8-port fast ethernet 10/100mbps n-way switch user’s guide m73-apo09-200
Fcc regulatory statements part15, class b this device complies with part 15 of fcc rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2. This device must accept any interface received, including interface that may cause undesired operatio...
Introduction the 8-port fast ethernet 10/100mbps n-way switch provides you a flexible, reliable, and affordable solution of the ethernet network. It comes with eight independent 10base-t /100base-tx ports. Each port delivers up to 200mbps throughput, and is able to operate in either half or full-dup...
Each ethernet port supports mdi/mdix auto crossover capacity 2k mac address with automatic learning and 5-minute aging 8 (eight) 10/100mbps auto-detection ports dimension (wxdxh): 190mm x 78mm x 32mm automatic power saving 8 x rj45 stp/utp network ports on rear panel maximum 100m per port hub-to-hub...
Parts names and functions front panel led indications led status description power on power on on a valid connection link/act blinks receives packets on connects to a 100mbps fast ethernet connection spd off connects to a 10mbps ethernet connection ethernet ports (1-8) ethernet ports with mdi/mdix a...
Hardware installation hub installation the hub is considered as a “plug and play” network device and requires no special setup except for plugging the appropriate power cord and cables. 1. Put the hub on the appropriate location. When you install the hub, there are two things needed to be considered...
