Ab Aqua Medic mV-Computer Operation Manual

Summary of Aqua Medic mV-Computer

  • Page 1

    1 operation manual for the mv computer-set with the purchase of this digital measuring and regulating equipment you have selected a top quality product. It has been specifically designed for aquaristic purposes. With this unit, you can continuously measure and control the redox-potential of the wate...

  • Page 2

    2 1. Basics the redox-potential or oxidation/reduction potential (orp) is an electrical value which is a parameter for the oxidation and reduction processes in the aquarium. The redox-potential is of special interest in: - assessing the quality of sea water in aquariums. The ideal range is between 3...

  • Page 3

    3 3. Description of the front panel 10 4. Installation 1. Connect to 230 v power source. 2. Connect the mv-probe. The unit is now ready for programming 1. Digital display 2. Prog/enter- button 3. Led for high/low- display 4. Set-button 5. Led for output-display 6. „+“ and „ -“ - button 7. High/low- ...

  • Page 4

    4 5. Adjustment of the control direction the status of the control direction is show ant the leds at the side(3): low – an adjusted minimum set point is controlled by the addition of an oxidising agent ( e.G. Ozone). The direction of control is upwards. This is the standard mode for control of the o...

  • Page 5

    5 9. Set up for control the orp with an ozoniser mv- monitoring and control at the aquarium with an ozoniser. 1. Mv computer 2. Ozoniser 3. Membrane air pump 4. Connection plug 5. Mv- elektrode 6. Protein skimmer 7. Aquarium the ph probe is placed in the aquarium at an dark and well circulated place...

  • Page 6

    6 we regret we are unable to accept any liability for any consequential loss. Please note that the product is not defective under the terms of this warranty where the product, or any of its component parts, was not originally designed and / or manufactured for the market in which it is used. These s...