ABB Busch-ComfortTouch 12.1 Operating Instructions Manual - page 29

Operating Instructions 

Busch-ComfortTouch

®

Operation 

Operating Instructions | 1473-1-8041 

— 29 — 

-  Operating pages: 

Operating pages can be freely configured via the project planning software of the 

Busch-ComfortTouch

®

 and 

are used to provide building control functions (lights, blinds, room temperature controller, etc.). You can, for 

instance, operate all the blinds on the one operating page and all the home lights on the next. You could also 

use the operating page for all the functions of one room and the next page for all functions of the next. The 

type of structuring you wish to use is left to you. Please contact your electrical installer who will set up the 

Busch-ComfortTouch

®

 for you individually and according to your wishes. 

-  Application pages: 

The 

Busch-ComfortTouch

®

can be equipped with a range of applications (e.g. calendar, Media Player, etc.). 

For this the application pages are inserted into the 

Busch-ComfortTouch

®

 via its project planning software. 

Please contact your electrical installer who will set up the 

Busch-ComfortTouch

®

 for you individually and 

according to your wishes. Each application page has access in the navigation bar. 

Note 

The page types can contain buttons, control elements as well as input options. The basic operation 

is explained in section "Control processes at the touchdisplay". 

5.3.2 

Basic functions of switching, dimming, blinds, value, scenes, RTC and measured values 

The basic functions are carried out via the operating page with the aid of control elements. These control 

elements are described in detail in section "Control processes at the touchdisplay" -> "Control elements".