AbleNet QuickTalker 12 Quick Start Manual
Key Features
Step 1 - Powering QuickTalker
™
Step 2 - Select Level
Step 3 - Recording Messages
Quickstart Guide
QuickTalker
™
7
QuickTalker
™
12
QuickTalker
™
23
www.ablenetinc.com
a) Entering Record Mode
Press and hold the RECORD button on the back of device
until the red light is on, then release.
Select Level
Select LEVEL (1-5) by pressing the red button on the
front of the device.
Powering QuickTalker™
Turn the device to the back side. Insert 4 AA batteries
into the device where shown. Use the On/Off switch to
power the device.
b) Recording Messages
Press and hold the desired message location, begin
speaking after the beep, then release. Repeat for other
locations.
Tip!
Speak 6-8” from the microphone for loud, clear sound.
c) Exiting Record Mode
Press and release the RECORD button. Lights turn off.
Note: The device will automatically exit Record Mode
after 20 seconds of no activity.
Level Selection
Volume
Adjust
Buttons
Level Indicators
Recording Indicator Light
Symbols
Overlay +
Storage
Full Length
Handle
Individual
Message
Locations
Core Message
Locations
Speaker
Power On/Off
Record Button
Battery Compartment
Power On/Off
Battery Compartment
Level Selection
Level Indicators
Record Button
Recording Indicator Light