Abocom Wireless Router FSW410 Quick Installation Manual

802.11g Wireless Router 

Quick Installation Guide 

Before you begin, ensure that the Wireless Router, the 

DSL/Cable modem and PC are turned off. 

Use a standard RJ-45 Ethernet cable to Connect your 

DSL/Cable Modem to the Internet port on the  Wireless 

Router. 

Connect an Ethernet cable to one of the LAN ports on the 

back of the Wireless Router to the Ethernet port on your 

PC. 

Turn on the DSL/Cable modem first. 

Then turn on your wireless router. 

Check the LEDs: 

•  The Power, Internet, and WLAN LEDs should be 

ON. 

•  For each active LAN (PC) connection, the LAN 

Activity LEDs (1-4) should be ON. 

Application Diagram 

Turn on your PC. 

        Notes 

Before setting up the Wireless Router, make sure your PCs 

are configured to "Obtain an IP (or TCP/IP) address 

automatically".

Please refer to the User's Guide found on the CD.

1. Go 

to 

Start 

Æ Control PanelÆ Network and Internet 

ConnectionsÆ (Right-click on) Local Area 

Connection Properties.

2.  Make sure the box next to Internet Protocol (TCP/IP) 

is checked. Click the Internet Protocol (TCP/IP) and 

click the Properties button.

3.  Select "Obtain an IP address automatically". 

Select "Obtain DNS server address automatically".   

Then click OK to complete the PC configuration. 

4.  Restart your computer. 

For Windows 98/ME/Macintosh 

For Windows 2000 & XP 

Connect the 802.11g Wireless 

Router 

Router Configuration 

(for Internet Access) 

After you've done the above steps and restarted your 

computer,    for Windows 2000 & XP users, your 

computer should obtain an IP Address automatically 

from the Wireless Router's

DHCP Server. 

Start your WEB browser. In the Address box, enter 

HTTP://192.168.1.254

The following screen will come up. Type "admin" into 

the User name field. Leave the Password field blank and 

enter OK. 

M73-APO01-880