Ps128a 1080p hdmi splitter 1:8 with rs-232 control & hdmi v1.4 3d video format support installation guide www.Aavara.Com aavara innovation corp. All rights reserved rev 1.1.
2 table of contents chapter 1............................................................. 3 1.1 introduction .................................................... 3 1.2 features ......................................................... 3 1.3 technical specifications................................. ...
Chapter 1 1.1 introduction aavara® ps128a is a hdmi 1080p distribution hub that sends the same hdmi video input to eight hdmi hdtv digital screens. It support hdmi v1.4 3d video format, rs-232 control, two splitter modes. Ps128a is a flexible solution to integrate multiple displays in signage, video...
4 1.3 technical specifications model no. Ps128a hdmi source input hdmi single link, tmds x 1 hdmi display output hdmi single link, tmds x 8 interface front panel: - splitter mode dip switch: - off m1 greatest common video & audio format among all displays connected. - on m3 following output 1 displa...
5 chapter 2 2.1 installation 1. Optional. Installed 1u rack mount kit if needed. 2. Plug 5v wall-mounted power supply into the wall outlet. 3. Plug 5v power supply into the hdmi splitter’s power dc jack. 4. Connect the hdmi cable from the hdmi device into the hdmi splitter input. 5. Connect the hdmi...
6 chapter 3 3.1 troubleshooting problem solution hdmi splitter does not work 1. Make sure the 5v power is plugged in the hdmi splitter 1:8. 2. Check to see if the led light is on. No signal or poor picture 1. Make sure your video display is hdcp compliant. 2. Plug your hdmi cable to source and displ...
