Abocom HSM1402 Specification Sheet
HSM1402
Manageable 14-port HomePNA Plus 2 Fast Ethernet Switch
INTRODUCTION
The manageable 14-port HomePNA Switch is a device utilizing the existing telephone wiring within a building to
deliver data and does not interrupt regular voice services. Data and voice run simultaneously on the same pair of
wire without any rewiring. It is suitable for hotel/motel, multi-tenant apartment, multi-tenant commercial,
multi-tenant student dorm, campus and local loop. This switch supports a concentrator mode, where each of the
ports is dedicated to directly communicate with the Uplink/downlink ports. This mode ensures that data from any of
ports 1-14 cannot be directly seen by another port. This feature, therefore, provides data privacy to subscribers.
LINE1
LINE2
PNA1
PNA2
LINE3
LINE4
PNA3
PNA4
LINE5
LINE6
PNA5
PNA6
LINE7
LINE8
PNA7
PNA8
LINE9
LINE10
PNA9
PNA10
LINE11
LINE12
PNA11
PNA12
LINE13
LINE14
PNA13
PNA14
Console
UPLINK
(Management)
DOWNLINK
1
3
5
7
9
11 13
2
4
6
8
10 12 14
HomePNA
EtherNet
Power
Warning
100
LINK/
100
LINK/
The manageable 14-port HomePNA Switch is designed to eliminate unnecessary network traffic, and relieve
congestion by delivering dedicated bandwidth for each of the ports. Able to begin operating after power-up, the
switch will learn addresses automatically, and begin forwarding packets at full wire-speed to any of the outputs.
Additionally, this switch comes with the full network management functions such as SNMP, Web-browser, Telnet,
Windows GUI tool and Local Console management. Moreover, the switch can be operated stand-alone or can be
cascaded to stack up with multiple units to provide low cost network solutions.
SPECIFICATIONS
Network Connection
Totally 14 HomePNA 1.1 ports, each port has 2 RJ-11 connectors
One has built-in low-pass filter for PBX/PSTN connection
The other is passing-through for HomePNA client connections
The transmitting power for each HomePNA port can be adjusted
The receiving threshold for each HomePNA port can be adjusted
2 10/100 Fast Ethernet ports
Compliant with IEEE802.3/802.3u, 10/100BASE-TX standard
Full Duplex supported
IEEE 802.3x compliant Flow Control supported for full-duplex
Advanced MDI/MDIX auto crossover feature
1 Console port for out-of-band management
Switching and Management Function
Switching functions
Layer 2 switching based on MAC address
Store and Forward packet switching
Broadcast Storm rate filtering
8K MAC address table supported
Port-based VLAN supported(up to 14 VLAN groups)
Overlapping VLAN supported
Management functions
SNMP MIB I management agent supported
Windows GUI configuration/management program supported
Local console management supported
Telnet management supported
Web management supported
- 1 -