Abbot & Ashby ATBG600/8 Manual

Summary of ATBG600/8

  • Page 1

    Atbg600/8 bench grinder bench grinder atbg600/8 230v-50hz 600 watt 200mm x 25mm wheel size.

  • Page 2: Atbg600/8 Bench Grinder

    Atbg600/8 bench grinder 2 specifications model number : atbg600/8 nominal voltage 230volt 50hz power consumption 600 watts no load speed 2880 rpm weight 23kg wheel size 200 x 25 x 12mm mounting holes adjustable tool rest eye shield mounting holes on / off switch.

  • Page 3: Atbg600/8 Bench Grinder

    Atbg600/8 bench grinder 3 protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference. Introduction. Dear customer, t...

  • Page 4: Atbg600/8 Bench Grinder

    Atbg600/8 bench grinder 4 c) do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. D) do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or movin...

  • Page 5: Atbg600/8 Bench Grinder

    Atbg600/8 bench grinder 5 b) do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. C) disconnect the plug from the power source before making any adjustments, chang- ing accessories, or storing...

  • Page 6: Atbg600/8 Bench Grinder

    Atbg600/8 bench grinder 6 • do not use grinding wheels that are larger than specified, only use grinding wheels that are rated for the machine. The rotational speed shown on the grinding wheel should always be higher than the rotational speed of the machine. • always fit the blotter or paper washers...

  • Page 7: Atbg600/8 Bench Grinder

    Atbg600/8 bench grinder 7 getting started accessories the bench grinder is supplied with the following accessories: 2 eye shields with mounting brackets and 2 tool rests caution. Always ensure that the bench grinder is switched off and plug is removed from the power point before making any adjustmen...

  • Page 8: Atbg600/8 Bench Grinder

    Atbg600/8 bench grinder 8 warranty : this product has been manufactured to a high quality standard. It is guaranteed against faulty materials and workmanship for 24 months from the date of purchase. Please retain your re- ceipt as proof of purchase. If the product is found to be defective within the...