMI Inputs.
4. Connect the HDMI cables from your HDMI Output to all TV/Display/Projectors.
5. Select Matrix mode that fit your application/configuration and adjust Matrix mode dip switch.
Please refer Chapter 3 section for Matrix mode dip switch setting.
Made sure correct Matrix mode selected and correct dip switch setting.
6. Optional. Connect Rs-232 communication between PC/Control Panel and Matrix.
Please refer Chapter 4 section for RS-232 command list.
7. Power on the HDMI Matrix.
8. Power on your HDMI Displays.
9. Power on your HDMI Sources.