M73-apo07-460 24-port fast ethernet switch quick installation guide.
Fcc regulatory statements fcc certification, part15, class a this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipme...
- 1 - introduction the 24-port fast ethernet 10/100mbps n-way switch provides you a flexible, reliable, and affordable solution for an ethernet network. It comes with twenty-four independent 10base-t/100base -tx ports. Each port delivers up to 200mbps throughput, and is able to operate in either hal...
- 2 - parts names and functions front panel: led indicators status led color solid flashing power green becomes solid green when power is turned on. N/a link/act green successful connection sending or receiving packets rear panel: power port.
- 3 - hardware installation the switch is considered as a “plug and play” network device and requires no special setup procedures. Connect the power cord and cables correctly and you are ready to go. Switch installation 1. Put the switch on the appropriate location. When you install the switch, ther...
- 4 - specification standards ieee 802.3 10base -t ethernet ieee 802.3u 100base -tx fast ethernet ieee802.3x flow control protocol csma/cd ports twenty four 10/100mbps rj-45 ports (support auto-mdi/mdix) switching scheme store-and-forward flow control full duplex: ieee802.3x half duplex: back pressu...
