Abee V10 Manual - page 13
11
V10 Car Recorder Manual
v. Menu function
In general mode, press the
key to choose
Menu
, to enter the menu screen.
1.
Time Setup
:
Set up the current time
In the menu screen: Select
Time Setup.
Use
key to set up the date and
time then press
key to choose OK. After setup has been completed it will
automatically return to the previous screen.
2.
Time Stamp
:
to set up the recording date & time on video
In the menu screen, select
Time stamp, then select On or Off.
3.
LCD Setting
:
to set up whether to turn on the screen while recording
In the menu screen, select
LCD Setting, then select on, Off in 30 Seconds, Off in 3
minutes or Off.
4.
Audio Recording: to set up whether to record sound in to video
In the menu screen, select
Audio Recording,
then select
On or Off.
5.
Sound Effect: to set up whether to turn on the keypad tone
In the menu screen, select
Sound Effect, then select On or Off.
6.
Auto Recording: to set up auto turn-on and record when engine is started.
In the menu screen, select
Auto Recording, then select On or Off.
7.
Collision Detection: in recording mode, when accident or impact occurs the
device will automatically lock the current file. The sensitivity of collision can be
set
, collision information will be shown through ADR Player.
In the menu screen
, select Collision Detection,
then select
High Sensitivity、Normal
Sensitivity、Low Sensitivity or Off.
8.
Frequency Setting
:
to set the display frequency to avoid the images flashing
In the menu screen
, select Frequency setting, then select 50Hz or 60Hz.
9.
Shutdown Delay: the device will keep recording for a short footage before
shutdown.
In menu screen, select S
hutdown Delay, then
select
S
hutdown in 10 Sec or Off.
10.
Language: to set up the language for operational interface.
In menu screen, select
Language,
then select
Traditional Chinese(繁體中文) ,
Simplify Chinese(简体中文) or English(English) .
11.
Format: Format memory card (Micro SD).
In the menu screen, select
Format, then select Cancel or OK. Select OK
to format
your memory card. Please backup important data before formatting your card.
12.
Default Setting: Reset all the setting to factory default.
In the menu screen, select
Default Setting, select No or Yes. Select Yes
to reset all
the setting to the factory defaults.
E
nglis
h