ABC Office Educator Operation Manual - 1-7  Warranty

you spot a spliced roll in advance, you can put it on the top supply roll mandrel in order 

to see the splice coming more easily avoid putting material under the splice.  Or you 

could put it on the bottom roll if you plan to be laminating items that will never be seen 

from the back side. 

1-7  Warranty 

This laminator is guaranteed against defects in material and workmanship for a period of 

two years  after date of shipment.  Defective parts will be replaced without cost within the 

warranty period, provided the laminator has not been abused, altered or operated contrary 

to instructions.  Ledco, Inc. Shall not be liable for any alterations or repairs except those 

made with its written consent. 

This obligation under warranty shall not extend to the following: 

• 

The adjustment or replacement of parts which are the normal responsibility of the 

owner.  For example, rubber rollers, heat shoe coatings, scratched or chipped paint, 

loose fasteners (screws, nuts, etc.), or other items that show wear under normal use;  

i.e. “normal wear parts”. 

• 

Normal operating adjustments to heat, speed, tension, etc. 

• 

Parts that are not manufactured by Ledco, Inc.  If the individual manufacture warrants 

these items, their warranty is, in turn, passed on to the original purchaser of the 

laminator.  Ledco, Inc. does not incur any obligation or liability as  a result of the 

warranties that are the sole responsibility of the appropriate individual manufacturer. 

Any laminator that provides defective during the warranty period may be returned to 

Ledco, Inc. unless it is decided that the necessary repairs can be made during a service 

call.  Notice of the defect should be submitted in writing or by phone to Ledco before any 

steps are taken to repair or return the machine.  Phone: 716-367-2392  Fax: 716-367-2978 

If the machine is returned, the following should accompany it. 

• 

Customer name, address and phone number. 

• 

Written particulars regarding the malfunction. 

• 

Date of installation. 

• 

Serial number of machine. 

• 

All returns must have a return authorization number on the outside 

of the shipping container.  Send all returned equipment freight 

PREPAID to:  Ledco, Inc., 4265 North Main Street, Hemlock, NY 14466: 

Tel: 716-367-2392  Fax: 716-367-2978  Email: 

ledco@ledcoin.com

If your machine needs servicing after the warranty has expired, please contact your 

dealer.  Ledco, Inc. does offer technical support if your dealer is unable to assist. 

This warranty is expressly in lieu of all other warranties expressed or implied, including 

the warranties of Merchantability and Fitness For Use and of all other obligation or