ABB M2303 Manual - page 58
Manual is about: Guard Unit
of
77
ABB-Welcome
Error! Use the Home tab
to apply
标题
1 to the
text that you want to
appear here.
|
— 58 —
4.2.10.4 Call code settings
Fig. 32
Call code settings
To the “Call code settings” menu has the following functions:
No.
Functions
1
Code type
- Change the code type by ticking the box (automatic switchover) or
pressing
the “Plus / Minus” buttons.
- A user can select and click on a physical address to call an indoor
station.
- A user can select and click on a logic address (The logic address is set in
the “user list management” menu).
2
Digit
- When choosing a logic address, you should set the digits of the logic
Back
CALL CODE SETTING
Physical Address
OK
-
3
4
1
2
Code Type
05
Digit
+