1. DL manuals
  2. Abit
  3. Motherboard
  4. LG-95
  5. User Manual

Abit LG-95 User Manual

Manual is about: Motherboard Socket 775 Intel Core 2 Duo / Pentium Dual-Core / Pentium D / Pentium 4 / Celeron D

Summary of LG-95

  • Page 1

    Hardware setup bios setup driver & utility multilingual qig appendix lg-95 lg-95z motherboard socket 775 intel core 2 duo* / pentium dual-core / pentium d / pentium 4 / celeron d intel 945g (945gz)* / ich7 fsb1066 (800)* ddr2 667 (533)* integrated intel gma 950 gigabit lan (10/100)* 4x sata 3.0gb/s ...

  • Page 2

    Ii lg-95/lg-95z lg-95/lg-95z user’s manual english + multilingual qig 1 st edition, december 2006 copyright and warranty notice the information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility f...

  • Page 3

    Hardware setup bios setup driver & utility multilingual qig appendix lg-95/lg-95z iii contents 1. Hardware setup ............................................................... 1-1 1.1 specifications ..............................................................................1-1 1.1.1 lg-95..........

  • Page 4

    Iv lg-95/lg-95z 5. Appendix .......................................................................... 5-1 5.1 troubleshooting (how to get technical support?) ..........................5-1 5.1.1 q & a .................................................................................5-1 5.1.2 technica...

  • Page 5

    Hardware setup lg-95/lg-95z 1-1 1. Hardware setup 1.1 specifications 1.1.1 lg-95 cpu • lga775 socket for intel core 2 duo / pentium dual-core / pentium d / pentium 4 / celeron d processor with 1066mhz fsb • supports intel hyper-threading technology chipset • intel 945g / ich7 memory • 2x 240-pin dim...

  • Page 6

    1-2 lg-95/lg-95z 1.1.2 lg-95z cpu • lga775 socket for intel pentium dual-core / pentium d / pentium 4 / celeron d processor with 800mhz fsb • supports intel hyper-threading technology chipset • intel 945gz / ich7 memory • 2x 240-pin dimm slots support up to 2gb • supports dual channel ddr2 533 un-bu...

  • Page 7

    Hardware setup lg-95/lg-95z 1-3 1.2 motherboard layout 1.2.1 lg-95.

  • Page 8

    1-4 lg-95/lg-95z 1.2.2 lg-95z.

  • Page 9

    Hardware setup lg-95/lg-95z 1-5 1.3 choosing a computer chassis the motherboard and its component layouts illustrated in this chapter were based mainly on model “lg-95”, unless specifically stated. • choose a chassis big enough to install this motherboard. • as some features for this motherboard are...

  • Page 10

    1-6 lg-95/lg-95z 1.5 checking jumper settings • for a 2-pin jumper, plug the jumper cap on both pins will make it close (short). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at open position. Short open open • for 3-pin jumper, pin 1~2 or pin 2~3 can be sho...

  • Page 11

    Hardware setup lg-95/lg-95z 1-7 cmos backup battery: an onboard battery saves the cmos memory to keep the bios information stays on even after disconnected your system with power source. Nevertheless, this backup battery exhausts after some five years. Once the error message like “cmos battery has f...

  • Page 12

    1-8 lg-95/lg-95z 1.6 connecting chassis components 1.6.1 atx power connectors these connectors provide the connection from an atx power supply. As the plugs from the power supply fit in only one orientation, find the correct one and push firmly down into these connectors. Atx 24-pin power connector:...

  • Page 13

    Hardware setup lg-95/lg-95z 1-9 1.6.2 front panel switches & indicators headers this header is used for connecting switches and led indicators on the chassis front panel. Watch the power led pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity ...

  • Page 14

    1-10 lg-95/lg-95z 1.6.3 fan power connectors these connectors each provide power to the cooling fans installed in your system. • cpu_fan: cpu fan power connector • sys_fan: system fan power connector • chs_fan: chassis fan power connector ※ these fan connectors are not jumpers. Do not place jumper c...

  • Page 15

    Hardware setup lg-95/lg-95z 1-11 1.7 installing hardware ※ do not scratch the motherboard when installing hardware. An accidentally scratch of a tiny surface-mount component may seriously damage the motherboard. ※ in order to protect the contact pins, please pay attention to these notices: 1. A maxi...

  • Page 16

    1-12 lg-95/lg-95z 5. Use your left hand to hold the load plate, and use your right thumb to peel the cap off. The cap plays an important role in protecting contact pins. In order to prevent bent pin, put on the cap after operation or testing. 6. Lower the plate onto the cpu package. Engage the load ...

  • Page 17

    Hardware setup lg-95/lg-95z 1-13 1.7.2 ddr2/ddr memory slots this motherboard supports two ddr or two ddr2 dimms. Note that ddr & ddr2 cannot be both applied at the same time. Apply either ddr or ddr2 memory modules only! ※ usually there is no hardware or bios setup required after adding or removing...

  • Page 18

    1-14 lg-95/lg-95z 1.8 connecting peripheral devices 1.8.1 floppy and ide disk drive connectors the fdc1 connector connects up to two floppy drives with a 34-wire, 2-connector floppy cable. Connect the single end at the longer length of ribbon cable to the fdc1 on the board, the two connectors on the...

  • Page 19

    Hardware setup lg-95/lg-95z 1-15 1.8.2 serial ata connectors each sata connector serves as one single channel to connect one sata device by sata cable. To connect sata device: 1. Attach either end of the signal cable to the sata connector on motherboard. Attach the other end to sata device. 2. Attac...

  • Page 20

    1-16 lg-95/lg-95z 1.8.3 additional usb 2.0 port headers each header supports 2x additional usb 2.0 ports by connecting bracket or cable to the rear i/o panel or the front-mounted usb ports of your chassis. Pin pin assignment pin pin assignment 1 vcc 2 vcc 3 data0 - 4 data1 - 5 data0 + 6 data1 + 7 gr...

  • Page 21

    Hardware setup lg-95/lg-95z 1-17 1.8.5 front panel audio connection header this header provides the connection to audio connector at front panel. Pin signal name 1 port1 l 2 gnd 3 port1 r 4 presence# 5 port2 r 6 sense1_return 7 sense_send 8 key 9 port2 l 10 sense2_return.

  • Page 22

    1-18 lg-95/lg-95z 1.8.6 pci and pci express x16, x1 slots install pci express x16 graphics card into slot “pciex16”. (for lg-95 only) install pci express x1 card into slot “pciex1”. Install pci cards into slots “pci1” and/or “pci2”..

  • Page 23

    Hardware setup lg-95/lg-95z 1-19 1.9 connecting rear panel i/o devices the rear i/o part of this motherboard provides the following i/o ports: • mouse: connects to ps/2 mouse. • keyboard: connects to ps/2 keyboard. • lpt1: connects to printer or other devices that support this communication protocol...

  • Page 24

    1-20 lg-95/lg-95z.

  • Page 25

    Bios setup lg-95/lg-95z 2-1 2. Bios setup this motherboard provides a programmable eeprom so that you can update the bios utility. The bios (basic input/output system) is a program that deals with the basic level of communication between processor and peripherals. Use the bios setup program only whe...

  • Page 26

    2-2 lg-95/lg-95z.

  • Page 27

    Driver & utility lg-95/lg-95z 3-1 3. Driver & utility the “driver & utility cd” that came packed with this motherboard contains drivers, utilities and software applications required for its basic and advanced features. Place the “driver & utility cd” into the cd-rom drive in your system. The followi...

  • Page 28

    3-2 lg-95/lg-95z.

  • Page 29

    Multilingual qig lg-95/lg-95z 4-1 4. Multilingual quick installation guide 4.1 繁體中文 4.1.1 規格（lg-95） 處理器 • 支援具備 1066mhz 前端匯流排的 intel core 2 duo / pentium dual-core / pentium d / pentium 4 / celeron d 處理 器 • 支援 intel hyper-threading 技術 晶片組 • intel 945g / ich7 記憶體 • 2 條 240 針腳 dimm 插槽，支援最大 2gb 記憶體容量 • ...

  • Page 30

    4-2 lg-95/lg-95z 4.1.2 規格（lg-95z） 處理器 • 支援具備 800mhz 前端匯流排的 intel pentium dual-core / pentium d / pentium 4 / celeron d 處理器 • 支援 intel hyper-threading 技術 晶片組 • intel 945gz / ich7 記憶體 • 2 條 240 針腳 dimm 插槽，支援最大 2gb 記憶體容量 • 支援雙通道 ddr2 533 無緩衝非 ecc 記憶 體 圖形埠 • 整合 intel graphics media accelerator 950 (gma9...

  • Page 31

    Multilingual qig lg-95/lg-95z 4-3 4.1.3 快速安裝略說 本「快速安裝略說」僅包含安裝 abit 主機板時所需的 基本硬體資訊。詳細的操作方式，仍請參閱完整的手 冊版本。 硬體安裝注意事項 • 安裝機板或變換任何設定之前，請先關閉電源並拔掉電源插 頭。 • 從抗靜電袋中取出機板前，請先戴上靜電安全手環，以確保 自己已確實接地。 • 請握住機板的邊緣。請勿接觸機板上的任何元件。 • 請勿接觸模組及 ic 晶片 • 請將機板置於已接地的抗靜電平面上，或置於隨附的抗靜電 袋。 將機板安裝至機殼內 本主機板的電腦機殼應符合以下條件： • 與本主機板的規格相容。 • ...

  • Page 32

    4-4 lg-95/lg-95z 4.2 简体中文 4.2.1 规格（lg-95） 处理器 • 支持具备 1066mhz 前端总线的 intel core 2 duo / pentium dual-core / pentium d / pentium 4 / celeron d 处理 器 • 支持 intel 超线程技术 芯片组 • intel 945g / ich7 内存 • 2 条 240 针脚 dimm 插槽支持最大 2gb 内存容量 • 支持双信道 ddr2 667 无缓冲非 ecc 内存 图形端口 • 整合 intel graphics media accelerator 950 (...

  • Page 33

    Multilingual qig lg-95/lg-95z 4-5 4.2.2 规格（lg-95z） 处理器 • 支持具备 800mhz 前端总线的 intel pentium dual-core / pentium d / pentium 4 / celeron d 处理器 • 支持 intel 超线程技术 芯片组 • intel 945gz / ich7 内存 • 2 条 240 针脚 dimm 插槽支持最大 2gb 内存容量 • 支持双信道 ddr2 533 无缓冲非 ecc 内存 图形端口 • 整合 intel graphics media accelerator 950 (gma95...

  • Page 34

    4-6 lg-95/lg-95z 4.2.3 快速安装略说 本“快速安装略说”仅包含基本的硬件信息， 供您在安装 abit 主板时进行参考。如需了解高 级操作，仍请参阅其详细指南。 硬件设置注意事项 • 在安装主板或更改任何设置前，务必关闭电源并从交流插座 上拔掉电源线。 • 从防静电袋中取出主板前，应戴上静电安全腕带以使您正确 接地。 • 用手拿着主板的边缘。不要触摸主板上的任何元件。 • 不要触摸模块触点和 ic 芯片。 • 将主板放在接地的防静电表面上或者放在主板附带的防静 电袋中。 将主板安装到底盘上 此主板的计算机底盘应符合下列条件： • 支持此主板的外形尺寸。 • 支持主板上的所有...

  • Page 35

    Appendix lg-95/lg-95z 5-1 5. Appendix 5.1 troubleshooting (how to get technical support?) 5.1.1 q & a q: do i need to clear the cmos before i use a new motherboard to assemble my new computer system? A: yes, we highly recommend that you clear the cmos before installing a new motherboard. Please move...

  • Page 36

    5-2 lg-95/lg-95z q: how to get a quick response for my request on technical support? A: please carry out a simple troubleshooting before sending “technical support form”: system boot-up fails after the system had been assembled: check the motherboard’s supporting specifications first to see if all t...

  • Page 37

    Appendix lg-95/lg-95z 5-3 • memory configuration: type in the memory configuration in bios setting. Example: memory timing: 2.5-3-3-7 @533mhz • graphics information: note graphics card’s brand, model and driver version • graphics card: type in the brand and model name of your graphics card. Example:...

  • Page 38

    5-4 lg-95/lg-95z 5.1.2 technical support form region: e-mail: first name: last name: subject: motherboard: bios version: cpu: memory brand: memory size: memory configuration: graphics card: graphics driver version: power supply maker: power supply wattage: storage devices: optical devices: other dev...

  • Page 39

    Appendix lg-95/lg-95z 5-5 5.1.3 contact information taiwan head office universal abit co., ltd. No. 323, yang guang st., neihu, taipei, 114, taiwan tel: 886-2-8751-3380 fax: 886-2-8751-3381 sales: sales@abit.Com.Tw marketing: market@abit.Com.Tw north america, south america universal abit (usa) corpo...

  • Page 40

    P/n: 4310-0000-57 rev. 1.00 http://www.Abit.Com.Tw.