1. DL manuals
  2. AAxeon
  3. Wireless Router
  4. 00P
  5. User Manual

AAxeon 00P User Manual

Manual is about: Industrial Wireless Router

Summary of 00P

  • Page 1

    Industrial wireless router apr-2000/apr-2000p user manual version 1.0

  • Page 2: Tables Of Content

    Apr-2000/apr-2000p user’s manual - 2 - tables of content getting to know your wireless router .................................................................................. 4 overview ...................................................................................................................

  • Page 3

    Apr-2000/apr-2000p user’s manual - 3 - system log .................................................................................................................. 45 traffic statistics ............................................................................................................ 46 w...

  • Page 4: Overview

    Apr-2000/apr-2000p user’s manual - 4 - 1 1 1 getting to know your wireless router overview the apr-2000 wireless router is designed to operate in industrial environment. The router provides a fast and effective means of communicating over a lan via wired or wireless. Multiple wan connection types ar...

  • Page 5: Hardware Features

    Apr-2000/apr-2000p user’s manual - 5 - advanced firewall released configuration to extend the capability and security, including virtual server, port trigger, dmz host, upnp auto forwarding, ip filter and mac filter. Hardware features fully compliant with ieee802.3af (power device at eth2, apr-2000p...

  • Page 6: Hardware Installation

    Apr-2000/apr-2000p user’s manual - 6 - 2 2 2 hardware installation installation router on din-rail each wireless router has a din-rail kit on rear panel. The din-rail kit helps router to fix on the din-rail. It is easy to install the router on the din-rail: step 1: slant the router and mount the met...

  • Page 7: Wall Mounting Installation

    Apr-2000/apr-2000p user’s manual - 7 - step 2: push the router toward the din-rail until you heard a “click” sound. Wall mounting installation each router has another installation method to fix the switch. A wall mount panel can be found in the package. The following steps show how to mount the rout...

  • Page 8

    Apr-2000/apr-2000p user’s manual - 8 - the screws specification shows in the following two pictures. In order to prevent switches from any damage, the screws should not larger than the size that used in apr-2000 pozidrive step 3: mount the combined router on the wall..

  • Page 9: Hardware Overview

    Apr-2000/apr-2000p user’s manual - 9 - 3 3 3 hardware overview front panel the following table describes the labels that stick on the apr-2000. Port description 10/100 rj-45 fast ethernet ports 2 10/100base-t(x) rj-45 fast ethernet ports support auto-negotiation. Default setting : speed: auto duplex...

  • Page 10

    Apr-2000/apr-2000p user’s manual - 10 - apr-2000 apr-2000p 1. 3.5ghz antenna with typical 2.0dbi antenna gain. 2. Led for p.O.E. Power and system status. When the p.O.E. Power links, the green led will be light on. 3. Led for pwr1 and system status. When the pwr1 links, the green led will be light o...

  • Page 11: Front Panel Leds

    Apr-2000/apr-2000p user’s manual - 11 - front panel leds led color status description p.O.E. Green/red green on p.O.E. Power connected. Red blinking indicates an ip conflict, or dhcp or bootp server did not respond properly pwr1 green/red on dc power 1 activated. Red blinking indicates an ip conflic...

  • Page 12: Bottom Panel

    Apr-2000/apr-2000p user’s manual - 12 - bottom panel the bottom panel components of apr-2000 are showed as below: 1. Terminal block includes: pwr1, pwr2 (12 ~ 48v dc) and relay output (1a@24vdc). 2. Reset bottom. Push the bottom 3 seconds for reset; 5 seconds for factory default. Pwr1, pwr2 (12-48v ...

  • Page 13: Cables And Antenna

    Apr-2000/apr-2000p user’s manual - 13 - 4 4 4 cables and antenna ethernet cables the apr-2000 switches have standard ethernet ports. According to the link type, the switches use cat 3, 4, 5,5e utp cables to connect to any other network device (pcs, servers, switches, routers, or hubs). Please refer ...

  • Page 14: Wireless Antenna

    Apr-2000/apr-2000p user’s manual - 14 - 10base-t/ 100base-tx mdi and mdi-x port pin outs. Mdi/mdi-x pins assignment pin number mdi port mdi-x port 1 td+(transmit) rd+(receive) 2 td-(transmit) rd-(receive) 3 rd+(receive) td+(transmit) 4 not used not used 5 not used not used 6 rd-(receive) td-(transmi...

  • Page 15: Management Interface

    Apr-2000/apr-2000p user’s manual - 15 - 5 5 5 management interface first-time configuration before installing apr-2000, check to make sure that all items in the package contents are in the box. In addition, you will need access to a computer equipped with an ethernet card or wireless card. Using an ...

  • Page 16

    Apr-2000/apr-2000p user’s manual - 16 - use either a straight-through cable or cross-over cable to connect apr-2000, if the led of the lan port lights up, it means the connection is established. After that, the computer will initiate a dhcp request to set an ip. Step 3: use the web-based manager to ...

  • Page 17

    Apr-2000/apr-2000p user’s manual - 17 - tools login setting and modify the password. Home the home screen will be shown when login successfully. Main interface in the page, you can check the firmware version, the router running time and the wan ip. Label description firmware show the version of cur...

  • Page 18

    Apr-2000/apr-2000p user’s manual - 18 - dynamic/static ip label description obtain an ip address automatically select this option if you would like to have an ip address automatically assigned to the wan port by dhcp server in your network. Use the following ip address select this option if you are ...

  • Page 19

    Apr-2000/apr-2000p user’s manual - 19 - pppoe screen. Label description user name/password enter the username & password provided by your internet service provider isp. Service name enter the service name provided by your isp. Ac name enter the name of the access concentrator as provided by your isp...

  • Page 20

    Apr-2000/apr-2000p user’s manual - 20 - connection is alive or lost. Example is as www.Google.Com 3. Wan connection type: modem/3g for using this type of connection, you need a usb 3g/3.5g device. Connect your usb 3g/3.5g device in to the usb port before connecting. Modem/3g screen label description...

  • Page 21

    Apr-2000/apr-2000p user’s manual - 21 - lan screen label description ip address the ip address of the lan interface, the default ip address is 192.168.10.1 subnet mask the subnet mask of the lan interface, the default subnet mask is 255.255.255.0 dhcp dhcp stands for dynamic host control protocol. T...

  • Page 22

    Apr-2000/apr-2000p user’s manual - 22 - ending ip the ending ip address for the dhcp server's ip assignment lease time the length of time for the ip lease. Enter the lease time. The default setting is 48 hours. Local domain name enter the local domain name of private network. It is optional. Current...

  • Page 23

    Apr-2000/apr-2000p user’s manual - 23 - wireless wireless screen label description ssid service set identifier (ssid) is a unique name that identifies a network. All devices on the network must share the same ssid name in order to communicate on the network. If you change the ssid from the default s...

  • Page 24

    Apr-2000/apr-2000p user’s manual - 24 - wireless security type-wep screen 1. Security type:select wep 2. Choose one of three auth modes: open, share and wepauto 3. Wep encryption: select 64 bit or 128 bit wep encryption. 4. Key type: select ascii or hex key type. 5. Default key index: select one of ...

  • Page 25

    Apr-2000/apr-2000p user’s manual - 25 - wireless security type-wpa/wpa2 screen 1. Security type: select wpa/wpa2 2. Auth mode: choose one of three auth modes: wpa, wpa2, wpa/wpa2 mix. 3. Encryption type: choose one of three encryption types: tkip, aes, tkip/aes mix. 4. Radius server ip: enter the ip...

  • Page 26

    Apr-2000/apr-2000p user’s manual - 26 - a dvanced s etting wireless 1. Parameters parameters screen label description beacon interval the default value is 100. The beacon interval value indicates the frequency interval of the beacon. A beacon is a packet broadcast by the ap to synchronize the wirele...

  • Page 27

    Apr-2000/apr-2000p user’s manual - 27 - than the preset rts threshold size, the rts/cts mechanism will not be enabled. The ap sends request to send (rts) frames to a particular receiving station and negotiates the sending of a data frame. After receiving an rts, the wireless station responds with a ...

  • Page 28

    Apr-2000/apr-2000p user’s manual - 28 - mac filter screen the following table describes the labels in this screen. Label description mac filter enable or disable the function of mac filter. Mac filter list this list shows the mac addresses that are in the selected filter. Connected clients this list...

  • Page 29

    Apr-2000/apr-2000p user’s manual - 29 - virtual server the following table describes the labels in this screen. Label description virtual server enable or disable virtual server. Description enter the description of the entry. Acceptable characters consists of '0-9', 'a-z', 'a-z'. This field can acc...

  • Page 30

    Apr-2000/apr-2000p user’s manual - 30 - port trigger screen the following table describes the labels in this screen. Label description port trigger enable or disable port trigger. Description this is the description for the entry. Trigger port this is the port used to trigger the application. Trigge...

  • Page 31

    Apr-2000/apr-2000p user’s manual - 31 - dmz enable or disable the dmz. Description description for the dmz host entry. Dmz host ip enter the ip address of the computer to be in the dmz. 4. Upnp the upnp (universal plug and play) feature allows the devices, such as internet computers, to access the l...

  • Page 32

    Apr-2000/apr-2000p user’s manual - 32 - ip filter screen label description ip filter enable or disable the ip filter. Description enter description for the entry. Rule select drop, accept and reject rule for the entry. Direction specify the direction of the data flow that is to be filtered. Ip addre...

  • Page 33

    Apr-2000/apr-2000p user’s manual - 33 - mac filter screen the following table describes the labels in this screen. Label description mac filter enable or disable the mac filter. Description enter the description for the entry. Rule select drop, accept and reject rule for the entry. Mac address enter...

  • Page 34

    Apr-2000/apr-2000p user’s manual - 34 - open vpn screen the following topology shows the common use of vpn connection from wan side. 1: open vpn server connection to open vpn server before connecting to the openvpn server of apr-2000, please install openvpn client software for your windows pc, downl...

  • Page 35

    Apr-2000/apr-2000p user’s manual - 35 - tunnel protocol select udp or tcp protocol. Port input the number about the port, and the default is 1194. Lzo compression enable or disable the function of lzo compression. Keys setting select auto to use the preset certificates, select manual to paste your c...

  • Page 36

    Apr-2000/apr-2000p user’s manual - 36 - the chart displays the open vpn server and client which connect each other. The server ip and client ip address should configure in the same network. 2. Pptp vpn the pptp (point to point tunneling protocol) vpn feature allows your wan pc connects to the router...

  • Page 37

    Apr-2000/apr-2000p user’s manual - 37 - pptp vpn screen the following topology shows the common use of pptp connection from wan side. Connection to pptp vpn server label description pptp server enable or disable pptp vpn server. Server ip enter the server side ip address, default is the lan port ip....

  • Page 38

    Apr-2000/apr-2000p user’s manual - 38 - primary host is unavailable while sending mail by smtp server. Server port specify the port where mta can be contacted via smtp server. E-mail address 1-4 enter the mail addresses. Snmp settings snmp settings label description snmp agent snmp (simple network m...

  • Page 39

    Apr-2000/apr-2000p user’s manual - 39 - syslog server ip not only the syslog keeps the logs locally, it can also log to remote server. Specify the ip of remote server. Leave it blank to disable logging remotely. Syslog server port specify the port of remote logging. Default port is 514. 2. System ev...

  • Page 40

    Apr-2000/apr-2000p user’s manual - 40 - ddns screen for example, choose ddns service: www.3322.Org and configure the following instructions: label description user name enter the user name for your ddns account. Password enter the password for your ddns account. Domain enter the domain names provide...

  • Page 41

    Apr-2000/apr-2000p user’s manual - 41 - date & time screen the following table describes the labels in this screen. Label description local date set local date manually. Local time set local time manually. Time zone select the time zone manually get current date & time from browser click this button...

  • Page 42

    Apr-2000/apr-2000p user’s manual - 42 - login setting screen label description old name this field shows the old login name. Old password before making a new setting, you should provide the old password for verification. Acceptable characters of this field contains '0-9', 'a-z', 'a-z' and must be be...

  • Page 43

    Apr-2000/apr-2000p user’s manual - 43 - router restart screen firmware upgrade firmware upgrade screen newer firmware may provide better performance, bug fixes or function extensions. To upgrade the new firmware, you need a firmware file which matches the model of router. It will take several minute...

  • Page 44

    Apr-2000/apr-2000p user’s manual - 44 - the following table describes the labels in this screen. Label description download configuration the current system settings can be saved as a file onto your pc. Upload configuration the saved settings can be restored to the router. To reload a system setting...

  • Page 45

    Apr-2000/apr-2000p user’s manual - 45 - s ystem s tatus system info system info screen this page displays the details information for the router, including model name, model description, firmware version, wan, lan and wireless settings. System log system log screen.

  • Page 46

    Apr-2000/apr-2000p user’s manual - 46 - the router keeps a running log of events and activities occurring on the router, serveral filters are provided for displaying related log entries. Click the button 'refresh' to refresh the page. Click the button 'clear logs' to clear the log entries. Traffic s...

  • Page 47: Technical Specifications

    Apr-2000/apr-2000p user’s manual - 47 - 6 6 6 technical specifications lan interface rj45 ports 2 x 10/100base-t(x), auto mdi/mdi-x protection built-in1.5kv magnetic isolation protocols icmp, ip, tcp, udp, dhcp, bootp, arp/rarp, dns, snmp mib ii, https, ssh, snmpv1/v2, trap, private mib p.O.E. Pd pr...

  • Page 48

    Apr-2000/apr-2000p user’s manual - 48 - 802.1x and radius supported tkip encryption wireless security ssid broadcast disable led indicators pwr 1(2) (p.O.E., apr-2000p) / ready: 1) red on: power is on and booting up. Red blinking: indicates an ip conflict, or dhcp or bootp server did not respond pro...

  • Page 49

    Apr-2000/apr-2000p user’s manual - 49 - appendix a: how to configure openvpn and use openvpn in the windows? Step 1: download openvpn-gui-1.0.3.Exe and run the install program. If there is a pop-up box opened at the course of the install, please you click “continue…” and finish the install. Default ...

  • Page 50

    Apr-2000/apr-2000p user’s manual - 50 - step 3: use the openvpn gui. (1). Open router web page and configure the advanced setting->vpn setting->open vpn. (2). In the openvpn server, open “c:\program files\openvpn\config” and run server.Ovpn. In the openvpn client, open “c:\program files\openvpn\conf...