Abocom CAS2047 Quick Installation Manual

- 1-  

BroadBand 

Router

(with 4-Port EtherSwitch)

Quick Installation Guide

M73-APO07-390 

STEP 1: CABLING 

Figure 1 

Cable/xDSL 

modem

ISP

Internet

 UTP Ethernet standard

    /cross-over cable

1-1

1-2

1-3

1-3

1-3

1-3

1-1.  Connect the power adapter to this product and power it on. 

 The LED of Power will illuminate after this step. 

1-2.  Apply the UTP cable to connect your Cable/DSL modem to this product’s Internet port.  

 The LED of Internet will illuminate after this step. 

1-3.  Use a network cable to connect your PCs’ Ethernet ports to one of this product’s LAN (1 

to 4) ports.  

 The LED of LAN port you plugged into will illuminate after this step. 

STEP 2: INSTALLING WIZARD 

Note:  To configure this device, you must have IE 4.01 or above installed. 

1.  Load the setup CD-ROM onto your computer. The auto-execution file will start 

automatically.