Summary of ARR600
Page 1
Wireless i/o gateway arr600 product guide.
Page 2
Contents 1. Description..................................................................... 3 2. Complete communication system...................................3 3. Application..................................................................... 4 4. Physical interfaces...............................
Page 3
1. Description wireless i/o gateway arr600 provides wireless monitoring and control of field devices via cellular network from a central site or a control center. The devices offer industrial quality connectivity for the iec 60870 and modbus based protocols. Field applications can be connected and c...
Page 4
3. Application wireless i/o gateway arr600 can be used in the feeder automation and substation applications to automate distribution network in cooperation with the other abb grid automation equipment. Further, the devices can be used in secondary substations for monitoring of transformers as well a...
Page 5
For communication to an upper-level system, arr600 supports gprs, 3g (wcdma) and 4g (lte) connectivity. Led panel description the led panel of the device contains ten leds to indicate the complete operational status of the device. 1 6 2 3 4 5 7 8 9 10 guid-899117c2-bdbc-4d56-a277-299ac3e6120a v1 en ...
Page 6
Table 1. Description of available leds led label state description 1 batt - led unassigned 2 status on vpn connection is up flashing vpn connection is starting off vpn connection is disabled 3 power/error on operating power is turned on off operating power is turned off 4 function on device is start...
Page 7
Front panel 3 2 4 5 6 7 8 1 guid-5a2b7768-3994-4264-86ab-939b14e2d5ee v1 en figure 4. Front panel with io-1 1 power supply 12...48 vdc 2 io-1 digital i/o connector (only in certain product models) 3 lan/wan port 4 console/application serial port 5 power switch 6 console/serial port switch 7 dip swit...
Page 8
3 2 4 5 6 7 8 1 guid-50b15e54-d86b-4361-b9b8-9bd5afaa66c7 v1 en figure 5. Front panel with io-2 1 power supply 12...48 vdc 2 io-2 digital and analog i/o connector (only in certain product models) 3 lan/wan port 4 console/application serial port 5 power switch 6 console/serial port switch 7 dip switc...
Page 9
5. Communication wireless i/o gateway arr600 provides a complete solution for integrating the remote serial (rs-232/rs-485) or ethernet devices with a central management system over a gprs, 3g or lte connection. Several interfaces are available for field device connectivity: digital inputs and outpu...
Page 10
6. Technical data table 2. Dimensions description value width × height × depth 108 × 45 × 175 mm (without antenna) 108 × 45 × 175 mm (without antenna) for single sim variants table 3. Hardware description value processor environment processor 32 bit risc memory 128 mb flash 128 mb ram power power su...
Page 11
Table 6. Supported protocols for i/o controlling master protocol iec 60870-5-104 modbus tcp snmp 1 2 guid-bccdafb3-3a96-42e6-a55e-8cc66e37133b v1 en figure 7. I/o connector pin numbering for io-1 1 pin 1 2 pin 15 table 7. I/o connector pins for io-1 (8di+2do) pin symbol description 1 v+ vcc out 2 di...
Page 12
1 2 3 4 guid-37d5163f-322b-4d9f-908d-5493c81e8f8a v1 en figure 8. I/o connector pin numbering for io-2 1 dio pin 1 2 dio pin 12 3 aio pin 1 4 aio pin 8 wireless i/o gateway 1mrs758464 a arr600 product version: a 12 abb.
Page 13
Table 8. I/o connector pins for io-2 (6di+4do+2ai) pin/connector type description aio_1 analog input positive pin of analog input 1, 4...20 ma aio_2 analog input negative pin of analog input 1 aio_3 analog input positive pin of analog input 2, 4...20 ma aio_4 analog input negative pin of analog inpu...
Page 14
Table 9. Network interfaces description value ethernet ports ethernet/lan 10/100 base-t. Shielded rj-45 1.5 kv isolation transformer ethernet ieee 802-3, 802-2 serial ports serial 1/console rs-232 dte male db-9 connector iec 60870-5-101 protocol support full serial and modem signals 300...460 800 bp...
Page 15
Table 12. Electromagnetic compatibility tests (single sim variants) description reference emission tests according to the test specification iec 61850-3 (edition 2.0 2013-12) radiated disturbance cispr 16-2-3 conducted disturbance cispr 16-2-1 immunity tests according to the test specification iec 6...
Page 16
7. Mounting the devices have been equipped with mounting arrangements that are specially designed for din rail mounting. A set of din rail mounting clips is recommended to be used when mounting. The device should be mounted preferably inside a robust, locked and weatherproof control cabinet. As the ...
Page 17
9. Accessories and ordering data table 15. Accessories accessory description order code rooflex puck antenna gprs, 3g and lte compatible antenna. Sma (m) connector. Gain 0 dbi. 2rca037240 rooflex laird phantom gprs, 3g and lte compatible antenna. Sma (m) connector. Gain 5.5 dbi. 2rca037660 din rail ...
Page 18
12. Document revision history document revision/date product version history a/2015-12-18 a first release wireless i/o gateway 1mrs758464 a arr600 product version: a 18 abb.
Page 19
19.
Page 20
Contact us abb oy medium voltage products, distribution automation p.O. Box 699 fi-65101 vaasa, finland phone +358 10 22 11 fax +358 10 22 41094 www.Abb.Com/mediumvoltage www.Abb.Com/substationautomation 1mrs758464 a © copyright 2015 abb. All rights reserved..