Abode ADHSC3001 Pro+ User Manual

Manual is about: pro+ Handheld Steam Cleaner

Summary of ADHSC3001 Pro+

  • Page 1

    Model no: adhsc3001 pro+ handheld steam cleaner user guide for customer services & spare parts please call 0845 209 7461 opening times: monday - friday 8am – 6pm & saturday 9am – 1pm or visit us at www.Productcareuk.Com important: retain for future reference.

  • Page 2: Contents

    For customer services & spare parts please call 0845 209 7461 opening times: monday - friday 8am – 6pm & saturday 9am – 1pm or visit us at www.Productcareuk.Com contents 2 page safety instructions …………………………….……….. 3 steam cleaner feature diagram ………………………………....….. 6 unpacking your steam cleaner ……...

  • Page 3: Safety Instructions

    3 safety instructions warning: it is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts. If the supply cord is damaged, it must be replaced by the manufacture...

  • Page 4: Safety Instructions

    Safety instructions 4 • do not direct steam at people, animals, electrical outlets, or equipment containing electrical components. • unplug from outlet when not in use. Do not leave the steam cleaner unattended while plugged in. • do not use with damaged cord or plug. • do not use steam cleaner if i...

  • Page 5: Safety Instructions

    5 safety instructions symbol iec 60417-5597 (2002-10) is used on the unit to indicate the following that this unit operates with hot water vapour (steam), to avoid scalding and burns take extra care when in use. • never remove parts from the appliance, such as the screws. • the filling aperture must...

  • Page 6

    6 steam cleaner feature diagram 1. Nozzle 2. Safety cap 3. Safety pressure indicator (red pin) 4. Steam trigger 5. Detergent solution control dial 6. Handle grip 7. Water tank 8. Power and steam ready indicator light (red indicates power on and green indicates ready to steam) 9. Detergent solution t...

  • Page 7: And Refer To Page 22.

    7 unpacking your steam cleaner before using your steam cleaner remove all packaging and lay out the separate components. Check the steam unit after unpacking for any visual damage such as: • misaligned or damaged parts • damage to the main body and separate components • damage to the plug or cable. ...

  • Page 8

    Always unplug the unit before removing the safety cap. 8 using: filling the water tank add 250ml of cold tap water to the filler cup. Empty the filler cup carefully into the water tank. Turn the safety cap anti-clockwise and remove . Place the steam cleaner on a level surface..

  • Page 9: Re-Filling The Water Tank

    9 using: filling the water tank re-filling the water tank unplug and allow the unit to cool. After approximately 5 minutes, when the unit has cooled sufficiently, the red pin on the safety cap will release to allow for removal. This is a pressure release valve. You can speed up the cooling time if y...

  • Page 10

    Disconnect the power cord from the mains socket. 10 using: filling the detergent tank take hold of the unit and squeeze the tabs on the side of the tank as shown, then slide the tank out of the steam cleaner to remove. Turn the safety cap anti-clockwise and remove from the detergent tank. For regula...

  • Page 11: Using Your Steam Cleaner

    11 using your steam cleaner operating the steam cleaner before you plug the appliance in, check the water tank is full. If it is not, refer to page 8. Plug the mains plug into a socket. The red power indicator light will illuminate. If the light does not illuminate, refer to page 17 for problem solv...

  • Page 12: Using Your Steam Cleaner

    12 using your steam cleaner using the solution control dial the solution control dial does not adjust the amount of steam, it only controls the amount of cleaning solution that is added to the steam. To clean with steam alone, simply turn the solution control dial to “off”. Check the detergent tank ...

  • Page 13: Using Your Steam Cleaner

    13 using your steam cleaner attaching the main tools the two main accessories for this product are the extension hose and concentration nozzle. They both attach to the unit in the same manner. 75cm flexible hose: for cleaning hard to reach areas. Attach to unit and use with the accessory nozzle atta...

  • Page 14: Using: Accessories

    Window cleaning attachment/upholstery and garment steaming tool: (2-in-1 combi attachment) the squeegee shown in fig. D is ideal for cleaning windows, tiles and mirrors. Fig. E shows the upholstery/garment tool. After attaching you can use this to efficiently steam upholstery and clothes. D e 14 usi...

  • Page 15: Storing Your Steam Cleaner

    Allow the device to cool before removing attachments. After approximately 5 minutes, when the unit has cooled sufficiently, the red pin on the safety cap will release to allow for removal - this is a pressure release valve. You can speed up the cooling time by releasing the steam pressure by pressin...

  • Page 16: Cleaning And Care

    Before you clean the appliance, disconnect the mains plug from the wall socket. To clean the exterior of the device, use a damp, soft cloth and mild detergent. Never immerse the steam unit in water. When wiping off the main body, do not allow moisture in the area around the indicator light. Wash non...

  • Page 17: Problem Solving

    Problem solving problem possible problem possible solution trouble assembling/ disassembling attachments 1. Trouble assembling attachments 1. There are a number of attachments that can be used with this steam cleaner. For information on attaching the main tools, such as the flexible hose and the str...

  • Page 18: Problem Solving

    Problem solving problem possible problem possible solution there is no or reduced steam being produced/no power to the steam cleaner 1. The cleaner has not had time to heat. 1. Once the water thank is filled, switch the cleaner on at the plug. This should illuminate the power indicator light red. En...

  • Page 19: Problem Solving

    Problem solving steam cleaner is emitting water 1. The water has not had time to heat. 1. Wait 4 minutes or until the indicator light illuminates green. 2. Too much water is in the tank 2. Empty the water from tank and refill with up to 250ml of water. The indicator lights are not working 1. The uni...

  • Page 20: Problem Solving

    Problem solving problem possible problem possible solution parts have broken/need replacing 1. An attachment has broken or been lost. 1. Page 23 of the instruction manual provides details of which attachments can be replaced. Call customer services or visit the website detailed at the bottom of this...

  • Page 21: Guarantee

    21 guarantee this product is guaranteed for 12 months from the date of the original purchase. If any defect arises due to faulty materials or workmanship the faulty product must be returned to the place of purchase. Refund or replacement is at the discretion of the retailer. The following conditions...

  • Page 22: Customer Services

    22 customer services this symbol is known as the 'crossed-out wheelie bin symbol'. When this symbol is marked on a product/batteries, it means that the product/batteries should not be disposed of with your general household waste. Only discard electrical/electronic/battery items in separate collecti...

  • Page 23: Spare Parts

    23 spare parts safety cap straight nozzle window cleaner/upholstery attachment garment steamer cloth round brush (nylon) round brush (metal) crevice brush scraping tool angled nozzle filler cup 75cm flexible hose the following spare parts are available to purchase online or by calling product care. ...

  • Page 24

    24 connection to the mains supply warning- this appliance must be earthed this appliance is designed to operate from a mains supply of ac230v - 240v ~ 50/60hz. Check that the voltage marked on the product corresponds with your supply voltage. This product is fitted with a 13a plug complying with bs1...

  • Page 25

    25 connection to the mains supply for uk use only – plug fitting details (where applicable): as the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: the green/yellow wire is the earth an...

  • Page 26: Model Number: Adhsc3001

    Model number: adhsc3001 r3a.