Ablerex RacPDU-115A User Manual

Summary of RacPDU-115A

  • Page 1

    0 user’s manual maintenance bypass switch for on line convertible ups 1 table of contents chapter 1. Important safety instruction.....................................................................2 chapter 2. Product introduction........................................................................

  • Page 2

    2 chapter 1. Important safety instruction • do not open the case, as there are no serviceable parts inside. Your warranty will be void. • do not try to repair the unit yourself, contact your local supplier or your warranty will be void. • save these instructions--this manual contains important instr...

  • Page 3

    4 chapter 2. Product introduction characteristics: there are two operation modes offered by the maintenance bypass switch: one is ups mode(ups available) and the other is utility mode(maintenance bypass). 1. Ups mode (ups available): when the mtbs works on the ups mode, the ups is supplied energy fr...

  • Page 4

    6 7 figure 3: mtbs front panel ○ 1 ups sockets:connect to the ups output sockets. ○ 2 input socket:connect to the wall receptacle. ○ 3 cam switch:maintenance bypass switch. ○ 4 lamps:ups and utility ○ 5 &○ 6 load input sockets:connect to the load. ○ 7 ups input socket:connect to the ups input. ○ 8 &...

  • Page 5

    8 3.4. Installation and operation the installation of the mtbs has three different methods. You may choose one of them in accordance with your need. For installation procedure, please refer to figure 3. Installation procedure: 1. Unpack the package and keep the package for future use. 2. Check if an...

  • Page 6

    10 figure 7: fixed plates 2 figure 8: convertible installation(1) 11 figure 9: convertible installation(2) figure 10: convertible installation(3).

  • Page 7

    12 figure 11: fixed plates 3 figure 12: wall mount installation 13 operation procedure: make sure that you may switch the modes according to the following procedure: 1. Ups mode=>utility mode(maintenance bypass) step 1: make sure the orange lamp is lit. If not, please refer to trouble shooting. Step...

  • Page 8

    14 chapter 4. Trouble shooting should not your mtbs operate normally, you may make some proper adjustments and replacements as indicated below. Should the mtbs still operate abnormally, please consult with your local agent immediately. Situation checked items solution no utility call a professional ...