ABB doGATE Installation Instructions Manual - page 6
Technical Reference Manual
doGATE - Installation instruction
Installation
Technical Reference Manual | 1473-1-8479
— 6 —
4
Installation
4.1
Using precautions
Caution
Risk of damaging the device !
The following using precautions must be observed. Otherwise risk of damaging the device is
possible:
•
Do not install in an overheated environment.
•
Do not install in a overly humid environment.
•
Do not cover doGATE in order to keep natural ventilation.
•
Make sure to check input voltage and polarity before plugging the power supply.
•
Connect and disconnect peripherals after powering off doGATE.
•
Before unplugging power supply, press Power button to stop doGATE.
•
IT IS RECOMMENDED TO USE AN UNINTERRUPTIBLE POWER SUPPLY IN ORDER
TO AVOID MALFUNCTION OR DEVICE DETERIORATION.
Guaranty does not apply if doGATE has been opened!
4.2
Power On – Power Off
By pressing the button, you start or stop doGATE.
Light
Status
Light is off
doGATE has no power supply.
Light is red
doGATE has power supply and is stopped.
Light is green
doGATE is working.
Red: Off
Green: On