- DL manuals
- Abode
- Steam Cleaner
- ASM5001
- User Manual
Abode ASM5001 User Manual
Summary of ASM5001
Page 1
Model no: asm5001 steam mop user guide for customer services & spare parts please call 0845 209 7461 opening times: monday - friday 8am – 6pm & saturday 9am – 1pm or visit us at www.Productcareuk.Com important: retain for future reference.
Page 2: 0845 209 7461
For customer services & spare parts please call 0845 209 7461 opening times: monday - friday 8am – 6pm & saturday 9am – 1pm or visit us at www.Productcareuk.Com contents 2 page safety instructions …………………………….……….. 3 steam mop feature diagram ………………………………....….. 6 steam mop assembly ……………………………….……....
Page 3: Warning:
Warning: it is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent o...
Page 4: Safety Instructions
Safety instructions • do not direct steam at people, animals, electrical outlets, or equipment containing electrical components. • unplug from power outlet when not in use. Do not leave steam mop unattended while plugged in. • do not use with damaged cord or plug. • do not use steam mop if it has be...
Page 5: Toxic Vapors.
• the filling aperture must not be opened during use. • do not use appliance in an enclosed space filled with vapor given off by oil-based paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapors. • do not use on leather, wax polished furniture or floor...
Page 6: Steam Mop Feature Diagram
1 upper handle 6 steam dial 2 handle connector 7 power indicator light 3 lower handle 8 mop head 4 water tank cap 9 mop pad 5 water tank 10 measuring jug 11 carpet glider 6 steam mop feature diagram 1 3 5 7 9 10 11 6 4 2 8.
Page 7: Steam Mop Assembly
7 steam mop assembly before using your steam mop: remove all packaging and lay out the separate components. Check the steam mop after unpacking for any visual damage such as: • misaligned or damaged parts • damage to the main body and separate components • damage to the plug or cable. If you can see...
Page 8: Note:
8 using: filling the water tank insert the assembled handle into the slot of the main body behind the water tank, as per the diagram below. Ensure it is fully pushed in, so the black clip is visible in the main body. Attach the mop pad, aligning the velcro with the base of the mop head. Note: do not...
Page 9: Using Your Steam Mop
9 using your steam mop note: fully vacuum and sweep the floors prior to using the steam mop. Release the power cord, plug the steam mop into a mains socket and switch the power on. When the steam mop is plugged in, the indicator light will illuminate. After 60 seconds, the mop is ready to use. Turn ...
Page 10: Using Your Steam Mop
10 using your steam mop if you wish to steam clean hard floors, continue to use the mop pad. If you wish to steam clean carpets, add the plastic carpet glider to the mop pad by gently sitting the mop head in it. Note: the steam cleaner does not clip into the carpet glider. When the mop stops emittin...
Page 11: Storing Your Steam Mop
11 storing your steam mop switch the power off at the plug socket and remove the plug. After use, turn the steam dial 180° clockwise from the ‘open’ to the ‘close’ position. Note: be careful not to force the dial further than the position in which it stops. Allow the mop pad to fully cool and then c...
Page 12: Cleaning And Care
12 cleaning and care before you clean the appliance, disconnect the mains plug from the wall socket. To clean the exterior of the device, use a damp, soft cloth and mild detergent. Never immerse the steam mop in water. When wiping off the main body, do not allow moisture in the area around the indic...
Page 13: Problem Solving
Problem solving problem possible problem possible solution trouble assembling steam mop 1. Difficult to attach mop head. 1. The main body of the product can be pushed down into the nozzle of the mop head. Ensure the groove is aligned correctly with the body. Refer to page 7 of the instruction manual...
Page 14: Problem Solving
Problem solving problem possible problem possible solution the indicator light is not working 1. The unit may not be plugged in properly/the fuse or breaker may not be working. 1. Verify the unit is plugged securely into an approved electrical outlet and that the fuse or breaker is functioning prope...
Page 15: Guarantee
15 guarantee this product is guaranteed for 12 months from the date of the original purchase. If any defect arises due to faulty materials or workmanship the faulty product must be returned to the place of purchase. Refund or replacement is at the discretion of the retailer. The following conditions...
Page 16: Customer Support
16 customer support attach your receipt to this page for proof of purchase. This symbol is known as the 'crossed-out wheelie bin symbol'. When this symbol is marked on a product/batteries, it means that the product/batteries should not be disposed of with your general household waste. Only discard e...
Page 17: Spare Parts
Spare parts carpet glider mop pads filler cup mop head handle/ handle connector water tank lid the following spare parts are available to purchase online or by calling product care. Visit us at www.Productcareuk.Com or call 0845 209 7461 opening times: monday - friday 8am – 6pm & saturday 9am – 1pm ...
Page 18: Warning-
18 connection to the mains supply warning- this appliance must be earthed this appliance is designed to operate from a mains supply of ac230v - 240v ~ 50/60hz. Check that the voltage marked on the product corresponds with your supply voltage. This product is fitted with a 13a plug complying with bs1...
Page 19
19 connection to the mains supply for uk use only – plug fitting details (where applicable): as the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: the green/yellow wire is the earth an...
Page 20: Model Number: Asm5001
Model number: asm5001 r3.