AbleNet 88405 Operating Instructions Manual - Operating Instructions
14
14
Operating Instructions
6.6. Single and Dual Switch mode
You have the option to operate your Pilot Pro with a single switch. (Call AbleNet for
information on obtaining a Switch.) In this mode your Pro scans through the menu,
pausing for a certain time at every command word waiting for confirmation. Voice
activation is still usable!!
1. Switch on: Set the slide switch on the left side of your Pilot Proto position ON and
press one of the red function keys briefly.
2. Press LR to enter the set-up mode.
3. Continue pressing l until the display shows: “repititio”
4. Press key r to move to bottom line and select a figure (1…5). Determine how
often you want your Pro to scan through the menu before it stops again.
5. Move back to top line with key r and press l to get to the next appliance type
“duration”.
6. Press key r to move back to bottom line and select with l how many seconds you
want your Pro to “linger” on every menu item
7. Move back to top line with key r. Press LR to save the settings.
Dual Switch Mode:
The Pilot is designed to seamlessly accept Dual Switch scanning without having to
re-set or re-program the unit. Simply plug in your Pilot-compatible Dual Switch (2.5mm)
and you’re done! Voice and Switch can now be used simultaneously. (Call AbleNet for
assistance.)
(Also see Section 6.9 for more information regarding Pilot’s Switch/Scan Mode.)