- DL manuals
- Ableconn
- Adapter
- USB2E100W
- User Manual
Ableconn USB2E100W User Manual
Summary of USB2E100W
Page 1
User's manual usb 2.0 ethernet adapter.
Page 3
I safety instructions always read the safety instructions carefully keep this user’s manual for future reference keep this equipment away from humidity if any of the following situation arises, get the equipment checked by a service technician: the equipment has been exposed to moisture. The equipme...
Page 4: Table of Contents
Ii table of contents 1. Introduction ....................................................................................................... 1 features ............................................................................................................................. 1 package contents ......
Page 5: 1. Introduction
1. Introduction 1 1. Introduction the usb 2.0 ethernet adapter allows your computer instantly connect to a 10/100mbps network through simply a usb port; no hassle to open up your computer case as is required for an internal card now! It’s also an ideal usb-to-lan alternative for gaming console that ...
Page 6: System Requirements
Usb 2.0 ethernet adapter user’s manual 2 system requirements cpu: ibm compatible pentium ® -233mhz or faster pc or mac ® ram: 64 mb ram or more usb: one available usb port operating system: - windows ® 7/ window ® 8 / windows ® 8.1 / windows ® rt 8.1 - mac os ® led status led color description power...
Page 7: 2. Installation
2. Installation 3 2. Installation on windows ® 7 / windows ® 8 / windows ® 8.1 caution: do not connect the ethernet adapter to your computer before you install the provided driver. You will be instructed to do so later. 1. Insert the provided cd into your disc drive. Please locate and double-click t...
Page 8
Usb 2.0 ethernet adapter user’s manual 4 3. The next screen will show setup status as below. 4. When the installation is done, click finish . 5. Connect the end of the ethernet adapter to a free usb port of your computer. Then a pop-up message will appear in the notification area indicating the inst...
Page 9
2. Installation 5 1. Connect an ethernet cable to the ethernet port on the adapter. 2. Connect the other end of the ethernet cable to your network hub, switch or router. The “link led” should light up in green to indicate a proper physical connection between the adapter and the network. If the led d...
Page 10: On Mac Os
Usb 2.0 ethernet adapter user’s manual 6 on mac os ® 1. Insert the provided driver cd into your cd-rom drive. Double-click the cd and navigate to the directory of \driver\mac10.X . 2. In the directory of mac10.X, please double-click ax88772c…10.5~10.8 to execute the installer program. Please click a...
Page 11
2. Installation 7 5. Please see install ax88772 ethernet adapter drivers screen to click on install for the installation. 6. You may see the below prompt window, please enter your password and click ok . 7. Make sure that you want to install this driver now and the computer will be restarted once th...
Page 12
Usb 2.0 ethernet adapter user’s manual 8 once computer restart is completed, you can connect the adapter to a network device by an ethernet cable: 1. Connect an ethernet cable to the ethernet port on the adapter. 2. Connect the other end of the ethernet cable to your network hub, switch or router. T...
Page 13
2. Installation 9 verifying the driver installation on mac ® once you finish the installation of ethernet adapter, please navigate to about this mac>system profiler > hardware > usb, then you will find the driver of ax88772b. Also, you can check the connection from system preference > network.
Page 14: 3. Specifications
Usb 2.0 ethernet adapter user’s manual 10 3. Specifications items descriptions network standards ieee 802.3: 10base-t ieee 802.3u: 100base-t data transfer rates ethernet: 10mbps (half/full duplex) fast ethernet: 100mbps (half/full duplex) data bus usb 2.0 (1.1 compliant) led indicators power, link p...
Page 15: 4. Regulatory Compliance
4. Regulatory compliance 11 4. Regulatory compliance fcc conditions this equipment has been tested and found to comply with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference (2) this device must accept any interference ...