Abilia Micro Rolltalk User Manual - page 22
22
Installation of speech synthesis
These instructions only apply if you want to install speech synthesis on Micro
Rolltalk. Rolltalk Designer and Micro Rolltalk software must be installed first
“Micro Rolltalk Voices”
This USB stick contains speech synthesis programs for use in Micro Rolltalk.
1. Insert the USB stick for installing Micro Rolltalk.
When the AutoRun window
appears, select Open Folder to view files or open the Start-menu, click on
Computer, select the drive with the USB stick.
Open the folder to install and
double click on setup.exe
2. Select the relevant language from the first screen.
3.
Click “OK” and then follow the instructions on the screen.
4. Select the voice (e.g. Heather
) you wish to use, and then click “Next”.
5. Follow the instructions on the screen. It may take a while for the speech
synthesis program to install.
6. Once the installation is compl
ete, click “Finish”.
7. Use the USB cable to connect Micro Rolltalk to the PC and check that it has
connected status
8. Open Rolltalk Designer
9. Select Tools
|
Technical
|
Micro Rolltalk
10. Ensure that the Micro Rolltalk is connected,
select Reinstall.
11. Select the speech synthesis
under optional program to be
installed to the Micro Rolltalk.
12. Select Start