Abilica Abilica Spin Assembly And User's Manual - page 5
5
FIG.3
FIG.4
FIG.3:
Slide the Handlebar Post (pt.17) into
the handlebar post housing on the main
frame. You will have to slacken the
knurled
section
of
the
Spring
Adjustment Knob (pt.7) and pull the
knob back and then select and align
holes for the desired height. Release
the knob and retighten the knurled
portion.
Then fix the Handlebar (pt.18) with four
sets of Ø8 the Spring Washer (pt.19)
and M8*15 the Bolt (pt.20).
FIG.4:
The Pedals (pt.9 L & pt.1 R) are
marked "L" and "R" - Left and Right.
Connect them to their appropriate
crank arms. The right crank arm is on
the right- hand side of the cycle as you
sit on it.
Note that the Right pedal should be
threaded on clockwise and the Left
pedal anticlockwise.