Cardbus 10/100 fast ethernet pc card quick installation guide.
Hardware installation 1. Hold the cardbus pc card with wide connector toward the slot and the brand label facing upward. 2. Insert the cardbus pc card and push it firmly into the bottom. (please see the following figure for reference) n otebook po we r li n k a c t 3. Connect the rj-45 port of the c...
Software installation windows 95 installation (osr2 or later) 1. Boot up computer to windows 95. Make sure the cardbus 10/100 fast ethernet pc card is well connected to the cardbus socket. 2. Click next in the update device driver wizard windows . 3. Click others locations to select a driver manuall...
Windows 98 installation 1. Boot up computer to windows 98. Make sure the cardbus 10/100 fast ethernet pc card is well connected to the cardbus socket. 2. The system will automatically detect the card and ask for the device driver. Click next to continue. 3. Select search for the best driver for your...
4. Insert the installation disk into the floppy disk drive and select floppy disk drives . Click next to start the search. 5. Click next to continue when the suitable driver for the device selected. 6. Insert the original windows 98 cd/disks to reset the system as requested. Click ok to continue. - ...
7. Follow on-screen instruction. Click finish to complete the installation. 8. Click yes to restart the system to activate the card. Windows 2000 installation 1. When the cardbus 10/100 fast ethernet pc card is well connected to the cardbus socket, the system will detect automatically the card and a...
3. Insert the installation disk into the floppy disk drive and select floppy disk drives and click next to start the search. 4. Click next to continue when the appropriate driver for the device is selected. 5. Click yes in the digital signature not found window to continue. - 6 -.
6. Follow on-screen instruction to complete installation. 7. Click finish when the installation done. Window me installation 1. Boot up computer to windows me. Make sure the cardbus 10/100 fast ethernet pc card is well connected to the cardbus socket. 2. The system will automatically detect the card...
3. Insert the installation disk into the disk drive and select removable media (floppy, cd-rom…) and click next . 4. Click next to continue when the appropriate driver for the device is selected. 5. Follow on-screen instruction to complete installation. 6. Click finish when the installation done. Wi...
Driver. Click install from a list or specific location… and click next to continue. 2. Insert the installation disk into the floppy disk driver. Select search for the removable media(floppy, cd-rom…) and click next to proceed. 3. Windows will start searching for the appropriate driver for the instal...
4. Click finish when the installation done. - 10 -.
