AB Quality 6189V-35HDDST160 Installation Instructions Manual

Summary of 6189V-35HDDST160

  • Page 1

    Publication 6177r-in002b-en-p - november 2009 installation instructions hard disk drive (hdd) catalog number 6189v-35hddst80, 6189v-35hddst160 about this publication this publication provides pre- and post-installation information and procedures on how to install or replace a serial ata (sata) hard ...

  • Page 2: Important User Information

    2 hard disk drive (hdd) publication 6177r-in002b-en-p - november 2009 important user information solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety guidelines for the application, installation and maintenance of solid state controls (pub...

  • Page 3: Voltage Precautions

    Hard disk drive (hdd) 3 publication 6177r-in002b-en-p - november 2009 electrostatic discharge (esd) precautions follow these precautions to prevent esd discharge. • transport the computer and replacement parts in static-safe containers such as conductive tubes, bags, or boxes. • keep electrostatic-s...

  • Page 4: Before You Begin

    4 hard disk drive (hdd) publication 6177r-in002b-en-p - november 2009 before you begin review the specifications of a new component before installing it to make sure it is compatible with the computer. Record the model and serial number, and any other pertinent information of new components for futu...

  • Page 5: Install The Hard Disk Drive

    Hard disk drive (hdd) 5 publication 6177r-in002b-en-p - november 2009 install the hard disk drive you can replace the default hard disk drive (hdd) or install an hdd in the empty hdd bay. The computers have two hdd bays for installing sata hdd modules. Remove the side cover on the 750r computer to r...

  • Page 6

    6 hard disk drive (hdd) publication 6177r-in002b-en-p - november 2009 install or replace the sata hard disk drive (hdd) to install or replace an hdd drive: 1. Unlock the front door, if necessary, and open it to access the hdd bays. On the 1450r computer, the hdd is secured behind the front door. 2. ...

  • Page 7

    Hard disk drive (hdd) 7 publication 6177r-in002b-en-p - november 2009 if you are going to install a new hdd rather than replacing the default one, proceed to step 4. 3. Remove the hdd module from its carrier. A. Remove the four screws from the bottom of the hdd assembly carrier. B. Detach the carrie...

  • Page 8

    8 hard disk drive (hdd) publication 6177r-in002b-en-p - november 2009 5. Install the hdd assembly to its bay. A. Slide the hdd assembly into its bay. B. Tighten the two captive thumbscrews of the hdd carrier to secure the drive. 6. Proceed to step 9 for the 1450r computer. 7. Replace the screw secur...

  • Page 9: Reinstall The Cover

    Hard disk drive (hdd) 9 publication 6177r-in002b-en-p - november 2009 reinstall the cover after completing any removal or replacement procedure of internal components, reinstall the side cover. 1. Make sure the computer is in its normal upright position. 2. Perform steps 1…3 of the post-installation...

  • Page 10: Post-Installation Procedure

    10 hard disk drive (hdd) publication 6177r-in002b-en-p - november 2009 post-installation procedure perform this post-installation procedure after installing or removing a hardware component. 1. Make sure all components are installed according the step-by-step instructions. 2. Make sure that no loose...

  • Page 11

    Hard disk drive (hdd) 11 publication 6177r-in002b-en-p - november 2009.

  • Page 12: Rockwell Automation Support

    Publication 6177r-in002b-en-p - november 2009 pn 41061-379-01(2) supersedes publication 6177r-in002a-en-p - august 2006 copyright © 2009 rockwell automation, inc. All rights reserved. Printed in china.. Rockwell automation support rockwell automation provides technical information on the web to assi...