Abc 23kW SUPER VULCANO User Manual - 7.4 Alarms

13

7.4 Alarms

Safety Thermostat HV 1

Safety Pressure Switch HV 2

Shutting down due to the low temperature of exhaust gases / high

temperature in the hoper

Shutting down due to too high water temperature

Shutting down due to too high temperature of exhaust gases

Encoder error

Encoder error. This error may occur due to the setting of round numbers.

High water pressure

Low water pressure

Clock error in the real time

Shutting down due to the failed ignition

Lack of electricity

Communication error RS485

Error in the air flow regulator

Lack of pellets

Active probe of the boiler, buffer or return line

Faulty motor for burner cleaning

Faulty motor for cleaning

Faulty motor for cleaning 2

Vacum is below the minimum

Vacum is above the maximum 

Faulty sensor of the air flow regulator

The minimum air flow in the Check-up phase has not been reached

The maximum air flow has been reached (F40)

Description

Alarm

Er 01 

Er 02 

Er 03 

Er 04 

Er 05 

Er 07 

Er 08

Er 09 

Er 10 

Er 11 

Er 12 

Er 15 

Er 16 

Er 17 

Er 18 

Er 23 

Er 25 

Er 26 

Er 27 

Er 34 

Er 35 

Er 39 

Er 41 

Er 42

Sond 

Service

Clean 

Ignition Block 

Er 20 

Door 

Er 06 

Link Error 

Visualisation of the condition of temperature probes

Notification that the defined period for product servicing has expired

Notification that it is time to clean the product

This message will appear if the system has been shut down in the ignition

period by en external device: the system stops when enters operation phase 

Grid sensor open

Open door

Pellet thermostat active

Error in communication between the motherboard and display

Other messages: