Abc 9kW LILLY User Manual - 8.4 Calibration

Midnight time settings: 

Set the ON time of the previous day at the desired time (for example, 

20.30)

Set the OFF time of the previous day at 23.59 Set the ON time for the 

next day at 00.00 Set the OFF time for the next day (for example, 

6.30) 

The system will be ON on Thursday at 20.30 and OFF on Wednesday 

at 6.30.

8.4 Calibration

The calibration option allows fine tuning of the pellet power. If the 

pellet power 5 is too high and pellet power 4 insufficient, set the 

”Auger” to minus 1 or 2 if the stove is operating at maximum power or 

to plus 1 or 2 to if the set pellet power is 4. This procedure results in 

the pellet power between 4 and 5. If you increase the “Auger” 

calibration, set the “Fun” calibration to the same degree.

8.5 Remote controler

Button 1 activates shutting down.

Button 2 activates ignition.

Button 3 or 4 increases or decreases the pellet power.

When the stove is automatic mode, the remote 

controller is not operational.  

8.6 Pellet manual loading

This option is to be activated when the stove is put into operation for 

the first time or when there are pellets in the hopper and auger needs 

to be loaded. The loading automatically stops after 600 seconds or at 

any time during operation by pressing the button P1.

To activate this function it is necessary that the furnace is  off.

11