Bdi access jtag interface library arm7 / arm9 installation manual manual version 1.02 for bdi1000 © 1992-2008 abatron ag.
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 2 © copyright 1992-2008 by abatron ag v 1.02 1 introduction ................................................................................................................................. 3 1.1 bdi1000.........................
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 3 © copyright 1992-2008 by abatron ag v 1.02 1 introduction the bdiaccess library can be used to access the bdi1000 functions. With this library, a program run- ning on a windows/linux/unix host can take advantage of the jtag...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 4 © copyright 1992-2008 by abatron ag v 1.02 2 installation 2.1 connecting the bdi1000 to target the enclosed cables to the target system are designed for the arm development boards. In case where the target system has the sa...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 5 © copyright 1992-2008 by abatron ag v 1.02 target a connector signals the bdi1000 works also with targets which have no dedicated trst pin. For this kind of targets, the bdi cannot force the target to debug mode immediately...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 6 © copyright 1992-2008 by abatron ag v 1.02 2.1.1 changing target processor type before you can use the bdi1000 with an other target processor type (e.G. Arm ppc), a new setup has to be done (see chapter 2.6 «configuration»)...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 7 © copyright 1992-2008 by abatron ag v 1.02 2.2 connecting the bdi1000 to power supply 2.2.1 external power supply the bdi1000 needs to be supplied between 2.5v and 5v via the power connector. The available power supply from...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 8 © copyright 1992-2008 by abatron ag v 1.02 2.2.2 power supply from target system the bdi1000 needs to be supplied between 2.5v and 5v via target a connector. This mode can only be used when the target system runs between 2....
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 9 © copyright 1992-2008 by abatron ag v 1.02 2.3 status led «mode» the built in led indicates the following bdi states: mode led bdi states off the bdi is ready for use, the firmware is already loaded. On the power supply for...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 10 © copyright 1992-2008 by abatron ag v 1.02 2.4 connecting the bdi1000 to host 2.4.1 serial line communication the host is connected to the bdi through the serial interface (com1...Com4). The communication cable between bdi...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 11 © copyright 1992-2008 by abatron ag v 1.02 2.4.2 ethernet communication the bdi1000 has a built-in 10 base-t ethernet interface (see figure below). Connect an utp (un- shilded twisted pair) cable to the bd1000. For thin et...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 12 © copyright 1992-2008 by abatron ag v 1.02 2.5 installation of the configuration software on the enclosed cd you will find the bdiaccess library, the bdi configuration software and the firm- ware required for the bdi. Copy...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 13 © copyright 1992-2008 by abatron ag v 1.02 2.6 bdi1000 setup/update first make sure that the bdi is properly connected (see chapter 2.1 to 2.4). The bdi must be con- nected via rs232 to the windows host. To avoid data line...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 14 © copyright 1992-2008 by abatron ag v 1.02 2.6.2 windows hosts after starting the windows setup tool, the following dialog box will be displayed. Dialog box «bdi1000 update/setup» the following options allow you to update ...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 15 © copyright 1992-2008 by abatron ag v 1.02 bdi ip address enter the ip address for the bdi1000. Use the following format: xxx.Xxx.Xxx.Xxx e.G.151.120.25.101 ask your network administrator for assigning an ip address to thi...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 16 © copyright 1992-2008 by abatron ag v 1.02 3 specifications operating voltage limiting 2.5 ... 5.25vdc power supply current (max) 900ma@2.5v 700ma@3.3v 450ma@5.0v rs232 interface: baud rates 9’600,19’200, 38’400, 57’600,11...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 17 © copyright 1992-2008 by abatron ag v 1.02 4 environmental notice disposal of the equipment must be carried out at a designated disposal site. 5 declaration of conformity (ce).
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 18 © copyright 1992-2008 by abatron ag v 1.02 6 warranty abatron switzerland warrants the physical cd, cable, bdi1000 and physical documentation to be free of defects in materials and workmanship for a period of 36 months fol...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 19 © copyright 1992-2008 by abatron ag v 1.02 appendices a troubleshooting problem the firmware can not be loaded. Possible reasons • the bdi is not correctly connected with the target system (see chapter 2). • the power supp...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 20 © copyright 1992-2008 by abatron ag v 1.02 b maintenance the bdi needs no special maintenance. Clean the housing with a mild detergent only. Solvents such as gasoline may damage it. If the bdi is connected correctly and it...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 21 © copyright 1992-2008 by abatron ag v 1.02 observe precautions for handling (electrostatic sensitive device) unplug the cables before opening the cover. Use exact fuse replacement (microfuse msf 1.6 af). 4 5 4.1 while hold...
Bdi access jtag interface library, bdi1000 (arm7/9/9e) installation manual 22 © copyright 1992-2008 by abatron ag v 1.02 c trademarks all trademarks are property of their respective holders..