Users guide shoplifting protection 24501 sp-1 kt7060 ketec, inc abcoffice www.Abcoffice.Com 1-800-658-8788.
Sp-1 users guide index parts list …………………………….1 assembly instructions……………… 2 positioning the system ……………. 3 tagging guidelines …………………4 removing hard tag……………….. 7 detection area ……………………... 9 alarm handling …………………….. 10 troubleshooting ……………………. 11 warranty…………………………….. Back cover abcoffice www....
5’ rubber molding & double sided tape baseplate sp-1 antenna with wire power supply with 10’ of cord cap nuts and washers remove all contents from packaging. Compare products with the example. If you are missing any parts please contact your supplier immediately. The carton should contain: parts lis...
1. Locate the baseplate, cap nuts and washers. 2. Place the antenna on top of the baseplate, aligning the holes in the antenna base with the studs on the baseplate. Make sure that the power supply wire is in the channels of the antenna base and is not crushed between the antenna base and the basepla...
Positioning the system 6. Position the system a minimum of 18” (inches) from the doorframe and on the side closest to the door handle. 7. Cut the rubber molding to the length that will allow it to cover the wire from the wall to the system. You must cover the wire, using a metal pancake molding if t...
1. The tag should be visible to the customer. 2. Tag uniformly, it speeds up removal. 3. Tag near a price label. It assists in the removal. 4. Place the tag as high as possible when tagging silks & light or stretchy fabrics. 5. Except for leather goods we d not recommend locating the tag at the seam...
Tagging guidelines dresses pants one piece bathing suit bikini bathing suit 5 1-800-658-8788 www.Abcoffice.Com abcoffice.
Tagging guidelines shoes tennis shoes belts purses 6 1-800-658-8788 www.Abcoffice.Com abcoffice.
7 3. Remove the pin and hard tag from the detacher and store for future use. 2. Remove the pin by holding the hard tag to the detacher and pulling straight up on the pin or garment. 1. Place the hard tag into the detacher with the pin facing up. Removing hard tag 1-800-658-8788 www.Abcoffice.Com abc...
Removing hard tag it is possible for the locking mechanism to become jammed when the pin is pulled extremely hard. It is possible to un-jam the pin so that you will be able to remove it when needed. The first step is to place the hard tag into the detacher then press on the head of the pin. This sho...
3 foot no tag zone 4-1/2 foot no tag zone 4-1/2 foot no tag zone the sp-1 system will detect hard tags within 4 feet to each side and 3 feet in front of and back of the antenna. We recommend that you keep all merchandise with hard tags a minimum of 4-1/2 feet from the sides of the system and 3 feet ...
Alarm handling there are three reasons for the system to alarm: 1. The real alarm: the occurrence of a shoplifting attempt. 2. The accidental alarm: a) personnel neglected to remove a tag at the point of sale. B) an electronic security access card has been carried into the store by a customer, or c)...
Troubleshooting if a problem develops with the sp-1 system it is usually caused by common occurrences. The following is a basic troubleshooting guide to be used prior to contacting your supplier if the need arises. Do not make any internal adjustments to the system prior to contacting your supplier....
