1. DL manuals
  2. AAXA Technologies
  3. Projector
  4. P2-A
  5. User Manual

AAXA Technologies P2-A User Manual

Manual is about: Smart Pico Projector

Summary of P2-A

  • Page 1

    Aaxa technologies user guide.

  • Page 2: Caution!

    Caution! Warning: please use this product as instructed. Misuse may cause injury or death. Do not use while driving. Do not expose to water or wet surfaces. Electric shock may occur. Do not expose the projected led image to your eyes or the eyes of others. Do not block or restrict airflow from venti...

  • Page 3: Table of Contents

    Table of contents chapter 1: at a glance p2-a introduction remote & keypad accessories chapter 2: getting started connecting to wifi focus adjustment / throw distance external inputs/outputs navigating the main menu loading external content videos menu photos menu connecting to a digital input conne...

  • Page 4: P2-A At A Glance

    P2-a at a glance chapter 1 digital input usb port main unit front/back power button av port headphone out power port 1 focus adjustment touchpad tf card slot.

  • Page 5: Remote & Keypad

    Remote & keypad 2 note: pressing power on the remote once will only enable or disable the remote control. In order to fully turn the projector off, hold the power button down on the remote or projector for at least 3 seconds. Power on/off select source navigation volume up volume down remote back mu...

  • Page 6: Remote & Keypad Cont.

    Remote & keypad cont. The p2-a incorporates a capacitive touchpad directly onto the top of the projector. This touch- pad works in conjunction with a pointer and allows users to select icons, apks, and scroll through the menu system. Like most notebook touchpads, the touchpad can be double-tapped fo...

  • Page 7: Accessories

    Accessories 4 *under various circumstances, the actual accessories may be different from those shown in the pictures above. Additional accessories are available for purchase at www.Aaxatech.Com tripod remote power adapter a/v cable.

  • Page 8: Getting Started

    Getting started 1. Connect the power cord to the p2-a. 2. Connect the other end of the power cord into the wall power source. 3. Hold the power button for 3 seconds to start the projector. 5 powering on the projector chapter 2 powering off the projector 1. To turn off the projector, hold the power b...

  • Page 9: Connecting to Wifi

    Connecting to wifi 6 please see next page for steps to establish to a wifi connection. Connecting to wifi: • select the “settings” icon (fig. 2.1). • select the “network settings” option and navigate to your wifi network and click on it to connect. • a window will appear and ask for a password, plea...

  • Page 10: Connecting to Wifi Faq

    Connecting to wifi faq 7 connecting to wifi: p2-a features a wifi chipset capable of 802.11 b/g/n connection. This means it is compatible with most wifi routers. To connect to a wifi router, follow the following steps: step 1: access the network settings submenu: settings -> network settings step 2:...

  • Page 11: Focus Adjustment

    Focus adjustment / throw distance 8 diagonal screen size 16:9 aspect ratio throw distance unit: inches 20 30 40 50 60 70 80 90 diagonal size unit: inches 19 29 38 48 57 67 76 86 • spin the focus wheel up or down until the image becomes clear. Focus adjustment throw distance chart throw ratio 1.2 *mi...

  • Page 12: External Inputs and Outputs

    9 external inputs and outputs headphones/speakers composite cable digital input (mini) usb stick tf card.

  • Page 13: Navigating The Main Menu

    Navigating the main menu 10 main menu the main menu allows access to all the features of the p2-a. Main menu features • videos - view videos from external devices such as tf card and usb • photos - view photos from external devices such as tf card and usb • browser - brings up a browser • streaming ...

  • Page 14

    Navigating the main menu cont. 11 pop-up menu: the pop-up menu appears after turning the projector on and it can be hidden by clicking the “down” arrow at the bottom of the screen. Double tap, hold down on the touchpad, and drag up to bring up the pop-up menu. The pop-up menu allows the user to acce...

  • Page 15: Loading External Content

    11 loading external content 12 the p2-a can read files directly from both a tf card and usb drive. Supported file types include: mp3 / wma / ogg / wav avi / jpg / gif/ bmp ppt / doc / pdf / txt (up to 32 gb) (up to 32 gb).

  • Page 16

    Loading external content cont. How to insert your usb drive • slide your usb drive into the usb port. • gently slide the drive until it cannot go in any further. (up to 32 gb) *review the “specifications” section of this manual to read about the sup- ported file formats. 13.

  • Page 17

    Loading external content cont. 14 *review the “specifications” sec- tion of this manual to read about the supported file formats. (up to 32 gb) how to insert your tf card • slide in your tf card into the tf card slot on the side of the p2-a (as shown in picture). • gently slide the tf card until it ...

  • Page 18

    15 loading external content cont. Videos menu • video can be played by clicking “video” on the main menu. Photos menu • photo can be shown by clicking “photos” on the main menu. Officemenu • .Pdf, .Docx, .Xls, .Ppt, .Txt can be shown by clicking “office” on the main menu. Once your tf card or usb dr...

  • Page 19: Video Menu

    15 video menu • to view videos, access the content via the “videos” icon (fig 2.6). • all sources will be displayed. Select the source and choose the video you want to view (fig 2.7). 16 fig. 2.6 fig. 2.7.

  • Page 20: Video Submenu

    17 video submenu while playing videos while playing videos the volume is adjustable. To adjust volume, press the volume buttons on the remote or projector or access the pop-up menu and adjust through the volume icon. Further controls are available in the video player submenu - which is accessed thro...

  • Page 21: Video Submenu Cont.

    18 video submenu cont. More functions can be accessed on the bottom-right corner by clicking the 3-horizontal points. I. Delete bookmark and play from beginning ii. Delete bookmark iii. Play mode iv. External, embedded subtitles priority selection v. Embedded subtitle select vi. Audio track select v...

  • Page 22: How Do I Loop A Video?

    How do i loop a video? 19 video submenu cont. How do i turn on the subtitles (if available)? 1. On the “submenu,” click the 3-horizontal points to access more functions. 2. Select “embedded subtitle select“ if the subtitles are hardcoded into video. 3. If using a seperate subtitle file, click “exter...

  • Page 23: Photos Menu

    Photos menu • to view pictures, access the content via the “photos” icon (fig 2.3). • all albums from internal and external storage will be displayed (fig 2.4). • select the album and choose the picture you want to view (fig 2.5). 20 fig. 2.3 fig. 2.4 fig. 2.5.

  • Page 24: Photo Menu Cont.

    21 photo menu cont. • to access to the previous photo, drag the current photo to the left. • to access to the next photo, drag the current photo to the right. • double press the “ok” button or double tap the touchpad once to zoom in on the picture. Double press the “ok” button or double tap the touc...

  • Page 25: Step 1:

    Connecting to a computer via digital input 22 connect one end of the digital input adapter cable to your computer’s digital input port. Step 1: step 2: step 3: in the main menu, select the “video-in” icon. Connect the other end of the digital input adapter cable to your p2-a’s mini digital input por...

  • Page 26: Step 4:

    Connecting to a computer cont. Step 4: enabling digital video output on your computer – to enable digital video output on your computer most computers require “turning on” the video output feature. Each computer is different. Please consult your owner’s manual for instructions to enable digital vide...

  • Page 27

    Connecting to digital input video source connectivity to multimedia devices the p2-a can connect to many media devices including: ipod, iphone, ipad, dvd players, smart phones, cameras, video game consoles and other peripherals with ease. *some smartphones require video out capabilities to be displa...

  • Page 28: Step 1:

    Connecting to composite video 25 connect the 3.5mm composite a/v cable to the side of the p2-a. Connect the composite end of the av cable (red, white,yellow) to your own male av cable. Step 1: step 2:.

  • Page 29: Step 3:

    Connecting to composite video cont. *some smartphones require video out capabilities to be displayed with the p2-a. Check with your phone manufacturer for details. 26 in the main menu turn on your multimedia device. Select the “video-rca” icon step 3: step 4:.

  • Page 30: Browser

    Browser • to access the website, select “browser” from the main menu. • put the address you would like to access by using the touchpad browser 27 main menu screen.

  • Page 31: Streaming Applications

    Streaming application • to access the streaming application, select “streaming” from the main menu. • the p2-a enables video streaming from selected applications. Please visit the product website for additional information and firmware updates. Streaming applications 28 main menu screen • streaming ...

  • Page 32: Streaming Applications Cont.

    29 streaming applications cont. Troubleshooting application hangs or freezes • try clearing the cache (see settings - application manager) update required • if an update is required, you may be able to obtain it from the product website (through “browser” in the “apps”) poor video playback • possibl...

  • Page 33

    Connecting to a bluetooth device 30 please see next page for steps to connect to a bluetooth device connecting to bluetooth: • select the “settings” icon (fig. 2.8). • select the “bluetooth settings” option and navigate to your bluetooth device and click on it to connect (fig. 2.9). • the projector ...

  • Page 34: Bluetooth Speaker

    Bluetooth speaker 31 to connect a bluetooth speaker step 1: access the bluetooth menu (settings bluetooth) step 2: turn on bluetooth functionality step 3: turn on your bluetooth device and enable discovery. This varies with each device. Some devices require the power switch to be turned “on”. Other ...

  • Page 35: Troubleshooting

    Troubleshooting 32 • disconnecting. It takes 10-15 seconds for a bt device to connect or discon- nect from the system. Failure to wait for this time could result in an improper connection. Check to ensure device is connected in the bt submenu. • if the bluetooth device does not automatically reconne...

  • Page 36: Apps

    Apps all apps can be found and accessed under “apps” from the main menu. Open an app: • select the “apps” icon (fig. 2.10). • the application will open allowing you to select an app you would like to open (fig. 2.11). Fig. 2.10 33 fig. 2.11.

  • Page 37: Smartphone Mirroring

    Smartphone mirroring the p2-a employs a “happycast” smartphone mirroring system that is compatible with both apple airplay as well as android systems. Mirroring with an iphone or apple device: • select the “mirroring” icon (fig. 2.12). • the application will open allowing you to activate airplay on ...

  • Page 38: Iphone Smartphone Mirroring

    Iphone smartphone mirroring projector • you should already have the happy cast app opened on the projector and it will mirror the apple device • adjust the settings in the app if necessary turning on airplay • swipe up on your iphone and to access the airplay option as shown above • select airplay a...

  • Page 39: Android Smartphone Mirroring

    Android smartphone mirroring projector • you should already have the happy cast app open on the projector and it will mirror the android phone. • adjust the settings in the app if neces- sary. Downloading happycast app • please vist this url: http://www.Aaxat- ech.Com/happycast.Apk on your android p...

  • Page 40: Office Menu

    Office menu 37 microsoftofficeandadobepdfdocuments • microsoft office and adobe pdf documents can be viewed with the document viewer. • to access the document viewer, select “office” from the main menu. Main menu screen.

  • Page 41

    38 choosing documents to view • in the office application, select “folders” or “cloud storage” to view the files you wish to see. Viewing office documents cont. Office main menu officeviewerapplication • documents from the tf card and usb drive can be viewed. • documents from dropbox with accounts c...

  • Page 42

    39 step 1: open “office” viewing office documents cont. Step 2: select source.

  • Page 43

    Viewing productivity documents cont. 40 note: for a more comprehensive user guide please visit our faq section or search online for kingsoft wps office viewer user guide need help with the document viewer? Please e-mail us at pro_support@aaxatech.Com step 3: highlight the office file and click “ok” ...

  • Page 44: Settings Menu

    Settings menu 41 the settings menu can be accessed by selecting “settings” on the main menu •applicationmanager •networksettings •bluetoothsettings •systemsettings •backup&reset •projectorsettings •about •languagesettings within the settings menu, there are eight submenus that allow you to customize...

  • Page 45: Application Manager

    42 application manager application settings • the application manager allows the management of onboard applications. The primary purpose of the application manager is to reset or remove existing apps 1. Clearing the app data/cache – clearing the app cache is sometimes necessary to remove corrupted i...

  • Page 46: Network Settings

    Network settings 43 networksettings • please see connecting to wifi section on page 6 • click the 3 vertical points on the top-right corner and choose from “add network,” “saved network,” “refresh,” and “advanced” to adjust wifi settings • networknotification- choose whether to notify when a public ...

  • Page 47: Bluetooth Settings

    Bluetooth settings 44 bluetooth settings • for bluetooth connectivity please see the bluetooth (bt) page (page 31) • bluetooth enable on/off • after clicking the 3 vertical points on the top-right corner, there are three functions that can be chosen: “refresh,” “rename the device,” and “show receive...

  • Page 48: System Settings

    System settings • wireless&networks-wifi and bluetooth • device - display, projection, sound & notification, storage, battery, apps, and screenshot setting • personal - location, security, accounts, language & input, and backup & reset • system - date & time, accessibility, and about device all sett...

  • Page 49: Backup & Reset

    Backup & reset 46 back up my data • back up app data, wifi passwords, and other settings to google servers. Backup account • set a backup account to backup the data. Automatic restore • use this function to allow the automatic restore when reinstalling an app. Factory data reset • erase all data on ...

  • Page 50: Projector Settings

    Projector settings 47 • brightness – it allows the selection of different brightnesses as a result among front standard, eco, bright. • colortemp – it allows the selection of different color temperatures as a result among warm, standard, cold. • projection – it allows the selection of different view...

  • Page 51: About

    About the “about” displays the basic information of the projector which includes: about 48 • status • legal information • regulatory information • model number • android version • android security patch level • baseband version • kernel version • build number.

  • Page 52: Language Settings

    Language settings 49 languagesettings • selectingalanguage: the projector supports more than 30 languages • keyboard&inputmethod:the input method is a standard aosp english key- board • physical keyboard: chesen ps2 to usb converter • trackpad: pointer speed is adjustable language settings.

  • Page 53: Technical Details

    49 technical details chapter 4 imageisblurred possible causes solution the projector is not in focus adjust the focus with the focus adjustment dial until the image comes into focus the projector is offset from plane / angle of operation move the projector so that it is both 180 degrees and on an ev...

  • Page 54: Technical Details Cont.

    51 technical details cont. Theprojectordoesnotturnon possible causes solution there is no power check to ensure the power outlet source is good. Check the power adapter to ensure a proper connection with the wall outlet as well as the projector. Confirm that the unit is charged and has enough power ...

  • Page 55: Specifications

    52 specifications brightness: max resolution: nativeresolution: contrast ratio: aspect ratio: projectionlens: image size: lamp: video in: audio out: color: tf card: usb: dimensions: weight: power consumption: batterylife: supported file formats: conformances: android operating system: processor: ram...

  • Page 56: Notes

    53 notes.

  • Page 57

    Please direct all customer service inquiries to: aaxa technologies, inc. 17691 mitchell n., unit #b irvine, ca 92614 (714) 957-1999 info@aaxatech.Com.