AB-COM IPBOX 400S Manual - page 17
15
8.2 Dish Connection
Most effective and common setting methods are suggested below. Please choose one of these
ways to connect the dish-antennas and follow the instructions. Please carefully review the
instructions before you install.
8.2.1 Installing the PVR with two separated antennas.
In the LNB Setting menu, the connection type should be set to “separated.”
Two Satellite antennas are installed separately with a single universal LNB each.
While recording a channel from one Satellite, you can only watch or record channels from
the other Satellite.
Caution) To descramble two channels simultaneously, 2 CI Modules are required.
8.2.2 Installing the PVR with one antenna.
In the LNB Setting menu, the connection type should be set to” Loop Through”
Satellite Antenna has to be connected to the first LNB IN (the first one from the left: see
the picture below). The second LNB IN and IF OUT (the first one from the left) should be
connected with a coaxial cable. If the connection is done opposite way, the PVR will not be