AB IPBox 9I HD User Manual - page 15

14

12.3. DVB-S/S2 Satellite Configuration (DVB-S2 tuner option only)

 The Satellite Configuration menu will appear automatically right after adjusting the Local Time when first

installation.

12.3.1 Set each LNB parameter.

SAT Name, Tuner ID, LNB Type, Local Freq, DiSEqC, 22 KHz, and TP Freq by pressing LEFT/

RIGHT button or OK button as your LNB and dish aimed. You can see whole selectable values of

each item by pressing OK button. You will see the Signal indicator as yellow and green if all values

are set correctly.

12.3.2 Automatic Scan of the satellites

This is to scan all the channels of the satellites you setup in Satellite Configuration menu. Select tuner ID

and Satellite Name, Network Search option and Search Method option by pressing LEFT/RIGHT button

and press OK on SEARCH to start scanning.