1. DL manuals
  2. ABB
  3. Adapter
  4. SLTA Option Card Serial LonTalk
  5. Technical Reference Manual

ABB SLTA Option Card Serial LonTalk Technical Reference Manual

Manual is about: SLTA Option Card

Summary of SLTA Option Card Serial LonTalk

  • Page 1

    Abb automation slta option card serial lontalk adapter technical reference manual.

  • Page 2

    2 abb automation serial lontalk adapter technical reference manual slta option card.

  • Page 3

    Abb automation 3 serial lontalk adapter technical reference manual slta option card issued: 5.1.1998 version: b2/9.5.2000 checked: m.K. Approved: t.S. We reserve the right to change data without prior notice. Contents: 1. Introduction ....................................................................

  • Page 4: 1. Introduction

    4 abb automation 1mrs 750107-mum serial lontalk adapter technical reference manual slta option card 1. Introduction the serial lontalk adapter (slta) option card is designed to be used in the lon star coupler rer 111. This device is not a "stand-alone" device. The slta option card is a network inter...

  • Page 5: 2. Applications

    1mrs 750107-mum serial lontalk adapter technical reference manual slta option card abb automation 5 2. Applications when integrated into the rer 111 unit, the slta option card provides an rs232 connection from the host to the l on w orks network. The rs232 connection can be used by any host. A netwo...

  • Page 6: 3. Functions

    6 abb automation 1mrs 750107-mum serial lontalk adapter technical reference manual slta option card 3. Functions 3.1. General the slta option card contains one fibre-optic transmitter/receiver pair and one rs232 interface. Both of these communication interfaces are connected to the slta core module,...

  • Page 7

    1mrs 750107-mum serial lontalk adapter technical reference manual slta option card abb automation 7 there is also a led for the rs232 receiver. This led flashes when a message is received. 3.3. Fibre-optic interface the slta option card is equipped with a single fibre-optic transceiver pair. This fi...

  • Page 8

    8 abb automation 1mrs 750107-mum serial lontalk adapter technical reference manual slta option card 4. Mechanical and electrical design 4.1. Block diagram )lj %orfn'ldjudpriwkh6/7$rswlrqfdug 4.2. Mechanical structure the slta option card is built on a printed circuit board (pcb) of size 100 mm x 160...

  • Page 9: 5. Interfaces

    1mrs 750107-mum serial lontalk adapter technical reference manual slta option card abb automation 9 5. Interfaces 5.1. General the slta option card has 5 separate interfaces: - a 64-pin e1 card connector for connection to the mother board of the rer 111 unit - a fibre-optic transceiver pair - a 9-pi...

  • Page 10

    10 abb automation 1mrs 750107-mum serial lontalk adapter technical reference manual slta option card )lj &deohsurwhfwlyhvklhogfrqqhfwlrq 5.2.2. 3-wire connection to a host the diagram below illustrates the cable requirements for 3-wire connection to a host. )lj 'ldjudpirudzluhfrqqhfwlrq 5.2.3. 8-wir...

  • Page 11

    1mrs 750107-mum serial lontalk adapter technical reference manual slta option card abb automation 11 5.3. Fibre-optic interface for more information regarding the fibre-optic connection of option cards, refer to the rer 111 manual 1mrs750104-mum, chapter 6.2. 5.4. Service switch the service switch i...

  • Page 12

    12 abb automation 1mrs 750107-mum serial lontalk adapter technical reference manual slta option card 6. Installation, configuration and programming 6.1. Installation as the slta option card is not intended for "stand-alone" use, it has to be installed in the rer 111 unit. It can be placed in any of ...

  • Page 13

    1mrs 750107-mum serial lontalk adapter technical reference manual slta option card abb automation 13 6.2.2. Configuration of autobaud, baud rate and other communication parameters the s2 jumper group consists of 9 individual jumpers. -xpshu- is not used. -xpshu- j2 defines the network interface link...

  • Page 14

    14 abb automation 1mrs 750107-mum serial lontalk adapter technical reference manual slta option card -xpshu- j6 is used to select whether the slta option card is to use automatic bit rate detection. When this function is used the autobaud slta matches the serial bit rate of the slta with the serial ...

  • Page 15

    1mrs 750107-mum serial lontalk adapter technical reference manual slta option card abb automation 15 - 3-wire interface - autobaud disabled - communication speed of 9600 bit/s )lj )dfwru\ghidxowvhwwlqjirumxpshujurxs6rqwkh6/7$rswlrq fdug 6.3. Programming of the slta option card before the slta option...

  • Page 16: Technical Data

    16 abb automation 1mrs 750107-mum serial lontalk adapter technical reference manual slta option card 7. Technical data interfaces rs232 interface 9-pin d-type female connector max cable length 12 m max number of slta option cards in one rer 111 unit 3 fibre-optic interface glass fibre with st-type c...

  • Page 17

    1mrs 750107-mum serial lontalk adapter technical reference manual slta option card abb automation 17 climatic environmental tests dry heat test according to iec 60068-2-2 +55 ° c dry cold test according to iec 60068-2-1 -10 ° c damp heat test according to iec 60068-2-30 rh = 93%, 55 ° c, 6 cycles.

  • Page 18: Maintenance and Service

    18 abb automation 1mrs 750107-mum serial lontalk adapter technical reference manual slta option card 8. Maintenance and service 8.1. Self diagnostics 8.1.1. Fibre-optic receiver led the receiver led flashes when a message is being received from the fibre-optic channel. If the led is continuously lit...

  • Page 19: Ordering Information

    1mrs 750107-mum serial lontalk adapter technical reference manual slta option card abb automation 19 9. Ordering information please state the following information in your order: 1. Quantity 2. Type of fibre-optic transceivers 3. Rs232 cable (if required). Example: 2 pcs sslta-c-mm 7zr6/7$rswlrqfdug...

  • Page 20: Appendix A

    20 abb automation 1mrs 750107-mum serial lontalk adapter technical reference manual slta option card appendix a default values of communication parameters and buffers for the slta option card. These values are set during manufacturing and they are stored in the eeprom memory of the neuron chip. The ...

  • Page 21

    1mrs 750107-mum serial lontalk adapter technical reference manual slta option card abb automation 21 echelon, lon, lonbuilder, lonmanager, lontalk, lonworks, neuron and 3150 are u.S. Registered trademarks of echelon corporation. Lonlink, lonmark, lonsupport, lonusers, lonmaker and 3120 are trademark...

  • Page 22

    22 abb automation 1mrs 750107-mum serial lontalk adapter technical reference manual slta option card.

  • Page 24

    Abb substation automation oy p.O. Box 699 fin-65101 vaasa finland tel. +358 10 224 000 fax. +358 10 224 1094 www.Abb.Fi 1mr s 75 0107- mu m e n 0 5 .2000