1. DL manuals
  2. ABB
  3. Control Unit
  4. FENA-01
  5. Hardware Manual

ABB FENA-01 Hardware Manual

Other manuals for FENA-01: User Manual, Protocol Manual
Manual is about: Ethernet adapter module

Summary of FENA-01

  • Page 1

    Abb drives hardware manual ethernet adapter module fena-01.

  • Page 3: Hardware Manual

    Ethernet adapter module fena-01 hardware manual 3aua0000022986 rev a en effective: 31.3.2008 © 2008 abb oy. All rights reserved..

  • Page 5: Safety Instructions

    Safety instructions 5 safety instructions overview this chapter states the general safety instructions that must be followed when installing and operating the fena-01 ethernet adapter module. The material in this chapter must be studied before attempting any work on, or with, the unit. In addition t...

  • Page 6

    Safety instructions 6.

  • Page 7: Table of Contents

    Table of contents 7 table of contents safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 general safety instructions . . . . ....

  • Page 8

    Table of contents 8 definitions and abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 fena-01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 9: Introduction

    Introduction 9 introduction intended audience the manual is intended for people responsible for installing, commissioning and using the fena-01 ethernet adapter module. The reader is expected to have a basic knowledge of electrical fundamentals, electrical wiring practices and how to operate the dri...

  • Page 10

    Introduction 10 what this manual contains this manual contains information on the wiring, configuration and use of the fena-01 ethernet adapter module. Safety instructions are featured in the first few pages of this manual. Overview contains short descriptions of the ethernet networking, the fena-01...

  • Page 11: Overview

    Overview 11 overview overview this chapter contains a short description of the ethernet, the fena-01 ethernet adapter module, and a delivery checklist. Ethernet ethernet standards support a variety of physical media (coaxial cable, twisted pair, fiber optics) and topologies (bus and star). The fena-...

  • Page 12

    Overview 12 the fena-01 ethernet adapter module the fena-01 ethernet adapter module is an optional device for abb drives which enables the connection of the drive to an ethernet network. Through the fena-01 ethernet adapter module it is possible to: • give control commands to the drive (start, stop,...

  • Page 13

    Overview 13 figure 2. The construction of the ethernet link and the fena-01 adapter module. Ethernet connector x1 (see chapter "electrical installation" ) diagnostic leds (see chapter “diagnostics” in appropriate protocol manual) ethernet node abb drive ethernet node hub, switch or router chassis sc...

  • Page 14

    Overview 14 compatibility the fena-01 is compatible with ethernet standards ieee 802.3 and ieee 802.3u. Note that compatibility with these ethernet standards does not imply support for any higher level protocols (eg, modbus/tcp). Verify support for desired protocol and features with the appropriate ...

  • Page 15: Mechanical Installation

    Mechanical installation 15 mechanical installation warning! Follow the safety instructions given in this manual and the drive documentation. Mounting the fena-01 is to be inserted into an available fieldbus adapter slot. The module is held in place with plastic pins and one screw. The screw also pro...

  • Page 16

    Mechanical installation 16.

  • Page 17: Electrical Installation

    Electrical installation 17 electrical installation overview this chapter contains: • general cabling instructions • instructions for connecting the module to the ethernet. Warning! Before installation, switch off the drive power supply. Wait 5 minutes to ensure that the capacitor bank of the drive i...

  • Page 18

    Electrical installation 18.

  • Page 19

    Definitions and abbreviations 19 definitions and abbreviations communication module communication module is a name for a device (eg, a fieldbus adapter) through which the drive is connected to an external serial communication network (eg, a fieldbus). The communication with the communication module ...

  • Page 20

    Definitions and abbreviations 20

  • Page 21: Technical Data

    Technical data 21 technical data fena-01 enclosure: mounting: into the option slot on the drive. Degree of protection: ip20 ambient conditions: the applicable ambient conditions specified for the drive in its manuals are in effect. Indicators: three bicolor leds (host, module, network) connectors: •...

  • Page 22

    Technical data 22 power supply: +3.3 v ±5% max. 400 ma (supplied by the drive) general: • estimated min. Lifetime: 100 000 h • all materials ul/csa-approved • complies with emc standards en 61000-6-4:2001and en 61800-3 fieldbus link compatible devices: ethernet standard ieee 802.3 and ieee 802.3u de...

  • Page 24

    Abb oy ac drives p.O. Box 184 fi-00381 helsinki finland telephone +358 10 22 11 fax +358 10 22 22681 internet http://www.Abb.Com abb inc. Automation technologies drives & motors 16250 west glendale drive new berlin, wi 53151 usa telephone 262 785-3200 800-help-365 fax 262 780-5135 3aua00 000229 86 r...