ABLE Systems Ap890 User Manual

Manual is about: Hand Held Impact Printer

Summary of Ap890

  • Page 1

    Ap890 and ap892 user guide page 1 of 12 able systems limited northwich, cheshire, england www.Able-systems.Com user guide to the able systems ap890 and ap892 hand held impact printer (incorporating a191c8 firmware) contents 1 introduction ................................................................

  • Page 2

    Ap890 and ap892 user guide page 2 of 12 1 introduction this document is a user guide, written for the person connecting and using the able systems ap890 or ap892 hand held impact printer. Please read this guide carefully before making any connection. The ap890 and ap892 are part of the ap800 series ...

  • Page 3

    Ap890 and ap892 user guide page 3 of 12 2.2 sleep and waking modes the ap890 enters sleep mode automatically after a factory-set inactivity timeout period, normally approximately 30 seconds. The printer will not go to sleep with a charger connected. The printer may be woken by: § pressing the paper ...

  • Page 4

    Ap890 and ap892 user guide page 4 of 12 2.5 dot addressable graphics graphics patterns are built up as a succession of complete dot lines across the paper, rather like a tv picture. Complete dot lines must be specified at a time. The data for each dot line of graphics should be encoded as shown: for...

  • Page 5

    Ap890 and ap892 user guide page 5 of 12 3 control code tables codes from 20h to ffh are printable characters. Codes from 00h to 1fh which are not listed below are ignored. Codes forming part of an esc sequence are exceptions to these rules and may be any value. All control codes, except the ‘can’ co...

  • Page 6

    Ap890 and ap892 user guide page 6 of 12 4 battery packs and power supplies 4.1 overview of power pack options the options for powering the ap890 may be sumarised as follows: a. A battery pack, (see section ‘4.5 battery pack types and capacity’), with optional external charger (see section ‘7.3 batte...

  • Page 7

    Ap890 and ap892 user guide page 7 of 12 caution: take care not to damage the exposed metal contacts within the printer while changing the the power pack. Do not touch these metal contacts, or the gold contacts on the power pack, as this may impair operation. 4.3 battery pack handling precautions war...

  • Page 8

    Ap890 and ap892 user guide page 8 of 12 the battery pack should be capable of between 500 and 1000 complete charge and discharge cycles, though this may be reduced in very repetitive applications. If a particular battery pack appears not to be holding charge as well as expected, it may be worn out a...

  • Page 9

    Ap890 and ap892 user guide page 9 of 12 5.3 removing paper or clearing a jam if some paper remains in the printer when a new roll is required or a paper jam has occurred, you need to take special care not to pull the paper out of the printer in a reverse direction. Caution: do not pull paper in the ...

  • Page 10

    Ap890 and ap892 user guide page 10 of 12 1 4 2 6 3 5 the standard led patterns are as follows: pattern battery paper steady green charging ok flashing green/orange charging low flashing green running ok flashing orange running low flashing red low n/a no light flat, or in sleep mode n/a 6.2 alternat...

  • Page 11

    Ap890 and ap892 user guide page 11 of 12 both the ap800-bdc and ap800-9w-bdc cables feature a co-axial charger socket as follows: pin dimension (mm) function ap890 pin inner inside Ø 2.1 positive /charger (+12v ) 6 outer outside Ø 5.5 negative/common ( 0v ) 5 the ap800-bdc features a d-25 female soc...

  • Page 12

    Ap890 and ap892 user guide page 12 of 12 8 getting started you may find that you can connect up the printer to your personal computer (pc), and everything works perfectly first time. However, there are many variables, and the following information may help if you find you need some assistance. These...