AAxeon STE-501C Quick Start Manual - page 4
Quick Start Guide Version 1.3
Devolinx Serial-Ethernet Server
STE-501C
Copyright © 2007 Aaxeon Technologies, LLC
All rights reserved.
3
Assign a Static IP address by:
A. Using Telnet
1. Telnet to the STE-501C using DOS command “Telnet IP_address”. Example: telnet
10.0.50.100
2. Network, Link Mode, and COM Ports settings can be configured in the telnet window
B. Using Monitor.exe Utility
Use Monitor.exe which comes inside the Product CD to automatically search for all STE-501Cs
connected to ones local area network. Then please select the desired STE-501C to configure the
network setting individually.
C. Using Web Browser
1.
Make sure ones PC is located on the same network sub-net as the STE-501C
2.
Open a web browser, then type in the IP address of the STE-501C to be configured. Default
user name is admin and default password is null (leave it blank).
3.
The STE-501C’s network, link mode and COM ports settings can be configured in different
web pages.
4.
Click “Save Configuration” to save settings.
5.
Click ”Restart” button to make the change effective if necessary.
4. Pin Assignments
The pin assignments of DB9 connector on the STE-501C is shown in the following table:
Pin#
RS-232
Full Duplex
RS-485 2-wire
Half Duplex
RS-422/RS-485 4-wire
Full Duplex
1
DCD
N/A
N/A
2
RXD
N/A
TXD+
3
TXD
DATA+
RXD+
4
DTR
N/A
N/A
5
SG (Signal Ground)
SG (Signal Ground)
SG (Signal Ground)
6
DSR
N/A
N/A
7
RTS
DATA-
RXD-
8
CTS
N/A
TXD-
9
N/A
N/A
N/A
Customer Services and Supports
1. Contact your local dealers or Aaxeon Technical Support Center at the following numbers.
1-877-AAXEON5 (1-877-229-3665)
1-714-671-9000
2. Report the errors via website or e-mail
www.aaxeon.com
/
support@aaxeon.com