1. DL manuals
  2. Abit
  3. Motherboard
  4. IX38 QuadGT
  5. User Manual

Abit IX38 QuadGT User Manual

Manual is about: Socket 775

Summary of IX38 QuadGT

  • Page 1

    Hardware setup bios setup driver & utility multilingual qig appendix ix38 quadgt motherboard socket 775 user’s manual about this manual: this user’s manual contains all the information you may need for setting up this motherboard. To read the user’s manual of pdf format (readable by adobe reader ), ...

  • Page 2

    Ii ix38 quadgt copyright and warranty notice the information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either...

  • Page 3: Hardware Setup

    Hardware setup bios setup driver & utility multilingual qig appendix ix38 quadgt iii contents 1. Hardware setup ............................................................... 1-1 1.1 specifications............................................................................... 1-1 1.2 motherboard la...

  • Page 4

    Iv ix38 quadgt 3. Driver & utility ................................................................. 3-1 3.1 cd-rom autorun ...................................................................... 3-1 3.2 q-install ...................................................................................... ...

  • Page 5: Hardware Setup

    Hardware setup ix38 quadgt 1-1 1. Hardware setup 1.1 specifications cpu • designed for intel latest 45nm processor with fsb 1333mhz. • support intel processor of: core 2 extreme edition / core 2 quad / core 2 duo, & pentium extreme edition / pentium dual core / pentium d / pentium 4. Chipset • intel...

  • Page 6: 1.2 Motherboard Layout

    1-2 ix38 quadgt 1.2 motherboard layout.

  • Page 7: Hardware Setup

    Hardware setup ix38 quadgt 1-3 1.3 choosing a computer chassis • choose a chassis big enough to install this motherboard. • as some features for this motherboard are implemented by cabling connectors on the motherboard to indicators and switches or buttons on the chassis, make sure your chassis supp...

  • Page 8: 1.5 Checking Jumper Settings

    1-4 ix38 quadgt 1.5 checking jumper settings • for a 2-pin jumper, plug the jumper cap on both pins will make it close (short). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at open position. Short open open • for 3-pin jumper, pin 1~2 or pin 2~3 can be shor...

  • Page 9: Hardware Setup

    Hardware setup ix38 quadgt 1-5 cmos backup battery: an onboard battery saves the cmos memory to keep the bios information stays on even after disconnected your system with power source. Nevertheless, this backup battery exhausts after some five years. Once the error message like “cmos battery has fa...

  • Page 10

    1-6 ix38 quadgt 1.6 connecting chassis components 1.6.1 power connectors these connectors provide the connection from an atx12v power supply. As the plugs from the power supply fit in only one orientation, find the correct one and push firmly down into these foolproof-designed connectors. For a full...

  • Page 11: Hardware Setup

    Hardware setup ix38 quadgt 1-7 1.6.2 front panel switches & indicators headers this header is used for connecting switches and led indicators on the chassis front panel. Watch the power led pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity f...

  • Page 12

    1-8 ix38 quadgt 1.6.3 fan power connectors these connectors each provide power to the cooling fans installed in your system. • cpufan1: cpu fan power connector • sysfan1: system fan power connector • auxfan1~4: auxiliary fan power connector ※ these fan connectors are not jumpers. Do not place jumper...

  • Page 13: Hardware Setup

    Hardware setup ix38 quadgt 1-9 1.6.4 extra fan set installation ※ proceed with extremely care while installing the extra fan set. Do not damage the motherboard components. As shown in this photo, it is possible to attach one mini 40mm(w) x 40mm (h) x 10mm(d) cooling fan (not included in this motherb...

  • Page 14: 1.7 Installing Hardware

    1-10 ix38 quadgt 1.7 installing hardware ※ do not scratch the motherboard when installing hardware. An accidental scratch of a tiny surface-mount component may seriously damage the motherboard. ※ in order to protect the contact pins, please pay attention to these notices: 1. A maximum 20 cycles of c...

  • Page 15: Hardware Setup

    Hardware setup ix38 quadgt 1-11 5. Use your left hand to hold the load plate, and use your right thumb to peel the cap off. The cap plays an important role in protecting contact pins. In order to prevent bent pin, put on the cap after operation or testing. 6. Lower the plate onto the cpu package. En...

  • Page 16

    1-12 ix38 quadgt 1.7.2 ddr2 memory slots to reach the performance of dual channel ddr2, the following rules must be obeyed: • for a 2-dimm dual-channel installation: populate dimm modules of the same type and size on slots [dimm1]+[dimm3], or slots [dimm2]+[dimm4]. • for a 4-dimm dual-channel instal...

  • Page 17: Hardware Setup

    Hardware setup ix38 quadgt 1-13 1.7.3 pci express x16 add-on slots (install graphics card) this motherboard provides dual pci express x16 slots for one or two graphics cards installation of graphics cards that comply with pci express specifications. One pci express graphics card installation: insert...

  • Page 18

    1-14 ix38 quadgt 1.8 connecting peripheral devices 1.8.1 floppy and ide disk drive connectors the fdc1 connector connects up to two floppy drives with a 34-wire, 2-connector floppy cable. Connect the single end at the longer length of ribbon cable to the fdc1 on the board, the two connectors on the ...

  • Page 19: Hardware Setup

    Hardware setup ix38 quadgt 1-15 1.8.2 serial ata connectors each sata connector serves as one single channel to connect one sata device by sata cable. To connect sata device: 1. Attach either end of the signal cable to the sata connector on motherboard. Attach the other end to the sata device. 2. At...

  • Page 20

    1-16 ix38 quadgt 1.8.3 additional usb 2.0 port headers each header supports 2x additional usb 2.0 ports by connecting bracket or cable to the rear i/o panel or the front-mounted usb ports of your chassis. Pin pin assignment pin pin assignment 1 5vdual 2 5vdual 3 data0 - 4 data1 - 5 data0 + 6 data1 +...

  • Page 21: Hardware Setup

    Hardware setup ix38 quadgt 1-17 1.8.5 internal audio connector this connector connects to the audio output of internal cd-rom drive or add-on card. 1.8.6 front panel audio connection header this header provides the front panel connection for hd (high definition) audio, yet for ac’97 audio codec conn...

  • Page 22

    1-18 ix38 quadgt 1.8.7 s/pdif output connection header this header provides the s/pdif output connection to your add-on hdmi vga card. Pin pin assignment 1 vcc (5v) 2 x 3 s/pdif out 4 ground 1.8.8 pci and pci express x1 slots install pci express x1 cards into slot “pcie1”. Install pci express x4 car...

  • Page 23: Hardware Setup

    Hardware setup ix38 quadgt 1-19 1.8.9 guru panel connection header this header is reserved for connecting abit’s exclusive guru panel. For more information, please refer to the included guru panel installation guide..

  • Page 24

    1-20 ix38 quadgt 1.9 onboard indicators and buttons 1.9.1 post code displayer this is an led device to display the “post” code, the acronym for power on self test. The computer will execute the post action whenever you power on the computer. The post process is controlled by the bios. It is used to ...

  • Page 25: Hardware Setup

    Hardware setup ix38 quadgt 1-21 1.9.2 power source indicators • 3vsb: this led lights up when the power supply is connected with power source. • vcc: this led lights up when the system power is on. 1.9.3 onboard buttons • pwrsw1: push this button to power on the system. • reset1: push this button to...

  • Page 26

    1-22 ix38 quadgt 1.10 connecting rear panel i/o devices the rear i/o part of this motherboard provides the following i/o ports: • mouse: connects to ps/2 mouse. • keyboard: connects to ps/2 keyboard. • ez-ccmos1: this button enables clearing the cmos memory without uncovering the system chassis. To ...

  • Page 27: Bios Setup

    Bios setup ix38 quadgt 2-1 2. Bios setup this motherboard provides a programmable eeprom so that you can update the bios utility. The bios (basic input/output system) is a program that deals with the basic level of communication between processor and peripherals. Use the bios setup program only when...

  • Page 28: 2.1 Μguru

    2-2 ix38 quadgt 2.1 μguru ™ utility there are two setup menus in this μguru utility. You may switch between these two by clicking the left or right arrow key on keyboard: 2.1.1 oc guru μguru utility v1.01c oc guru intel(r) core(tm)2 cpu 6320 @ 1.86ghz item help ► frequency : 1904mhz cpu operating sp...

  • Page 29: Bios Setup

    Bios setup ix38 quadgt 2-3 - multiplier factor this item displays the multiplier factor for the cpu you installed. - estimated new cpu clock this item displays an estimated cpu processor speed. - ddr2 speed (cpu : ddr2) this item determines the dram frequency. Voltages control this option allows you...

  • Page 30

    2-4 ix38 quadgt - ichio 1.5v voltage this item selects the i/o voltage for ich (sb). - ddr2 ca reference voltage this item selects the reference voltage for dram memory modules. - cpu gtlref 0&2 / cpu gtlref 1&3 these items select the percentage ratio of cpu vtt voltage for each group of the cpu gtl...

  • Page 31: Bios Setup

    Bios setup ix38 quadgt 2-5 abit eq beep control this item controls if the beeper sounds or not when any warning event occurred. Temperature monitoring click key to enter its submenu: μguru utility v1.01c abit eq temperature monitoring reading shutdown enable shutdown temp. Beep enable beep temp. (*)...

  • Page 32

    2-6 ix38 quadgt voltage monitoring click key to enter its submenu: μguru utility v1.01c abit eq voltage monitoring reading shutdown enable beep enable high limit low limit (*)cpu core voltage 1.30 v (*) (*) 1.55 v 0.00 v (*)ddr2 voltage 1.85 v ( ) (*) 2.22 v 1.48 v (*)ddr2 vtt voltage 0.90 v ( ) (*)...

  • Page 33: Bios Setup

    Bios setup ix38 quadgt 2-7 cpu/sys/aux1 ~ aux4 fan speed these items display the speed of the fans connected to cpu, sys, and aux1~aux4 fan connectors. - shutdown enable use key to enable system shutdown function. Once the system has detected that the fan speed is lower than the low limit value, sys...

  • Page 34

    2-8 ix38 quadgt cpu/sys/aux1 faneq control when set to [enabled], these items control the cpu, sys, and/or aux1 fan speed by the following setting combinations. - reference temperature this item selects the reference point for taking temperature among the available options of cpu, sys, and pwm tempe...

  • Page 35: Bios Setup

    Bios setup ix38 quadgt 2-9 2.2 standard cmos features phoenix – awardbios cmos setup utility standard cmos features date (mm:dd:yy) thu, sep 20 2007 item help time (hh:mm:ss) 12 : 34 : 56 ► sata channel 1 none ► sata channel 3 none ► sata channel 2 none ► sata channel 4 none ► sata channel 5 none ► ...

  • Page 36

    2-10 ix38 quadgt hdd auto-detection this item allows you to detect the parameters of hard drives by pressing key. The parameters will be shown on the screen automatically. Sata channel 1 ~ sata channel 6 when set to [auto], the bios will automatically check what kind of sata hard drive you are using...

  • Page 37: Bios Setup

    Bios setup ix38 quadgt 2-11 [all, but keyboard]: the system-boot will stop for all errors except a keyboard error. [all, but diskette]: the system-boot will stop for all errors except a diskette error. [all, but disk/key]: the system-boot will stop for all errors except a diskette or keyboard error....

  • Page 38

    2-12 ix38 quadgt cpu feature click key to enter its submenu: phoenix – awardbios cmos setup utility cpu feature thermal control enabled item help limit cpuid maxval disabled c1e function auto execute disable bit enabled virtualization technology enabled eist function enabled ‚€:move enter:select +...

  • Page 39: Bios Setup

    Bios setup ix38 quadgt 2-13 back to advanced bios features setup menu hard disk boot priority this item selects the hard disks booting priority. By pressing key, you can enter its submenu where the hard disks detected can be selected for the booting sequence to boot up system. This item functions on...

  • Page 40

    2-14 ix38 quadgt mps version ctrl for os this item specifies which version of mps (multi-processor specification) this motherboard will use. Leave this item at its default setting. Report no fdd for os when set to [yes], this item allows you to run some older operating system without floppy disk dri...

  • Page 41: Bios Setup

    Bios setup ix38 quadgt 2-15 voltage interface, and module banks. The following items will be available to make adjustments by selecting option [manual]. - cas latency time (tcl) - ras# to cas# dealay (trcd) - ras# precharge (trp) - precharge delay (tras) - refresh cycle time (trfc) - write recovery ...

  • Page 42: 2.5 Integrated Peripherals

    2-16 ix38 quadgt 2.5 integrated peripherals phoenix – awardbios cmos setup utility integrated peripherals ► onchip sata device press enter item help ► onchip pci device press enter ► superio device press enter ► onboard pci device press enter ‚€:move enter:select +/-/pu/pd:value f10:save esc:exit ...

  • Page 43: Bios Setup

    Bios setup ix38 quadgt 2-17 [raid]: the on-chip serial ata served as raid mode. [ahci]: the on-chip serial ata served as ahci (advanced host controller interface) mode for advanced performance and usability. Onchip pci device click key to enter its submenu: phoenix – awardbios cmos setup utility onc...

  • Page 44

    2-18 ix38 quadgt superio device click key to enter its submenu: phoenix – awardbios cmos setup utility superio device floppy disk controller enabled item help ‚€:move enter:select +/-/pu/pd:value f10:save esc:exit f1:general help f5: previous values f6: fail-safe defaults f7: optimized defaults fl...

  • Page 45: Bios Setup

    Bios setup ix38 quadgt 2-19 network controller this option enables or disables the lan controller. - invoke boot agent this item allows you to use the boot rom (instead of a disk drive) to boot up the system and access the local area network directly. Storage controller this option enables or disabl...

  • Page 46

    2-20 ix38 quadgt power button function this item selects the method of powering off your system: [delay 4 sec.]: pushing the power button for more than 4 seconds will power off the system. This will prevent the system from powering off in case you accidentally hit or pushed the power button. [instan...

  • Page 47: Bios Setup

    Bios setup ix38 quadgt 2-21 [keyboard 98]: use the power-on button on the “keyboard 98” compatible keyboard to power on the system. - kb power on password this item sets the password required in order to power on your computer. ※ do not forget your password, or you will have to clear the cmos and re...

  • Page 48: 2.8 Load Fail-Safe Defaults

    2-22 ix38 quadgt - irq resources click key to enter its submenu: this item sets each system interrupt to either [pci device] or [reserved]. Pci/vga palette snoop this item determines whether the mpeg isa/vesa vga cards can work with pci/vga or not. [enabled]: mpeg isa/vesa vga cards work with pci/vg...

  • Page 49: Driver & Utility

    Driver & utility ix38 quadgt 3-1 3. Driver & utility the “driver-&-utility cd” that came packed with this motherboard contains drivers, utilities and software applications required for its basic and advanced features. 3.1 cd-rom autorun to run the cd-rom automatically: 1. Place the “driver-&-utility...

  • Page 50: 3.2 Q-Install

    3-2 ix38 quadgt 3.2 q-install this button allows you to install all the drivers for this motherboard at one stroke. To install all the drivers for this motherboard at one stroke: 1. Click on the [drivers] tab in the installation menu screen. 2. Click the [q-install] item. The installation screen app...

  • Page 51: Driver & Utility

    Driver & utility ix38 quadgt 3-3 3.4 intel matrix storage manager this driver provides functionality for the on-chip sata controller. ※ this driver installation is necessary for connectors “sata1~sata6” only when after having enabled the raid function in the bios setup menu. The path to enable the r...

  • Page 52: 3.6 Lan Driver

    3-4 ix38 quadgt 5. Click the [audio i/o] tab. 6. Click the pull down menu to select the channel configuration. 7. Click [ok] button to apply the audio i/o settings and exit. 3.6 lan driver to install this program: 1. Click on the [drivers] tab in the installation menu screen. 2. Click the [lan drive...

  • Page 53: Driver & Utility

    Driver & utility ix38 quadgt 3-5 3.7 jmicron sata driver this driver provides functionality for the onboard sata raid controller. ※ this driver installation is necessary for the devices connected through connectors “esata1” or “ide1”. To install this program: 1. Click on the [drivers] tab in the ins...

  • Page 54: 3.9 Abit Μguru

    3-6 ix38 quadgt 3.9 abit μguru the μguru utility combined with the optional guru panel allows you to access and select system performance of your system while playing games, listening music, browsing internet or office applications in full screen with no need to stop or close the running application...

  • Page 55: Driver & Utility

    Driver & utility ix38 quadgt 3-7 3.10 acrobat reader 8.0 to install this utility: 1. Click on the [utility] tab in the installation menu screen. 2. Click the [acrobat reader 8.0] item. 3. Follow the prompts on the screen to complete installation. ※ for windows xp 64-bit and windows 2003 32-bit/64-bi...

  • Page 56

    3-8 ix38 quadgt 3.11 sata raid driver (for windows vista) the raid driver needed when installing windows vista operating system is located at the following path of your cd-rom drive after placing the “driver-&-utility cd” into it: for a raid configuration connected among “sata1 ~ sata6” connectors: ...

  • Page 57: Multilingual Qig

    Multilingual qig ix38 quadgt 4-1 4. Multilingual quick installation guide 4.1 français//guide d'installation rapide ce “guide d’installation rapide ” contient seulement l information de base dont vous pouvez avoir besoin lors de l’installation de votre carte mère abit. Pour des opérations plus avanc...

  • Page 58

    4-2 ix38 quadgt 4.2 deutsch//kurze installationsanleitung diese “kurze installationsanleitung” enthält nur die grundlegenden hardwareinformationen, die sie zur installation ihres abit-motherboards benötigen. Details finden sie im ausführlichen handbuch. Vorsichtsmaßnahmen beim einrichten der hardwar...

  • Page 59: Multilingual Qig

    Multilingual qig ix38 quadgt 4-3 4.3 italiano//guida all’installazione rapida questa “guida all’installazione rapida” contiene solamente le informazioni di base sull’hardware necessarie all’installazione della scheda madre abit. Fare riferimento alla versione completa della guida per eseguire le ope...

  • Page 60

    4-4 ix38 quadgt 4.4 español//guía rápida de instalación esta “guía de instalación rápida” contiene solamente la información básica sobre el hardware que puede necesitar durante la instalación de la placa base abit. Para conocer el funcionamiento avanzado, es necesario consultar la versión completa. ...

  • Page 61: Multilingual Qig

    Multilingual qig ix38 quadgt 4-5 4.5 português//guia de instalação rápida este “guia de instalação rápida” contém apenas informação essencial sobre o hardware e necessária à instalação da sua placa principal abit. Para mais informações, terá de consultar a versão integral deste guia. Normas de segur...

  • Page 62

    4-6 ix38 quadgt 4.6 Русский//Краткое руководство по установке В “Кратком руководстве по установке” содержится только основная информация о техническом обеспечении, которая вам может понадобиться при установке материнской платы abit. Описание дополнительных операций вы найдете в полной версии руковод...

  • Page 63: Multilingual Qig

    Multilingual qig ix38 quadgt 4-7 4.7 eesti//kiirpaigaldusjuhend käesolev “kiirpaigaldusjuhend” sisaldab ainult abit-emaplaadi paigaldamiseks vajalikku riistvaraalast põhiteavet. Edasijõudnud kasutamiseks tuleb teil ikkagi pöörduda täisversiooni poole. Ettevaatusabinõud riistvara paigaldamisel • enne...

  • Page 64

    4-8 ix38 quadgt 4.8 latviski//Ātrās instalēšanas instrukcija Šī “Ātrās instalēšanas instrukcija” ietver tikai pamata norādes iekārtai, kas nepieciešamas, instalējot abit mātesplati. Pilnīgākai darbībai nepieciešams iegūt instrukcijas paplašināto variantu. Piesardzības pasākumi iekārtas uzstādīšanā •...

  • Page 65: Multilingual Qig

    Multilingual qig ix38 quadgt 4-9 4.9 lietuvių//trumpas instaliavimo vadovas Šiame “trumpame instaliavimo vadove” pateikta tik esminė informacija apie techninę įrangą, kurios jums gali prireikti instaliuojant pagrindinę plokštę abit. Papildomų operacijų aprašymą rasite pilnoje vadovo versijoje. Atsar...

  • Page 66

    4-10 ix38 quadgt 4.10 polski//instrukcja szybkiej instalacji ta “instrukcja szybkiej instalacji” zawiera tylko podstawowe informacje dotyczące sprzętu, wymagane podczas instalacji płyty głównej abit. Przy zaawansowanych operacjach, niezbędne będzie skorzystanie z kompletnej wersji instrukcji. Środki...

  • Page 67: Multilingual Qig

    Multilingual qig ix38 quadgt 4-11 4.11 magyar//gyorstelepítési útmutató ez a “gyorstelepítési útmutató” csak azt az alapvető hardver információt tartalmazza, amely az abit alaplap telepítéséhez szükséges. Az előrehaladott üzemeltetéshez, továbbra is a teljes útmutatót kell használnia. Hardver beállí...

  • Page 68

    4-12 ix38 quadgt 4.12 türkçe//hızlı kurulum kılavuzu bu “hızlı kurulum kılavuzu”, abit anakartınızı takmanızda gerekebilecek sadece temel donanım bilgisini içermektedir. İleri işlemler için daha geniş olan tam versiyonuna başvurmanız gerekecektir. Donanım kurmada alınacak Önlemler • anakartı takmada...

  • Page 69: Multilingual Qig

    Multilingual qig ix38 quadgt 4-13 4.13 ﺔﻴﺑﺮﻌﻟا ﺔﻐﻠﻟا // ﻊﻳﺮﺴﻟا ﺐﻴآﺮﺘﻟا ﻞﻴﻟد.

  • Page 70: 4.14

    4-14 ix38 quadgt 4.14 ﯽﺳرﺎﻓ // ﻊﻳﺮﺳ ﺐﺼﻧ ﯼﺎﻤﻨهار.

  • Page 71: Multilingual Qig

    Multilingual qig ix38 quadgt 4-15 4.15 日本語//クイックインストールガイド この「クイックインストールガイド」には、abit マ ザーボードを取り付けるときに必要となるハードウ ェアの基本情報のみが含まれています。詳細な操作 については、その完全版を参照してください。 ハードウェアのセットアップに関する注意事項 • ボードを取り付けたり設定を変更するときは、事前に 電源装置をオフにし、ac コンセントからプラグを必 ず抜いてください。 • 静電気防止バッグからボードを取り外す前に、静電気 安全リストストラップを着用して、正しくアースして ください。 • ...

  • Page 72

    4-16 ix38 quadgt 4.16 한국어//빠른설치가이드 본 “빠른설치가이드”는빅빔 abit 메인보드 설치에 필요한중요한하드웨어정보만을 포함하고 있습니다. 보다상세한정보및과정은 사용자 설명서를참고하시기바랍니다. 하드웨어 설치시주의사항 • 메인보드 설치 또는 설정을 변경하시기 전에는 항상 전 원을 끄고, ac 콘센트를 제거하시기 바랍니다 . • 정전기 방지 비닐에서 메인보드를 빼 낼때는 정전기 안전 손목 접지대를 착용하고 메인보드의 가장 자리를 잡으시기 바랍니다. • 컨넥터나 ic 류는 만지지 마십시오 • 메인보드를 정전기가 일...

  • Page 73: Multilingual Qig

    Multilingual qig ix38 quadgt 4-17 4.17 bahasa malaysia//panduan pemasangan ringkas “panduan pemasangan ringkas” ini hanya mengandungi maklumat perkakasan asas yang anda mungkin perlu semasa memasang papan induk abit anda. Untuk pengendalian lanjutan, anda perlu rujuk ke versi lengkapnya. Langkah ber...

  • Page 74

    4-18 ix38 quadgt 4.18 ไทย//คู่มือการติดตั้งอย่างย่อ ข้อมูลทางเทคนิคของอุปกรณ์ที่ปรากฎใน “คู่มือการ ติดตั้งอย่างย่อ”นี้ เป็นเพียงข้อมูลพื้นฐานที่จำเป็นใน การติดตั้งแผงวงจรหลัก abit ของคุณเท่านั้น กรุณา อ่านข้อมูลในการติดตั้งและใช้งานในระดับสูงขึ้นจาก คู่มือฉบับเต็มที่แนบมาด้วยเพื่อการติดตั้งและใช้งาน...

  • Page 75: Multilingual Qig

    Multilingual qig ix38 quadgt 4-19 4.19 繁體中文 4.19.1 規格 處理器 • 為 intel 最新 45nm 處理器設計，支援 1333mhz 前端匯流排 • 支援 intel 處理器：core 2 extreme edition / core 2 quad / core 2 duo 以及 pentium extreme edition / pentium dual core / pentium d / pentium 晶片組 • intel x38 / ich9r 記憶體 • 4 條 240 針腳 dimm 插槽支援最大 8gb 記憶體容量 • 支援...

  • Page 76

    4-20 ix38 quadgt 4.19.2 快速安裝略說 本「快速安裝略說」僅包含安裝 abit 主機板時所需的 基本硬體資訊。詳細的操作方式，仍請參閱其完整的 手冊版本。 硬體安裝注意事項 • 安裝機板或變換任何設定之前，請先關閉電源並拔 掉電源插頭。 • 從抗靜電袋中取出機板前，請先戴上靜電安全手 環，以確保自己已確實接地。 • 請握住機板的邊緣。請勿接觸機板上的任何元件。 • 請勿接觸模組及 ic 晶片 • 請將機板置於已接地的抗靜電平面上，或置於隨附 的抗靜電袋。 將機板安裝至機殼內 本主機板的電腦機殼應符合以下條件： • 與本主機板的規格相容。 • 機殼上的指示燈及開關支援主機板...

  • Page 77: Multilingual Qig

    Multilingual qig ix38 quadgt 4-21 4.20 简体中文 4.20.1 规格 处理器 • 为 intel 最新 45nm 处理器设计，支援 1333mhz 前端总线 • 支持 intel 处理器: core 2 extreme edition / core 2 quad / core 2 duo 以及 pentium extreme edition / pentium dual core / pentium d / pentium 4 芯片组 • intel x38 / ich9r 内存 • 4 条 240 针脚 dimm 插槽支持最大 8gb 内存容量 • 支持...

  • Page 78

    4-22 ix38 quadgt 4.20.2 快速安装略说 本“快速安装略说”仅包含基本的硬件信息，供您在 安装 abit 主板时进行参考。如需了解高级操作，仍请 参阅其完整的手册版本。 硬件设置注意事项 • 在安装主板或更改任何设置前，务必关闭电源并从 交流插座上拔掉电源线。 • 从防静电袋中取出主板前，应戴上静电安全腕带以 使您正确接地。 • 用手拿着主板的边缘。不要触摸主板上的任何元 件。 • 不要触摸模块触点和 ic 芯片。 • 将主板放在接地的防静电表面上或者放在主板附带 的防静电袋中。 将主板安装到底盘上 此主板的计算机底盘应符合下列条件： • 支持此主板的外形尺寸。 • 支持主...

  • Page 79: Appendix

    Appendix ix38 quadgt 5-1 5. Appendix 5.1 post code definitions 5.1.1 award post code definitions post (hex) description cf test cmos r/w functionality c0 early chipset initialization: -disable shadow ram -disable l2 cache (socket 7 or below) -program basic chipset registers c1 detect memory -auto-de...

  • Page 80

    5-2 ix38 quadgt 26 1. If early_init_onboard_generator is not defined onboard clock generator initialization. Disable respective clock resource to empty pci & dimm slots. 2. Init onboard pwm 3. Init onboard h/w monitor devices 27 initialize int 09 buffer 29 1. Program cpu internal mtrr (p6 & pii) for...

  • Page 81: Appendix

    Appendix ix38 quadgt 5-3 76 (optional feature) enter awdflash.Exe if: -awdflash is found in floppy drive -alt+f2 is pressed 77 detect serial ports & parallel ports. 7a detect & install co-processor 7c init hdd write protect 7f switch back to text mode if full screen logo is supported -if errors occu...

  • Page 82

    5-4 ix38 quadgt 5.1.2 ac2005 post code definitions post (hex) description power on sequence 8.1. Start power on sequence 8.2. Enable atx power supply 8.3. Atx power supply ready 8.4. Ddr voltage ready 8.5. Setup pwm for cpu core voltage 8.6. Assert pwm for cpu core voltage 8.7. Check cpu core voltag...

  • Page 83: Appendix

    Appendix ix38 quadgt 5-5 5.2 troubleshooting (how to get technical support?) 5.2.1 q & a q: do i need to clear the cmos before i use a new motherboard to assemble my new computer system? A: yes, we highly recommend that you clear the cmos before installing a new motherboard. Please move the cmos jum...

  • Page 84

    5-6 ix38 quadgt q: how to get a quick response for my request on technical support? A: please carry out a simple troubleshooting before sending “technical support form”: system boot-up fails after the system had been assembled: check the motherboard’s supporting specifications first to see if all th...

  • Page 85: Appendix

    Appendix ix38 quadgt 5-7 • memory configuration: type in the memory configuration in bios setting. Example: memory timing: 2.5-3-3-7 @533mhz • graphics information: note graphics card’s brand, model and driver version • graphics card: type in the brand and model name of your graphics card. Example: ...

  • Page 86

    5-8 ix38 quadgt 5.2.2 technical support form region: e-mail: first name: last name: subject: motherboard: bios version: cpu: memory brand: memory size: memory configuration: graphics card: graphics driver version: power supply maker: power supply wattage: storage devices: optical devices: other devi...

  • Page 87: Appendix

    Appendix ix38 quadgt 5-9 5.2.3 contact information taiwan head office universal abit co., ltd. 6f, no. 323, yang guang st., neihu, taipei, 114, taiwan tel: 886-2-8751-3380 fax: 886-2-8751-3381 sales: sales@abit.Com.Tw marketing: market@abit.Com.Tw north america, south america universal abit (usa) co...

  • Page 88

    Ix38 quadgt p/n: 4310-0000-91 rev. 1.00 http://www.Abit.Com.Tw.