AB IPBox 55HD User Manual - page 5
5
Technical specification – comparison of AB IPBox HD models
AB IPBox
9900 Plus HD
9900 HD
99 HD
55HD
1st. tuner
DVB-S2 embedded DVB-S2 embedded
DVB-S2 embedded
DVB-S2 embedded
2nd.tuner
DVB-S2 embedded DVB-S2 P&P optional DVB-S2 P&P optional no
2xCI
yes yes
no
no
CardReader
2x 2x
1x
1x
HDD
e-SATA/SATA e-SATA/S
ATA
SATA
USB
HDD bracket
yes yes
yes
no
USB 2
2x 2x
1x
1x
RS 232
yes yes
no
no
Display
VFD VF
D
VFD
4 Digit LED
Scart
2x 2x
1x
1x
RCA/YPBpBr
yes yes
no
no
Modulator
yes yes
no
no
Power Switch
yes yes
no
yes
Flash
32MB 32M
B
32MB
64MB
Memory
256MB 25
6MB
256MB
256MB
SPDIf
yes yes
yes
yes
Ethernet
yes yes
yes
yes
0/12V
yes yes
no
no
Technical parameters of AB IPBox HD receivers:
All AB IPBox 9900HD, 99HD and 55HD receivers are equipped with AB Enigma 2HD
operating system.
The AB IPBox 9900HD Plus receiver is standardly equipped with two DVB-S tuners that
enables simultaneous watching and recording of 2 channels from different
transponders/satellites.
Technical parameters of the AB IPBox 9900HD Plus and AB IPBox 9900HD are the same.
The only difference is that the AB IPBox 9900HD model is standardly equipped with just one
DVB-S2 tuner and is equipped with connector for connecting another tuner: DVB-T
terrestrial, DVB-C cable or DVB-S2 satellite. See table below for detailed technical
specification.
The AB IPBox 9900 models are equipped with 2 CI (Common Interface) slots and Conax
card readers.
All AB IPBox 99xxHD models are prepared for installation of internal 2,5“ SATA HDD up to
1,5 TB.